35 in Fantasy Sword PK2460-355 - Fantasy Swords

35 in Fantasy Sword PK2460-355 Fantasy Sword & Chain, All metal construction Overall Length: 35 , Shaft is 1 diameter polished stainless steel Handle Width 8-3/4 Blade width 4, Blade is not sharp Chain is approximately 24 long Handle Rotates on shaft and has foam grip Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.

As the rival of Saizo and head of Sanada's ninja squad, Sasuke uses this Brave Ninja Sarutobi Spiked Knife while being a proud Koga warrior against the Ten. Sasuke Sarutobis loyalty towards Yukimura is strong and unwavering, and he will not forgive anyone who soils Sanada's name. He hates Iga Ninja, most notably Saizo Kirigakure. At the same time he acknowledges Saizo as a strong ninja and trusts him. His main weapons are two knives. Our Brave Ninja Sarutobi Spiked Knife is just like Sasukes with its spiked knuckle over a nylon wrapped oval handle. The large unsharpened blade comes down in a slight curve with silver waves down its spine. Grab your Brave Ninja Sarutobi Spiked Knife and join the ninja squad. Overall Length: 20.5 Inches Blade Length: 12.25 Inches Blade Thickness: 4mm, Tapered Blade Material: Carbon Steel, Oiled for Preservation Blade Finish: Satin and Black Finish Handle Length (inside): 4.75 Inches Handle Materials: Steel Nylon Wrapped

American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished.

American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished. Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.

This is one solid wooden construction sword from top to bottom. The cross-guard is a stylized cat's head, with two triangles on the top half curving into ear-points and the bottom half tapering down into a single point. The blade is made from wood, painted in silver followed by the wooden handle wrapped with nylon cord. The scabbard is all wood with a black high gloss lacquer finish with a brown bull horn knot. This sword is perfect for cosplay, conventions or just plain pretending. Specifications: Overall Length: 39.5" Blade Length: 27" Handle Length: 10"

Arabian Sands Sabre Sword & Sheath - BK1335 This Arabian Sands Sabre Sword is unlike any sword in your collection! Get yours today! Features: Extra wide 13" heat tempered 440 stainless steel blade Solid wood grip Heavy brass guard and pommel Includes leather sheath 17 3/4" overall Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.

These guards are made out of steel and come with a beautiful wooden display gift box with a red silk layer inside. The box is made from wood and has a black imprint of the guard outside on the cover. This item is a perfect gift for all serious sword collectors.

 38.5" OVERALL RED SAMURAI SWORD WITH ATTACHED THROWING KNIFE    Samurai Sword 38.5" OVERALL 28" 4MM BLADE, STAINLESS STEEL SATIN FINISHED BLADE 9.5" RED CORD WRAPPED HANDLE THROWING KNIFE ATTACHED TO SCABBARD INCLUDES BLACK ALUMINUM SCABBARD & ZINC ALLOY TSUBA

This sword is only for those that fight for Valhalla. With a 24 inch blade forged from Damascus steel, you can definitely say that this is no run-of-the-mill Lang Saex sword. This high-quality 1095/15N20 Damascus has been between 400-520 layers, and has a Rockwell rating of 58-60 HRC. Because of the unique shape of this single edged sword, it can primarily be used as a stabbing weapon, but is just as effective at slashing. The full tang runs in the centerline of the blade, and inserted into a Durable sheesham wood handle that is stained a rich mahogany brown. The guard and pommel are both made of pure brass, with traditional Norse inscriptions etched into them. The included genuine black leather sheath comes with beautiful gold Viking inscriptions as well, including that of a serpent, and is meant to be worn over the shoulder. Overall Length: 32 inches, Blade Length: 24 inches

The blade is the first thing you will notice with the chaotic ocean current patterns that are just exquisite. It is constructed from premium quality Damascus that is made from 1095/15n20 alloy steel. The Rockwell rating is 58-60 with 176 true blade layers. The blade tapers towards the tip with parallel edges that come sharp. The cross guard is made from steel with an etching of an Odins eye weave. Odins eye is a symbol of perception and worldly understanding; in other words wisdom. The grip is just as eye catching as the blade as it is made from high quality materials like hand carved bone and stained wood with brass spacers. The triple lobe pommel is attributed to the Anglo Saxons. The center lobe being quite bulbous compared to the two outside lobes. Similar etching is on the pommel matches the cross guard. Included is a sheath with a back strap that is made from premium leather that has been hand sewn. This blade was made for nothing more than battle. Overall Length: 32.25 Inches.

1045 Carbon Steel  Blood Groove Samurai Katana     SpecificationsOverall Length: 40.25 InchesBlade Length: 27.75 InchesBlade Material: 1045 Carbon SteelBlade Thickness: 7mmTang: Full Length Steel TangSharpness & Functionality: Sharp, 8.5/10, Battle ReadyTsuba: Solid Steel, Black Oxide FinishHandle Length: 10.75 InchesHandle: Solid Hardwood, White Faux Rayskin, Black Ito WrapSaya: Hardwood, Black  FinishIncludes: Katana Sword Bag

Yo, ho ho! What better way to show off your swash-buckling pirate attire than adding the finishing touch that is a ravishing sword belt? The belt is handmade from brown leather, adorned with circular brass studs and 3 signature skull and cross bone studs, with a large square buckle to hold the belt in place. Though this belt is made for a smaller cutlass sword, the sword frog attached to the belt has two adjustable straps with pure brass buckles to fit swords of various shapes and sizes.