If you are looking for a new unique primary weapon for your arsenal, then G&G has got you covered! The G&G ARP 556 CQB AEG Airsoft Gun is the bigger M4 magazine capable full metal brother of ARP9. This gun is designed to be an absolute CQB monster capable of maneuvering through those close quarters battle environments while keeping your profile small and being easy to point. The G&G CM16 ARP9 Carbine is a compact SMG constructed of full metal to ensure long lasting durability while also making this weapon realistically weighted and ready for any airsoft encounter. The short inner barrel makes this weapon ideal for CQB engagements while still being powerful and accurate enough for long range battles as well. The G&G ARP 556 is a unique and exciting entry into CQB M4 style rifle combat. At the rear of the rifle is a retractable PDW style stock to house a 11.1v LiPo battery (Not Included) and also ensures players of any size can use this rifle comfortably in any situation. Utilize the 5” Milspec MLOK rail on the front of the rifle to attach rail segments for the installation of a wide variety of tactical accessories. Customize your CM16 ARP 556 Carbine with your choice of optic accessory thanks to the RIS top rail, to fully optimize your airsoft gun to its maximum potential. The integrated adjustable flip-up iron sights are perfect for zeroing in your target as is, or can be flipped-down out of the way for your choice of optic accessory. A traditional full metal G2 gearbox from G&G was used, featuring 8mm bearing and bushing set to ensure rapid and smooth gear change and less maintenance needed. G&G has also installed a pre-programmed MOSFET chip that is able to stop batteries such as LiPo from overdrawing and becoming dangerous. The MOSFET is also programmable to fire from full auto to three-round burst. The Electronic Trigger Unit increases overall trigger response and assists in preventing burnouts or locks in rapid semi-auto firing. By combining a rugged full metal build with the power and accuracy needed to out-gun the competition, G&G has created an AEG that will surely resonate with players of all skill levels and play styles. Features: Color: Black 350 FPS (0.20g BB) Magazine: 450rds Weight: 4lbs Inner Barrel: 128mm 14mm Counter Clockwise Thread 11.1v LiPo Stick Battery (NOT INCLUDED) Full Metal Construction Full Metal Version 2 Gearbox Pre-installed MOSFET Electronic Trigger Unit (ETU) Ambidextrous Controls Adjustable Hop-up PDW Style Adjustable Stock & Battery Housing 5” Milspec MLOK Handguard Rail Ergonomic Motor Grip Enhanced Trigger Guard Flat Faced Competition Style Trigger Three Round Burst Capabilities Adjustable Iron Sights Safe/Semi/Full Auto (Burst Option) Note: Battery and Charger DOES NOT come with purchase of this rifle
The long-awaited special forces Russian VSS Vintorez sniper rifle replica is here, an object of desire for many enthusiasts of Russian Weaponry and authentic replicas. It is made with great attention to details and keeping the dimensions, weight, and structural details correct to those of the original firearm. The Highest quality materials were used in the production process of the airsoft Vintorez including real steel one-piece silencer and steel receiver cover charging handle. The gun maintains its reasonable weight by constructing the lower receiver, fire and safety selectors, and trigger guard from a more light weight metal, aluminum; and by using a strong polymer for the front grip. The natural painted real wood stock is a real eye catcher right out the box., it gives the Vintorez replica a unique and unmistakable look. The stock has an integrated thick rubber shoulder pad on the end of the stock, for maximum comfort. Disassemble this weapon almost exactly like its real steel counterpart by pressing the secure bolts out of their positions on the receiver cover, silencer and stock. The Vintorez features a SWD type side mounting rail on the left side of the rifle, allowing installation of various optic scope. Locate the safety switch located on the right side of the receiver and closely resemble that of an AK rifle. The fire selector switch, just like the original firearm, is located inside the trigger guard just behind the trigger. The accumulator can be stored inside the silencer, a three-part LiPo accumulator is recommended by the manufacturer but other stick type accumulators can be used with no problem. This replica is equipped with the updated and reliable Version 3 Gearbox with 7mm bearings to ensure the smoothness of gear changes inside the rifle. Easily tune and modify this weapon to your preference, however, the 400 FPS will have plenty players shaking in their boots. This feature combined with the long 420mm inner barrel make this replica a perfect weapon for CQB or long range engagements. Account for range and wind conditions by adjusting the high quality hop-up chamber with integrated airtight pneumatic system. LCT thought of everything and made this rifle both extremely unique and very functional. Features: Color: Black / Real Wood 450 FPS (0.20g BB) Magazine: 50rds Weight: 7.75 lbs. Inner Barrel: 425mm 6.03mm Brass Tight Bore 7.4v Nunchuck 2 or 3 Panel LiPo Battery (NOT INCLUDED) Real Wood Stock Adjustable Hop-up Version 3 Full Metal Gearbox Reinforced Steel Piston Adjustable Flip-up Rear Sight Integrated Mock Suppressor Full Steel Receivers Safe/Semi Auto Note: Battery and Charger DOES NOT come with purchase of this rifle
G&G’S CMF-16 is a gun that combines reliable performance and cost-efficiency. The weapon has many features that will enhance your skirmish experience. For instance, the gun has a high-capacity metal magazine that holds 450 rounds. There are also iron sights you can adjust, a rotatory hop-up, and an outer barrel with flash hider. What’s more, the model has a highly-dependable 4th Generation MOSFET. It’s especially useful since it harnesses energy directly from the battery. Accordingly, you get a higher fire rate and faster trigger responses. In addition, your trigger contacts have burnout protection with this technology. The weapon is packed with more handy features. For example, you can use your ambidextrous magazine release, selector lever, along with the ambidextrous bolt lock and release. This makes it ideal for left-handed players as well. Finally, the bolt lock makes it much easier for you to adjust the rotatory hop-up, and your CMF-16 weapon comes with a 90-day warranty period. Features: 380 FPS 450-Round Metal Magazine Adjustable Iron Sights Rotatory Hop-Up Outer Barrel with Flash Hider 4th Generation MOSFET Ambidextrous Magazine Release and Selector Lever Ambidextrous Bolt Lock and Release Polymer Receiver and Rail Note: Battery and Charger sold separately. (G-11-041, G-11-056, G-11-063 recommended)
Here for your consideration is an all original Colt Model 639 the commercial version of the XM177E2 a hard to find variant of the full auto M16 family. The Military issued these iconic weapons to the MACVSOG special operation units in Vietnam in1967 and 1968. They feature a 11.5 inch barrel ,forward assist, two position aluminum collapsing stock. This model also came with a Colt manufactured Moderator which served to change the sound signature when fired . Because of this the BATF considers the moderator as a suppressor as such this gun will require two NFA transfer tax stamps. Both the gun and moderator will transfer on a form 4 in Pa. These do not come around very often they are scarce and very few where made by Colt for the commercial market. Condition: Overall appearance and finish is pristine. Bore and bolt are excellent . This is surely an investment level firearm of the very highest order, so don't miss your chance to own this historic weapon built by Colt in the very early days of the M16 . Buyer pays all shipping and Transfer fees……..Feel free to email me with any questions you may have ….Thank you and good luck ! Get the best guns from us at mouth watering prices. only at outdoorsarmory.com
Classic British World War II SMG as used by the Royal Marine Commandos and the French Resistance. An authentic replica perfect for WWII re-enactors. Magazine Well Rotates under gun for storage Movable Charging Handle Rear Wired Gearbox Fixed Stock Battery Storage in Stock Adjustable Hop-Up Fixed Iron Sights Package Includes: AGM – STEN Rifle MK.2 50rnd Low Cap Magazine Stick Battery Charger Cleaning / Un-jamming Rod SPECIFICATIONS Length: 770mm Weight: 2.6500 kg Magazine Capacity: 50 Major Colour: Black
BRAND NEW 600 ROUNDS OF REMINGTON AMMUNITION UMC 40 S&W 180 GR FULL METAL JACKET (FMJ) AMMUNITION, 100 ROUNDS PER BOX, 6 BOXES PER CASE, 600 ROUNDS TOTAL. All UMC handgun ammunition is American-made in Lonoke, Arkansas, using first-quality, factory-fresh brass and clean-shooting Kleanbore primers to provide the best value for practice, personal defense and hunting. UMC handgun ammunition offers the choice of full metal jacket, soft point, and jacketed hollow point bullets in several popular handgun calibers. You'd be hard-pressed to find a better value anywhere. *STOCK PHOTOS OF ITEMS ARE GENERALLY ACCURATE 99% OF THE TIME, PLEASE MESSAGE US FOR DETAILS IF YOU ARE NEEDING ADDITIONAL PHOTOS OR INFORMATION, THANK YOU!* Specifications Brand Remington Ammunition Category Centerfire Handgun Rounds Caliber 40 S&W Model UMC Bullet Weight 180 gr Rounds Per Box 100 Casing Material Brass Application Plinking Boxes Per Case 6 Bullet Type Full Metal Jacket (FMJ) Muzzle Energy 392 ft lbs Muzzle Velocity 990 fps Similar Items A40 Search Code RPST
AR-15 pistol is a classification that exists due to some silly American gun laws and definitions. An AR pistol cannot have a stock, but can have a bare and exposed buffer tube. Another no-no is a vertical grip, but an angled grip like the Magpul AFG is legal. Now of course nobody wants to run afoul of the Federal Government, so it’s imperative that you understand what makes an SBR an SBR, and what makes AR pistols legal. It may appear to be complicated and obfuscated but the defining characteristics are pretty straight forward if you know what you’re looking for. AR-15 pistols can have barrels as short as you want them to. Personally, I own an AR-15 pistol with a 7.5-inch barrel and, while it is ridiculous, it’s a lot of fun. Over the last few years, the popularity of AR-15 pistols has grown significantly. This growth is mostly tied to the advent of stabilizing braces. Stabilizing braces turned a gaudy, heavy, and awkward gun into a stable, comfortable-to-shoot weapon. Why Would I Want One? We won’t dive too deep into the NFA, but the section that concerns this article is the law that rifles must have 16-inch barrels, or else they are regulated under the NFA. So, if you wanted an AR-15 with a 7.5-inch barrel, you’d have to pay a tax stamp, ask for permission, and wait for 3 to 6 months for approval. Once approved you could then own an SBR. Or you could just buy an AR pistol and skip all that. There are a lot of other reasons you might want an AR pistol, besides just the tax stamp.
Specifications Brand: UK Arms Operation: Single Shot Pump Action Springer Construction: Polymer Muzzle Velocity: 280 to 300 FPS Magazine Capacity: 30 Rounds Product Weight: 1.75 lbs Product Length: 28 inches Color: Black Red Dot Sight, Flashlight, and Stock included Features Highly durable polymer construction The UK Arms airsoft pump action shotgun is easy to operate and reliable as there is no gas or batteries required Comes with a detachable red dot sight and a flashlight If you're looking for a fun, reliable airsoft gun that looks and performs great, look no further Integrated forward grip makes cocking your shotgun a breeze
Adjustable objective allows for parallax correction and rangefinding Magnification: 3x - 9x Length: 31.4 cm Weight: 16.5 oz. Object diameter: 50 mm Eye relief: 6.7 ~ 9.9 cm Exit pupil: 16.67 ~ 5.56 mm Field of view: 13.4 ~ 40.38 (@ 100 yds.) Fast focus eyepiece Includes 25mm scope rings for rail attachment
American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished. Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.
Valken prides itself on producing high performance airsoft guns with long range accuracy, and creating extremely accurate replicas of models held in high regards by military and law enforcement. The MOD-M rifle by Valken is the newest AEG in the ASL series and is no exception when it comes to top of the line quality, built with next level internals and top quality externals. This rifle is the perfect choice for those looking for a high grade CQB weapon or long range rifle. Utilize the four sided 16” inch nylon fiber top MLOK rail, offering more than 30” inches of rail space, to accessorize the Valken with a wide variety of optic options, or attach a tactical flashlight, laser, or vertical grip to the bottom MLOK rail underneath the handguard. The Billet style receiver and functioning bolt catch add a level of realism to the Valken MOD-M. Ambidextrous magazine release and fire selector ensure any player, despite being left or right handed, can operate this rifle with no limitations. The 6 position adjustable Crane stock allows for easy alteration of overall length for players of all sizes to operate this rifle comfortably, and makes it quick and easy to adapt from CQB to long range engagements. The flip-up High Visibility front and rear iron sights are perfect for zeroing in your targets on the spot, or can be flipped down to make room for your choice of optic accessory. The full metal Version 2 Gearbox features an upgraded torque motor for peak performance, and 6mm bearing & bushing combination to ensure smooth and reliable gear change and requires less maintenance due to heavily decreased levels of wear and tear. This rifle is also outfitted with low resistance wiring to protect trigger contacts and reduce shortages power loss. By combining a rugged metal build with the power and accuracy needed to out-gun the competition, Valken has created an AEG that will surely resonate with players of all skill levels and play styles. Features: Color: Black 380 FPS (0.20g BB) Magazine: 300rds Inner Barrel: 300mm 6.05mm Anodized Inner Barrel 9.6v Nunchuck Battery (NOT INCLUDED) Billet Style Nylon Fiber Receiver Full Length MLOK Rail 20” inch Outer Barrel Four Sided Rail System Over 30” Inches of Rail Space Adjustable Iron Sights Ambidextrous Mag Release and Fire Selector Functioning Bolt Catch Adjustable Crane Stock Upgraded Torque Motor Full Metal Version 2 Gearbox Low Resistance Wiring Anti-Reversal Latch Access Safe/Semi/Full Auto Note: Battery and Charger sold separately.
FN 10700017 High Performance 5.7x28mm 40 gr Hornady V-Max (VMX) 50 PER BOX, 10 BOXES TOTAL NO CC FEES! QUICK SHIPPING! BRAND NEW 500 ROUNDS OF FN HIGH PERFORMANCE 5.7X28MM 40GR HORNADY V-MAX (VMX) AMMUNITION. 50 ROUNDS PER BOX, 10 BOXES, 500 ROUNDS TOTAL. This FN load features a Hornady V-Max bullet with 40 grain weight. *STOCK PHOTOS OF ITEMS ARE GENERALLY ACCURATE 99% OF THE TIME, PLEASE MESSAGE US FOR DETAILS IF YOU ARE NEEDING ADDITIONAL PHOTOS OR INFORMATION, THANK YOU!* Specifications Brand FN Category Centerfire Handgun Rounds Caliber 5.7x28mm Model High Performance Rounds Per Box 50 Casing Material Brass Bullet Type Hornady V-Max (VMX) Bullet Weight 40 gr
The full-sized MP5 SMG from Heckler & Koch is already quite portable, but some special forces units wanted an even smaller weapon. Thus, the MP5K was born, a concealable weapon that can pour rapid fire immediately. Umarex’s airsoft replica is entirely accurate, though the caliber markings are obviously different to denote its airsoft status. Otherwise, the weapon is identical to the original, aside from an orange tip. It has an aluminum upper receiver and barrel assembly, while the lower receiver is a polymer. It’s a very light PDW and can be shot one-handed. The pistol grip is necessary for such a weapon since rapid fire must be controlled to prevent wasting ammunition. While it comes without a shoulder stock, the MP5K can accept any H&K MP5 stocks. The iron sights are permanently mounted on the gun. However, there’s a bracket for a short length of Picatinny rail. Umarex includes a Ver 3 Full Metal gearbox for the best performance, and it’s entirely upgradeable if you want more out of this weapon. The adjustable hop-up lets you alter BB flight paths as well. Specifications: 280-310 FPS with 0.20g BBs 200 rounds in the magazine AEG Officially licensed by Heckler & Koch Adjustable hop-up Two stocks included 9.6V Small Stick battery and charger not included Semi-auto, full-auto, and safe modes Note: Battery & Charger DOES NOT come with purchase of rifle (9.6V Small Stick battery Battery Recommended)
Manufacturer: Springfield Armory Model: Hellcat Micro-Compact Series: Micro-Compact OSP Manufacturer Part #: HC9319SOSP UPC: 706397934682 Caliber/Gauge: 9MM Condition: Factory New Additional Product Information: Action: Semi Auto Capacity (Std): 13 Barrel Length: 3" Total Length: Weight (oz).: General Finish: Frame Size: Frame: Polymer Black Grip: Polymer Safety: Sights Front: Sights Rear: Magazine Count: 1 11 rd & 1 13 rd
* Freshly loaded 1000 rounds of Premium Quality .223 ammo * We use Premium components in the production of this fine round....Hornady 55gr V-max Bullets, Hodgdon powder & Armscor USA Brass. This assures you a top quality round that will perform in your rifle shot after shot.
The Umarex Elite Force Glock 17 is a phenomenal addition to Airsoft skirmishes. The gun jumps out of the box with a classic design. Far from subtle with the symbols, the Glock trademarks are molded into the pistol’s frame and etched onto the slide. The external components are a major reason why Airsoft players will adore this weapon. The frame is made of high-density polymer, whereas the slide is reinforced with aluminum alloy – both of which add to the gun’s outstanding durability. Additionally, the Glock 17 features an ergonomically textured grip to ensure better handling, allowing you to keep the gun steady while firing and to get a better feel. Plus, the pistol is more versatile than its predecessors owing to the removal of finger grooves. There’s also the conveniently designed slide that lets you handle the weapon more comfortably. In particular, the slide is serrated and makes for effortless racking of the gun, which can save time on the battlefield. You also get to use a tough full-metal framed magazine with a decent capacity of up to 23 rounds. The magazine’s push-button release system is convenient and allows the shooter to reload quickly. The pistol lets you make lots of modifications to enhance your shooting experience. The under-rail can hold various tactical accessories, such as lasers and flashlights. You can also adjust the hop-up system to decrease or increase your BB spin. Last but not least, there’s the streamlined trigger safety designed to prevent misfires, and the gas blowback operation replicates realistic recoil. Features: Material - Metal Slide and Polymer Frame Operation – Gas Blowback Muzzle Velocity – 0.20g Ball Bearings at 325 FPS Length – eight inches Hop-Up: Adjustable Color: Black Magazine Capacity – 23 Rounds (Works with VFC and Umarex Glock Magazine)
The sawed-off shotgun is the weapon gangsters and assassins prefer, since it deals a terrifying amount of damage to anything in front of the barrel. This one from Golden Eagle is an airsoft replica powered by green gas. It might not look intimidating, but the spray of BBs it releases is sure to send enemies scurrying for cover. The tubular magazine contains shells that hold 30 rounds. With a switch, you can change from 3-round shots to 6-round shots. The setting depends on the situation, so you’ll need to experiment and find out what suits you. The furniture is made of wood and is comfortable to hold. The classic weapon aesthetic is also popular with cosplayers. Thanks to the metal receiver, barrel, and tube, the weight is quite realistic for an airsoft replica. The wood is also heavier than plastic and contributes to the 4 pounds. When using this shotgun, it’s best to fire only when enemies are near point-blank range. The short barrel makes long-range accuracy basically zero. That’s why you need to get up close and personal. Specifications: 260-300 FPS with 0.20g BBs 3 shells in the magazine 30 rounds in each shell Wooden furniture Pump action Powered by green gas Metal construction 4 pounds
300 Spartan Warrior Replica Sword - BK1388 This is an exact replica of the sword carried by the famed King Leonidas and his 300 Spartans at the Battle of Thermopylae. This massive sword measures 34 1/2" overall and breathes strength. The 26" heat-forged blade is heat tempered from solid carbon steel and is nearly 1/2" thick. The leather wrapped handle is contoured and surrounded by the distinctive extended guard and pommel. Forged steel blade is 1/2" thick Leather wrapped handle Distinctive blade shape & design Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.
This HFC pistol looks unique compared to various handgun designs, and you may wonder about its genuine firearm counterpart. Don’t be shocked. This airsoft pistol is an entirely original design from HFC, if inspired by the K&H USP and several other models. It’s a reliable sidearm you can rely on if your rifle’s magazine is empty. The gold aluminum slide is mounted onto a polymer frame, allowing the pistol to be light and durable. For easier cocking, the slide has two rows of serrations on the left and right sides. The safety and slide release are both located under the slide, near the rear, though they’re not ambidextrous. By default, this pistol doesn’t have any accessories, but you can attach a flashlight or laser to the Picatinny rail. It accepts most common alternatives, being a standard pistol rail. A secure grip is necessary for accuracy, and HFC designed this non-slip polymer pistol grip. It’s comfortable, whether you’re wearing a glove or not. The textures and ridges are especially effective in damp environments. Specifications: 280 FPS with 0.20g BBs 24 rounds in the magazine Adjustable hop-up Non-slip pistol grip Gas blowback
The Benelli Super Black Eagle 3 Shotgun is a full redesign of the venerable Super Black Eagle platform. With carefully considered insights from Benelli pro-staff and veteran hunters, Benelli design engineers spent nearly 10 years in development with a focus on three areas of critical importance to the serious waterfowler: Improved ergonomics, intuitive, flawless functionality and an updated design, style and feel for the latest in modern waterfowling reliability that’s all about the end game: Absolute superiority in the most unforgiving conditions. All the amazing attributes that made the Super Black Eagle 3 one of America's favorite shotguns is now also available for southpaws in a firearm specifically engineered for those who shoulder firearms on the left side. The Benelli Super Black Eagle 3 Shotgun is the semi-automatic shotgun capable of shooting, in addition to all traditional hunting loads,most steel shot loads. The Super Black Eagle 3 Shotgun also contains the innovative Comfortech System, Benelli’s exclusive full comfort system ensures excellent performance in term of reducing recoil and muzzle rise and making aiming quicker than ever. Especially for the new comb that minimizes muzzle climb and vibration. ComforTech was the first recoil-reduction system of its kind. By splitting the stock diagonally and utilizing shock-absorbing chevrons the entire stock was transformed into a recoil pad. The chevron size and location has been optimized on Comfort Tech 3. Further, Benelli engineers created a new cheek comb pad called Combtech, which greatly reduces facial impact and vibrations. When considering total recoil, vibrations, and impact to the face are often overlooked. Benelli realized that improvements could be made to the stock comb to reduce facial impact and developed the Combtech System. Combtech is simple but highly effective in reducing force transferred to the cheek area, resulting in a softer shooting gun that allows you to shoot better. Features Oversize bolt handle Inertia-driven Easy Load system Crio system technology Product Information Cartridge 12 Gauge Capacity 3+1 Round Weight 7 Pound Shell Length 3-1/2" Overall Length 49.6 Inches Barrel Length 28 Inches Hand Left Chokes Included Cyl, Imp Cyl, Mod, Imp Mod, Full Rib Ventilated Youth No Action Type Semi-Automatic Stock Type Field Stock Material Synthetic Stock Color Black Safety Crossbolt Sights Fiber Optic Front Barrel Finish Black Ported No Case Included Yes Frame Material Aluminum Interchangeable Choke Yes Frame Finish Black Length of Pull 14.375 Inches Choke Type Benelli Crio
Clad in OD Green and walnut – these shotguns stand out without being ostentatious. The muted green Cerakote finish makes them ideal for field work, increasing their hardiness and making them near impervious to the elements. The latest evolution in CZ's semi-automatic shotgun line, the 1012 uses a gas-less inertia operating system. Instead of redirecting gas from the barrel to run the action, the 1012 uses a spring within the bolt to store energy during the shotgun's recoil, spending this energy a split second later to rotate and unlock the twin lugs from the barrel extension and withdraw the spent shell. The major advantage of an inertia system is the less stringent maintenance schedule. Unlike gas guns that need periodic cleaning of the piston and magazine tube, the 1012's needs are vastly fewer. During CZ's testing, we pushed 1012s to 5,000 rounds without a drop of oil or cleaning of any sort, while experiencing zero parts breakage or malfunctions. In normal field use, the occasional cleaning and oiling should be more than enough Additionally, the gas-less system itself is tuned to run a wider variety of shells - from light-recoiling target loads up to the smoking hot 3" magnums currently on the market. Included shims allow the user to adjust the stock to personal preference. Equipped with sling swivels and extended chokes, these shotguns are ready to chase birds – from doves and ducks to turkeys and grouse! CZ-USA logo Product Information Cartridge 12 Gauge Capacity 4+1 Round Weight 6.5 Pound Shell Length 3" Overall Length 47 Inches Barrel Length 28 Inches Hand Right Chokes Included Cyl, Imp Cyl, Mod, Imp Mod, Full Rib Ventilated Youth No Action Type Semi-Automatic Stock Type Field Stock Material Wood Stock Color Walnut Safety Crossbolt Sights Bead Barrel Finish OD Green Ported No Case Included No Frame Material Steel Interchangeable Choke Yes Frame Finish OD Green Length of Pull 14.5 Inches
The original Scout rifles were manufactured by the Austrian Steyr Arms, but this realistic replica from ActionSportGames and Modify is perfect to bring the piece to airsoft matches. Video games like Counter-Strike popularized this weapon design, making it one of the most memorable pieces of the 20th century onwards. This re-creation brings the Scout rifle’s unique properties to airsoft fields. The rifle is made from CNC-machined aluminum and steel parts, with further nylon and polymer reinforcement and attachments. This gives the rifle a realistic feel and weight. The outside appearance is a true-to-life copy of the original rifle design, down to the spare magazine storage in the back of the stock. In order to behave like a sniper rifle, the Steyr Scout has flip-up front and rear sights, although most users will upgrade to custom sights on the Pic rail on the barrel. The rifle comes with a foldable bipod design near the front of the barrel to facilitate proper handling and positioning. The nylon polymer stock has an attachment point for bipod rails should users want a customized solution. Upgraded straight from the factory, this rifle can compete and outmatch most customized sniper rifle builds with minimal effort and add-ons. The factory upgrades include an upgraded M140 spring system, which can hold an M190 spring without any adjustments necessary. The rifle also has 60-degree Modify Predator hop-up bucking to make full use of the enhanced hop-up. The Scout’s exteriors were designed to absorb shocks, and the mechanism parts were created to be as silent as possible. Features: Length: 1m/39.4 inches Barrel length: 14.2 inches Weight: 6.5 lbs Color: black Magazine capacity: comes with a 32 BB stock magazine, fits a spare magazine FPS: 443-450 Recommended ammo: 0.36g BBs and above, 0.4g optimal Adjustable hop-up Type: spring.