+1 (702) 963 3706
Benelli R1 .300 Win Mag 20? Barrel and Bolt Assembly. Usually only found on custom-made rifles the R1’s barrel is cryogenically frozen to -300° F which changes the steel at the molecular level. The result, better barrel harmonics providing superior accuracy. Includes the barrel and bolt assembly Barrel is drilled and tapped for both iron sights and scope bases Caliber: .300 Win Mag Barrel Length: 20? Gloss Blued finish Manufacturer: Benelli ITEM INFO CATEGORY: Rifles TYPE: Semi-Automatic BRAND: Benelli MODEL: R1 CALIBER: 300 WSM TECH SPECS CAPACITY: 10 WEIGHT: 7 MATERIAL: Black/Wood SIGHT: Drilled and tapped. PURPOSE: Semi Auto Rifle
The Benelli M2 Field Rifled Slug Shotgun is the result of painstaking work at Benelli’s Research and Development Center and of Benelli’s extensive experience in precision engineering and technical know-how. The small number of components, an extremely simple operating principle, the innovativeness of the turning block bolt locking system and the cartridge feeding system (cut off), make the “Benelli” shotguns highly reliable and practical, easy to strip and upkeep to the extent that the shotguns can be considered the most modern, accurate, safe, fast and elegant shotguns available today. Benelli semi-automatic shotguns operate on the same basic principle of inertial operation with fixed barrel, utilizing the kinetic energy of gun recoil, which still today represents one of the most important and ingenious innovation of sporting weapon production. This system requires no outlet for gas operation nor barrel recoil, but operates by means of a spring freely interposed between locking head and bolt. As the gun recoils during firing, the breech bolt (inert) moves about 4 mm forward, thus compressing the spring. When this is fully compressed, it overcomes breech bolt inertia, thrusting it to the rear under residual pressure, permitting cartridge case extraction and reloading with the conventional system. Spring pressure is designed to delay the opening of the action, which occurs after the shot has left the barrel, and to compensate for the different pressures produced by cartridges of varying power, with no adjustment necessary. The fully automatic operation of this new shotgun eliminates the drawbacks of the barrel recoil system (barrel vibrations during firing needed to brake the system and regulate it when firing powerful ammunition etc.) and those of gas operated type (the need to clean gas outlets, loss of power due to acceleration of the shot charge and adverse effect on the longitudinal shape of the wad and possible malfunctions under adverse climatic conditions). The Benelli system is therefore modern and highly reliable. To this operating system has been added a revolving bolt head of simple and robust shape, which with only two locking lugs, closes the breech axially and perfectly, withstanding any pressure of the cartridge. The modern and revolutionary trigger action is carried out through a system of variable profile which allows the user to shoot precisely and without jerking in trigger pull. The pull action is carried out in a smoothly and controlled way, without trigger free pre-run or sudden relax after releasing the hammer, thus ensuring efficacy and safety of the whole system. Finally, the precise synchronization of the movement of the hammer double coupling teeth optimize the feeding system through a combined action with the cartridge drop lever and the stop notch. The cut-off feeding system operates by means of a special “cartridge drop lever”, the outer portion of which protrudes below the receiver and is thus easily reached by the trigger finger. Upon shooting, the hammer spring forces the cartridge drop lever upwards to disengage it from the carrier latch which, pulled by the carrier latch spring, rotates clockwise to allow a cartridge to exit from the magazine. As the cartridge falls into position on the carrier, it presses against the “cartridge drop lever” which rotates in the opposite direction to prevent a second cartridge from exiting. When the bolt is operated the carrier rises automatically to position the cartridge for introduction in the chamber. In the meantime, the hammer spring, which was compressed during cocking, has freed the cartridge drop lever to return to its rest position. In this way, the carrier latch holds the remaining cartridges in the magazine until the next shot is fired. The end of the cartridge drop lever which protrudes from the receiver is marked with a red point. When the red point is visible, the hammer is cocked and the gun is ready to fire; otherwise the hammer is not cocked. Thanks to this operation cartridges in the barrel chamber can be easily replaced manually. Product Information Cartridge 20 Gauge Capacity 3+1 Round Weight 6.5 Pound Shell Length 3" Overall Length 45.3 Inches Barrel Length 24 Inches Hand Right Youth No Action Type Semi-Automatic Stock Type Field Stock Material Synthetic Stock Color Black Safety Crossbolt Sights Rifle Sights Barrel Finish Black Ported No Frame Material Aluminum Interchangeable Choke No Frame Finish Anodized Black Length of Pull 14.375 Inches Country of Origin Italy Choke Type Fixed
The legendary FN SCAR® 20S is upgraded with Non-Reciprocating Charging Handles. Perfectly calibrated for long-range fire, the FN SCAR 20S delivers surgical precision, with an enhanced set of controls to enable any shooting position or optic choice. The rugged, monolithic upper receiver with full-length MIL-STD-1913 rail provides more space for rail-mounted accessories, and a precision buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 20S is the benchmark for long-range precision from a gas-driven piston platform, delivering a highly accurate and proven design for target shooting and law enforcement applications. Product follows USA specifications CALIBER: 6.5 Creedmoor or 7.62×51 mm OPERATION: Short-stroke gas piston MAG CAPACITY: 10 Rd. BARREL LENGTH: 20? OVERALL LENGTH: 41”-42.8” WEIGHT: 11.6 lbs. PRIMARY FEATURES New bolt carrier assembly with NRCH enables any shooting position or optic choice, reduces felt recoil Extended monolithic receiver Short-stroke gas piston RECEIVER Hard-anodized monolithic aluminum MIL-STD-1913 accessory rails at 3, 6, 9, and 12 o’clock positions BARREL Cold hammer-forged, chrome-lined, free-floating heavy contour barrel TRIGGER Two-Stage Match trigger (Geissele® “Super SCAR”) STOCK Precision adjustable for LOP and comb height Adjustable cheekpiece Hogue® rubber grip with finger grooves OPERATING CONTROLS Dual, ambidextrous charging handles remain static under fire, user swappable left/right Ambidextrous safety lever and magazine release Enlarged trigger guard for easier access when wearing gloves Composite polymer trigger module MAGAZINE Uses FN SCAR® 17S magazines Steel magazine body Low-friction follower
Outfit your sniper rifle with one of the most rugged rifle scopes available on the market today. This next-level rifle scope is constructed from a hard anodized aluminum alloy body to prevent damage done by shock or debris. The multi-coated lenses provide exceptional clarity, and the entirety of this scope is nitrogen purged and o-ring sealed to fight fog and moisture build-up. Both green and blue reticle colors are offered in multiple power levels, for the most visible reticle during all times of day. A single CR2032 battery powers this scope, which is included. A locking adjustable parallax knob and locking target turrets keeps this scope perfectly sighted in for per your preferences. G&G pulled all stops to produce a long lasting and versatile scope option perfect for your next mission as sniper. Features: Compatibility: Rifle Scope Mount Color: Black Magnification: 1.1-4X24 Anodized Aluminum Alloy Construction Multi-Coated Lenses 1x CR2032 Battery Included Nitrogen Purged & O-Ring Sealed Glass Etched MIL-DOT Reticle Variable Blue / Green Illuminated Reticle Locking Adjustable Parallax Knob & Target Turrets 45° Offset Rheostat Lens Covers Included
200 rds 4 box's of 50 PMC Bronze 380 Auto Ammo 90 Grain Full Metal Jacket. Ammo review offers the following information; This target 380auto ammo load features a 90 grain full metal jacket that is lead core and non magnetic. No other manufacturer can assure greater uniformity and reliability than PMC! PMC Bronze 380auto must pass through a laborious inspection of PMC's "Electronic Powder Check Station", this station accurately measures the propellant charge in each round. If the propellant in any of the rounds varies even slightly (just 2/10 of one grain), the entire system will stop and that round gets rejected. Additionally the Full Metal Jacket rounds are developed with a lead core bullet, enclosed in a heavy copper topcoat, subsequently having little to no expansion and a more profound penetration of the bullet. 380auto ammo by PMC Bronze is new production and non-corrosive, featuring boxer primers and brass casing. PMC Bronze is reloadable for those high volume shooters who love to reload their 380auto ammo. This 380auto is packaged in boxes of 50 and cases of 1000. This is factory fresh ammo. Buyer is responsible for knowing if they are eligible to purchase this ammunition based upon their location/age restrictions. Buyer assumes all liability for ammunition and agrees to not misuse it in any manner. Must be 21 years or older to purchase.
The Benjamin® Marauder® .22 PCP Air Rifle (pre-charged pneumatic) is powered by high-pressure air (HPA) stored in a reservoir within the gun. With PCP airguns there is no need to pump the gun after every shot; the user can continue shooting until the reservoir needs to be refilled (refilling accessories sold separately). A gauge embedded in the rifle's forearm tracks pressure. A 10-round, revolving magazine provides fast shooting and reloading. The Marauder Air Rifle propels a .22 caliber lead pellet up to 1000 fps, making it a capable option for pest control and varmint hunting. A 2-stage, adjustable, match-grade trigger system allows the kind of precise shooting needed for hitting small varmints and pests, and an internal shroud makes this PCP Air Rifle very quiet. The Benjamin Marauder .22 PCP Air Rifle comes with a rifled steel barrel, and a wood stock with an adjustable comb. The rifle's steel receiver has a dovetail rail for mounting optical sights. Weight: 8.2 lbs. Made in USA. Manufacturer model #: BP2264W. Powered by high-pressure air 10-round detachable magazine No need to pump the gun after every shot Propels a .22 caliber lead pellet up to 1000 fps Receiver rail for mounting optical sights Wood stock with adjustable comb Rifled steel barrel 32 FPE 3000 psi
The fast-handling and quick-shooting FN SCAR® 16S is upgraded with Non-Reciprocating Charging Handles. The new, dual charging handles enable any shooting position, grip style or optic choice, ensuring any braced or barrier-contact position shoots flawlessly. A rugged, monolithic upper receiver with MIL-STD-1913 rail provides space for rail-mounted accessories, and a folding buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 16S in 5.56x45mm is the benchmark for reliability and versatility from a light recoiling, piston-driven platform. All current 16S SCARs are Belgium made, there are those that were VA or SC assembled. However, FN might be no longer importing the 16S and resort to US made only. 98521-2 FN SCAR® 16S NRCH 5.56x45mm Blk 16-in 30-Rnd 845737013622 98621-2 FN SCAR® 16S NRCH 5.56x45mm Blk 16-in 10-Rnd 845737013639 98501-2 FN SCAR® 16S NRCH 5.56x45mm FDE 16-in 30-Rnd 845737013561 98601-2 FN SCAR® 16S NRCH 5.56x45mm FDE 16-in 10-Rnd 845737013615
Estate Buckshot 9 Pellets Estate 9 Pellet 00 Buckshot Muzzle Velocity 1235fps 25 Round visit Ammo and Reloading Shop to buy Estate Buckshot 9 Pellets 12 Gauge from the Federal Estate line features a 00 Buckshot 9 pellet round. This ammo can be used in both semi-auto shotguns and pump action shotguns. Estate 12 Gauge is a versatile round and can be used either for protection purposes or taken on a hunting trip. This is an all purpose buckshot ammo that offers the same specs as Federal Premium rounds but at a more affordable price for high volume shooters. With Federal Estate 12 Gauge ammo there is no need to sacrifice quality and dependability for a value price. This round measures 2 ¾” in length and is capable of hitting impressively tight pattern shots with the 9 pellet 00 Buckshot bullet. This versatile round from Federal features high quality components like all of Federal’s products and it is guaranteed to perform well at the range, in the field, or in self defense situations no matter the environment.Estate 12 Gauge 00 Buckshot ammo has a muzzle velocity of 1325 fps Box of 25 Rounds You must be 21 years or older to order ammunition. Ammunition must ship UPS ground. Due to safety considerations and legal/regulatory reasons, Ammunition may not be returned. Please check local laws before ordering. By ordering this Ammunition, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements to purchase this Ammunition.
semi auto Short barreled rifle Zenith/MKE Z-5P in 9mm. This contains 6 USA made parts for 922r compliance. The Zenith is an HK LICENSED VARIANT of the famous HK 9MM machinegun and is a double push pin. This gun can take any and all Genuine H&K factory parts. Parts are 100% interchangeable without modification.Parts like mags stocks internals Etc. We have a Full auto converted unit in our shop and have put over 1500 rounds through it without a single jam or malfunction, 100% reliability is what you can expect......................................................... MKE supplies 29 countries with Everything from Ammunition and Small Arms to Tanks. These guns are top Quality Firearms from the MKE Turkish Military Plant. This come with a threaded 1/2x28 tri-lug barrel. 3-30 round mags and side folding stock plus foregrip. So if you always wanted an MP5-K this is the one for you. This is made on Licensed H&K factory machinery to H&K Specs. The finish is exact H&K factory spec. HENSE IT IS AS CLOSE AS H&K AS YOU CAN GET!!!!!!!! We guarantee this to be free from defects for 5 years. Buy with confidence.
Adjustable objective allows for parallax correction and rangefinding Magnification: 3x - 9x Length: 31.5 cm Weight: 26 oz. Object diameter: 40 mm Eye relief: 6.91 ~ 8.5 cm Exit pupil: 13.3 ~ 4.4 mm Field of view: 13.4 ~ 40.38 (@ 100 yds.) Fast focus eyepiece Includes 25mm scope rings for rail attachment
This Chester County Armory listing is for a rarely seen P.A.W.S. Inc. Model ZX-7 .45acp transferable sub machine gun. Also known as "The American Sterling", this rare and uniquely US-made ZX-7 serves as a fascinating homage to the venerable British Sterling L2A3 sub machine gun. Always enamored with the craftsmanship and design of the British Sterling, the ZX-7 was built and created by gunsmith and Class 2 manufacturer Bob Imel at his company, Police Automatic Weapons Services, in Salem, OR in the mid 1970's. Built from the ground up, Mr. Imel re-created the beautiful lines and wonderful reliability of the L2A3, but with his own unique redesigns and improvements, to make it a truly Americanized version. Of course, the improvements started first and foremost, by offering it in the American of all American calibers...the .45ACP. For an in-depth analysis of the differences between the British Sterling L2A3 and Bob Imel's creation, check out Ian at Forgotten Weapons and his wonderful video on the subject: https://www.youtube.com/watch?v=VKk9Ss6RJ80 Utilizing easy-to-come-by M3 Grease gun magazines, the ZX-7 functions amazingly well, with a cyclic rate of around 750 RPMS, making it markedly faster than the M3 Grease Gun and more inline with a 1928 Thompson. Robust and controllable, the ZX-7 in .45acp was only made in very small numbers by P.A.W.S. as a transferable SMG. Some counts have them as low as 20 or 25, as the 9mm version (the P.A.W.S. ZX-5), was made in significantly greater quantities. This specific model is serial number 20. This transferable sub machine gun is in excellent mechanical, as well as cosmetic condition. The internals do not note any wear and the bore is bright and shiny with crisp and clean rifling. The fire controls are in excellent condition, with solid placements on the selector controls in both semi-automatic and full-automatic modes, as well as a positive safety lockup. The original crinkle-style finish employed by Mr. Imel is in excellent condition, with only a few minor marks on the entire weapon. The metalwork is excellent, with no dings, dents, gouges, cracks, etc.. Two 30rd magazines are included with the purchase. This rare and unique weapon is currently on a Form 3 for easy transfer, with "P.A.W.S. Inc" listed as the manufacturer and "ZX7" listed as the model. FOR MORE INFORMATION ON THIS LISTING CONTACT OUR WEBSITE AT OUTDOORSARMORY.COM
1918A2, BAR Manufactured by NE Small Arms in Very Nice Condition 524402 Please note: This is a restricted Pre-May Sales Sample only available to FFL & SOT Dealers. In stock in our vault and ready for eForm transfer. Price includes S&H and Insurance. Florida residents are subject to Florida Sales tax.
We take pride in the quality and originality of our products
Our products reach our clients in a timely and discreet manner
We provide support for all customers at all times
If there are any defects upon arrival, do return the weapon and be refunded in full.
In light of recent global events, more people than ever are considering arming themselves for self-defense. From 2011 to 2013, the CDC reports that over 3,380 Americans died from terrorists attacks on U.S. soil. Do you want to get a guns? Buy a gun now...
© 2019 OUTDOORS ARMORY, All Right Reserved
