Item with ID 266 has been added to your cart.

Showing 1 - 24 of 317 Weapons





MACHINE GUNS

Catco Sterling 9mm SMG

The Catco Sterling 9mm SMG submachine gun is constructed entirely of steel and plastic and has a shoulder stock, which folds underneath the weapon. There is an adjustable rear sight, which can be flipped between 100 and 200-yard settings. Although of conventional blowback design firing from an open bolt, there are some unusual features: for example, the bolt has helical grooves cut into the surface to remove dirt and fouling from the inside of the receiver to increase reliability. There are two concentric recoil springs that cycle the bolt, as opposed to the single spring arrangement used by many other SMG designs. This double-spring arrangement significantly reduces “bolt-bounce” when cartridges are chambered, resulting in better obturation, smoother recoil, and increased accuracy. Additionally, the Sterling uses a much-improved (over the Sten) 34-round curved double-column feed box magazine, which is inserted into the left side of the receiver. The magazine follower, which pushes the cartridges into the feed port, is equipped with rollers to reduce friction. The bolt feeds ammunition alternately from the top and bottom of the magazine lips, and its fixed firing pin is designed so that it does not line up with the primer in the cartridge until the cartridge has entered the chamber. The Sterling employs a degree of what is known as Advanced Primer Ignition, in that the cartridge is fired while the bolt is still moving forward, a fraction of a second before the round is fully chambered. The firing of the round thus not only sends the bullet flying down the barrel but simultaneously resists the forward’s movement of the bolt. By this means it is possible to employ a lighter bolt than if the cartridge was fired after the bolt had already stopped, as in simple blowback, since the energy of the expanding gases would then only have to overcome the bolt’s static inertia (plus spring resistance) to push it back again and cycle the weapon; whereas in this arrangement some of this energy is used up in counteracting the bolt’s forwards momentum as well, and thus the bolt does not have to be so massive. The lighter bolt makes not only for a lighter gun, but a more controllable one since there is less mass moving to and fro within it as it fires. The suppressed version of the Sterling (L34A1/Mk.5) was developed for covert operations. This version uses a ported barrel surrounded by a cylinder with expansion chambers. The Australian and New Zealand SAS regiments used the suppressed version of the Sterling during the Vietnam War. It is notable for having been used by both Argentinian and British Special Forces during the Falklands War. A Sterling was used by Libyan agents to kill WPC Yvonne Fletcher outside the Libyan Embassy in London, which sparked the 1984 siege of the building. The Sterling has a reputation for excellent reliability under adverse conditions and, even though it fires from an open bolt, has good accuracy. With some practice, it is very accurate when fired in short bursts. While it has been reported that the weapon poses no problems for left-handed users to operate, it is not recommended without the wearing of ballistic eye protection. The path of the ejected cartridge cases is slightly down and backward, so mild burns can occasionally be incurred by left-handed shooters. A bayonet of a similar design as that for the L1A1 Self-Loading Rifle was produced and issued in British Army service but was rarely employed except for ceremonial duties. Both bayonets were derived from the version issued with the Rifle No. 5 Mk I “Jungle Carbine”, the main difference being a smaller ring on the SLR bayonet to fit the rifle’s muzzle. When mounted, the Sterling bayonet was offset to the left of the weapon’s vertical line, which gave a more natural balance when used for bayonet-fighting. For a right-handed shooter, the correct position for the left hand while firing is on the ventilated barrel-casing, but not on the magazine, as the pressure from holding the magazine can increase the risk of stoppages, and a loose magazine can lead to dropping the weapon. The barrel-casing hold provides greater control of the weapon, so the right hand can intermittently be used for other tasks. A semi-circular protrusion on the right-hand side of the weapon, approximately two inches from the muzzle, serves to prevent the supporting hand from moving too far forward and over the muzzle.

AMMO

500 Round Case Sig Sauer E45AP250 Elite V-Crown 45 ACP 230 gr JHP

Manufacturer Sig Sauer Caliber .45 ACP Number of Rounds For Sale Per Quantity 1 500 UPC GTIN SKU E45AP2-500 Mfg Part Number Weight

AMMO

Federal American Eagle 9mm Luger Ammo 115 Grain FMJ Value Pack 500 Rounds

Please read the Item Characteristics for important listing details. Need more information? Need to email the seller? Ask Seller a Question. Federal American Eagle 9mm Luger Ammo 115 Grain Full Metal Jacket Value Pack 500 Rounds Manufacturer: Federal Caliber: 9mm Grains: 115 Bullet Type: FMJ Description: Federal American Eagle 9mm Luger Ammo 115 Grain Full Metal Jacket Value Pack 500 Rounds WI residents must pay 5.5% Sales tax. Please E-mail Us with ANY Questions!!

MACHINE GUNS

AGM Maschinengewehr MG42 Full Metal AEG Airsoft Machine Gun w/ Drum Magazine

The innovative minds over at AGM pulled all stops to produce a truly authentic WWII era MG42 airsoft replica. Originally the MG42 was designed in Nazi Germany to be a lost cost alternative to the MG34 and was used exclusively by the Wehrmacht and Waffen-SS units during the second half of World War II. Due to its highest rate of fire and long lasting reliability, the MG42 was adopted by multiple armed forces at the end of the war. This full size replica from AGM is constructed fully from steel to match the feel and integrity of its 7.62mm brother. Alongside full metal externals, real wood is used for the ergonomically designed pistol grip and removable fixed stock, which houses the included battery. A functional mock charging handle adds to the realism of this airsoft replica. Utilize the adjustable hop-up located under the steel vented handguard to account for various target range and BB weight, for the most accurate shot every time. Players can use the adjustable flip-up front and rear sights to quickly and accurately zero in their targets without the need for an additional optic accessory. An included full metal bipod assists in keeping the MG42 stable when laying down cover fire, and can be folded against the rifle for easy transportation when changing positions. To match the rugged externals, AGM outfitted this AEG with a custom full metal gearbox; easily withstanding high energy output from LiPO batteries. Although a truly unique gearbox is used for the MG42, it is still fully upgradable with Version 2 aftermarket internals. The MG42 can lay down an impressive rate of fire, so AGM included a 2,500 round drum magazine to fully maximize this guns full potential. The drum magazine is designed to fit snug against the rifle to retain a low-profile, and features auto-winding technology saving you precious time during reloads. AGM made sure the MG42 comes skirmish ready by including a 8.4v 1100mAh NiMH battery and standard wall charger with every package. This heavyweight replica is perfect for authentic MIL-SIM events and reenactments, covering all bases for airsoft enthusiasts. The new Maschinengewehr MG42 Full Metal AEG from AGM is a truly one of a kind machine that is sure to resonate with airsoft enthusiasts of all play styles. Features: Color: Black / Real Wood 420 FPS (0.20g BB) Magazine: 2500rd Weight: 16lbs. Inner Barrel: 600mm 8.4v 1100mAh NiMH Battery & Wall Charger INCLUDED Full Metal Custom Gearbox (Version 2 Compatible) Stamped Steel Receiver & Vented Handguard Genuine Wood Pistol Grip Panels & Stock Functional Mock Charging Handle Removable Steel Folding Bipod Auto-Winding 2,500 Round Drum Magazine (5x AA Batteries NOT INCLUDED) Adjustable Flip-up Front & Rear Sights Full Size WWII Replica Adjustable Hop-up Safe / Full Auto

AIRSOFT GUNS

ASG Steyr Scout Airsoft Sniper Rifle, Black

The original Scout rifles were manufactured by the Austrian Steyr Arms, but this realistic replica from ActionSportGames and Modify is perfect to bring the piece to airsoft matches. Video games like Counter-Strike popularized this weapon design, making it one of the most memorable pieces of the 20th century onwards. This re-creation brings the Scout rifle’s unique properties to airsoft fields. The rifle is made from CNC-machined aluminum and steel parts, with further nylon and polymer reinforcement and attachments. This gives the rifle a realistic feel and weight. The outside appearance is a true-to-life copy of the original rifle design, down to the spare magazine storage in the back of the stock. In order to behave like a sniper rifle, the Steyr Scout has flip-up front and rear sights, although most users will upgrade to custom sights on the Pic rail on the barrel. The rifle comes with a foldable bipod design near the front of the barrel to facilitate proper handling and positioning. The nylon polymer stock has an attachment point for bipod rails should users want a customized solution. Upgraded straight from the factory, this rifle can compete and outmatch most customized sniper rifle builds with minimal effort and add-ons. The factory upgrades include an upgraded M140 spring system, which can hold an M190 spring without any adjustments necessary. The rifle also has 60-degree Modify Predator hop-up bucking to make full use of the enhanced hop-up. The Scout’s exteriors were designed to absorb shocks, and the mechanism parts were created to be as silent as possible. Features: Length: 1m/39.4 inches Barrel length: 14.2 inches Weight: 6.5 lbs Color: black Magazine capacity: comes with a 32 BB stock magazine, fits a spare magazine FPS: 443-450 Recommended ammo: 0.36g BBs and above, 0.4g optimal Adjustable hop-up Type: spring.

RIFLES

BERETTA ARMS ARX100

The Beretta ARX 100 . 223 REM/5.56 NATO Semiautomatic Rifle is a fully modifiable rifle with a pinless design and Picatinny rails on the top, sides and fore-end. The rifle is equipped with a removable, adjustable flip-up rear sight and features a 30-round magazine and a short-stroke gas piston system. UPC ECOM00025968 Caliber 223 REM/5.56 NATO Finish BLACK Capacity 15 ROUNDS Weight NOT SPECIFIED Action NOT SPECIFIED Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length NOT SPECIFIED Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

RIFLES

AR-15s: Pistol or SBR

AR-15 pistol is a classification that exists due to some silly American gun laws and definitions. An AR pistol cannot have a stock, but can have a bare and exposed buffer tube. Another no-no is a vertical grip, but an angled grip like the Magpul AFG is legal. Now of course nobody wants to run afoul of the Federal Government, so it’s imperative that you understand what makes an SBR an SBR, and what makes AR pistols legal. It may appear to be complicated and obfuscated but the defining characteristics are pretty straight forward if you know what you’re looking for. AR-15 pistols can have barrels as short as you want them to. Personally, I own an AR-15 pistol with a 7.5-inch barrel and, while it is ridiculous, it’s a lot of fun. Over the last few years, the popularity of AR-15 pistols has grown significantly. This growth is mostly tied to the advent of stabilizing braces. Stabilizing braces turned a gaudy, heavy, and awkward gun into a stable, comfortable-to-shoot weapon. Why Would I Want One? We won’t dive too deep into the NFA, but the section that concerns this article is the law that rifles must have 16-inch barrels, or else they are regulated under the NFA. So, if you wanted an AR-15 with a 7.5-inch barrel, you’d have to pay a tax stamp, ask for permission, and wait for 3 to 6 months for approval. Once approved you could then own an SBR. Or you could just buy an AR pistol and skip all that. There are a lot of other reasons you might want an AR pistol, besides just the tax stamp.

AIRSOFT GUNS

G&G CMF-16 AEG Airsoft Rifle, Black

G&G’S CMF-16 is a gun that combines reliable performance and cost-efficiency. The weapon has many features that will enhance your skirmish experience. For instance, the gun has a high-capacity metal magazine that holds 450 rounds. There are also iron sights you can adjust, a rotatory hop-up, and an outer barrel with flash hider. What’s more, the model has a highly-dependable 4th Generation MOSFET. It’s especially useful since it harnesses energy directly from the battery. Accordingly, you get a higher fire rate and faster trigger responses. In addition, your trigger contacts have burnout protection with this technology. The weapon is packed with more handy features. For example, you can use your ambidextrous magazine release, selector lever, along with the ambidextrous bolt lock and release. This makes it ideal for left-handed players as well. Finally, the bolt lock makes it much easier for you to adjust the rotatory hop-up, and your CMF-16 weapon comes with a 90-day warranty period. Features: 380 FPS 450-Round Metal Magazine Adjustable Iron Sights Rotatory Hop-Up Outer Barrel with Flash Hider 4th Generation MOSFET Ambidextrous Magazine Release and Selector Lever Ambidextrous Bolt Lock and Release Polymer Receiver and Rail Note: Battery and Charger sold separately. (G-11-041, G-11-056, G-11-063 recommended)

AMMO

600 FEDERAL NATO 5.56 62 GR LC M855 556 XM855

5.56mm 62 grain M855 ammunition features a FMJ steel core penetrator spitzer boat-tail bullet, with a green bullet tip. The M855 projectile has much-improved penetration characteristics over the old M193 55-grain projectile at all ranges, resulting in higher retained velocity and greater accuracy at long range. The 5.56mm M855 is ideal for use in AR15, M16 and M4 rifles. ITEM INFO CATEGORY: Ammo TYPE: Ammunition BRAND: Lake City MODEL: XM855 CALIBER: 5.56mm NATO TECH SPECS CAPACITY: 600 WEIGHT: 19 MATERIAL: Gold SIGHT: Fixed PURPOSE: Ammunition

MACHINE GUNS

CZ 805 BREN A2 10.9 INCH POST SAMPLE MACHINE GUN

A uniquely original CZ 805 BREN A2 assault rifle replica made under full license by ?eská zbrojovka a.s. by ASG. The receiver was made from metal, similarly to mounting rails, fire mode selector plate and external barrel. The lower part of the receiver consisting of a pistol grip and a magazine socket made from very elastic polymer with an interesting, rough texture. Similar case concerns the stock and the stock slide. In order to manufacture elements that join the replica, such as pins, screws as well as the flash hider or the shell ejection window cover, the manufacturer has used steel, which is always a nice looking addition. The replica contains a gearbox V3 with a reinforced metal skeleton that conceals a polycarbonate piston and its perforated head (during air compression, a seal is pressed against the sides of the piston, which results in its better tightness).Steel gears are mounted on 7 mm bearings. Parts of the entire construction fit very well together and the fact that it is a gearbox V3 allows the user to rest easily and not to worry about the availability of parts or their compatibility. ITEM INFO CATEGORY: Machine Guns TYPE: Machine guns BRAND: CZ MODEL: BREN A2 CALIBER: 5.56mm TECH SPECS CAPACITY: 30 WEIGHT: 45 MATERIAL: Black SIGHT: Fixed PURPOSE: MACHINE GUNS

RIFLES

POLAND WBP FOX POLISH AK74 FIXED WOOD STOCK

Up for sale is an Excellent Condition Ultra Rare Wytwornia Broni Jacek Popinski Fox AK74 Polish 5.56 Semi Automatic rifle. This was custom built by Horse Shoe Firearms, LLC in Horse Shoe North Carolina. This kit is all factory new WBP fox with AK Builder 5.56 Barrel and Childers CG556 receiver. There is virtually no wear on this firearm as pictured and has been test fired for functionality. Includes one original 30rd clear smoke Polish 5.56 magazine as shown. UPC ECOM00170400 Caliber 5.56 NATO Finish BLACK Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16.25 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

AMMO

Caliber Case 9mm – Custom-made Black Walnut Mini Ammo Box

Caliber Case 9mm – Custom-made Black Walnut Mini Ammo Box Each box holds 18-rounds and is complete with 2 hidden brass hinges and 2 Neodymium magnets to provide a secure fit for the top and bottom of the box, along with the laser engraved inscription of the Second Amendment. Each box is constructed of Black Walnut and finished with a satin lacquer finish. The individual caliber is laser engraved in the top of the box, along with the Gadsden flag design, featuring the snake & text, Don't Tread on Me. These boxes make great gifts for the firearms enthusiast, wedding / best man or woman gifts or pick up several for yourself! Each box is custom-made to order. Your Caliber Case will ship within 5 days of placing the order. Thank you! (Ammo not included)