37" MANUAL STICK SHIFT SWORD CANE

37" MANUAL STICK SHIFT SWORD CANE

Item ID:

28024458

UPC:

2914729429

$34$40

Availability - In Stock

PRODUCT INFO

Category:

Knives & swords

Type:

sword

Brand:

37" MANUAL STICK SHIFT SWORD CANE

Model:

37" MANUAL STICK SHIFT SWORD CANE

Caliber:

3

TECHNICAL SPECS

Capacity:

1

Weight:

3

Material:

steel

Sight:

fixed

Purpose:

weapon

37" MANUAL STICK SHIFT SWORD CANE. 37" OVERALL LENGTH BROWN MANUAL STICK SHIFT AS HANDLE 12" 440 STAINLESS STEEL SWORD BLADE INSIDE

Write a review




37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle. In the 18th century the cane replaced the sword as an essential part of a gentleman's attire. While the cane was used as a walking stick it could also be used as a sword, or contain hidden compartments for alcohol or a firearm. The great men of the last two centuries have carried canes, from Sherlock Holmes, to Gregory House and of course Scrooge McDuck. Every Gentleman Requires a Cane. This cane is not a substitute for a medical walking device. The cane shaft has been constructed from steel with a black glossy finish. Hidden inside of the black metal shaft is a 12” hidden blade made of stainless steel, which can be accessed by unscrewing the handle. The bottom of the cane features a tough rubber gripper. The head of the cane has been constructed from steel with Rolling Evil Eye With Skeletal Hand Handle. Cane Overall Length: 37" Blade Length: 12" Handle Length: 4" Handle Width: 2" Cane Shaft Material: Steel Cane Head Material: Steel



1045 Carbon Steel  Blood Groove Samurai Katana     SpecificationsOverall Length: 40.25 InchesBlade Length: 27.75 InchesBlade Material: 1045 Carbon SteelBlade Thickness: 7mmTang: Full Length Steel TangSharpness & Functionality: Sharp, 8.5/10, Battle ReadyTsuba: Solid Steel, Black Oxide FinishHandle Length: 10.75 InchesHandle: Solid Hardwood, White Faux Rayskin, Black Ito WrapSaya: Hardwood, Black  FinishIncludes: Katana Sword Bag



American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished.



300 Spartan Warrior Replica Sword - BK1388 This is an exact replica of the sword carried by the famed King Leonidas and his 300 Spartans at the Battle of Thermopylae. This massive sword measures 34 1/2" overall and breathes strength. The 26" heat-forged blade is heat tempered from solid carbon steel and is nearly 1/2" thick. The leather wrapped handle is contoured and surrounded by the distinctive extended guard and pommel. Forged steel blade is 1/2" thick Leather wrapped handle Distinctive blade shape & design Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



20” FIXED BLADE FANTASY SWORDSKULL SCREAMER 20” OVERALL LENGTH 13” STAINLESS STEEL BLADE 7” LEATHER WRAPPED HANDLE INCLUDES NYLON SHEATH



This futuristic piece is equipped with a 9 3/4" fantasy blade constructed from stainless steel. The ABS impact resistant handle features cast aluminum accents with antique silver finish. An added feature is the small dagger which easily removes at the push of a button. An out of this world experience. 20 1/2" overall



1840 CSA/NCO Confederate Non-Commisioned Officer Short Sword with Steel scabbard 1840 United States Army NCO Sword with Steel scabbard. 1840 United States Army NCO Sword with Steel scabbard The United States Army Non-Commissioned Officer sword was adopted by the War Department in 1840. The Army Noncommissioned Officer Sword has been worn by Army sergeants for over 100 years. It is primarily used today for honor guards and presentations such as PCS and change of command. Our swords have been purchased by the Army NCOA ( Non Commissioned Officers Academy) as well as National Guard and US Army military bases around the world. Specifications Overall Length: 37 Inches Blade Length: 31.5 Inches Blade Material: Steel Handle Material: Brass Scabbard: Metal Replica of the Model 1840 United States Army NCO Sword



The bandit of Sherwood Forest, Robin of Locksley, is fabled to have stolen from the rich to help the poor. The legendary outlaw and his band of followers engaged in countless mischievous adventures that frustrated the evil Sheriff of Nottingham. Leather sheath is included with the purchase of this high quality sword.



Medieval Sword Metallic Chrome Blade Spark Foam Irish Ring SPARKFOAM SWORD   Features of Spark Foam: 1. High Density Durable "EVA Foam" 2. Special Coating that will NOT wrinkle easily 3. Painting will NOT go off easily 4. Durable Fiberglass inner core inside, battle ready without cracking the sword   Specification Overall Length: 40" 32" Metallic Chrome Blade Handle Length; 8 " Straight Handguard with Black Handle & Circular Pommel All made of FOAM w/ inner core



Arabian Sands Sabre Sword & Sheath - BK1335 This Arabian Sands Sabre Sword is unlike any sword in your collection! Get yours today! Features: Extra wide 13" heat tempered 440 stainless steel blade Solid wood grip Heavy brass guard and pommel Includes leather sheath 17 3/4" overall Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



Gil Hibben, famous for his unique knife and blade designs, custom crafted this knife especially for United Cutlery in 1991 as the second in his annual Fantasy Series offerings. Mirror polished 420 stainless steel blade split into two sections Gil's personal stamp etched on the blade Silver wire-wrapped hilt Genuine leather sheath 5 1/2" blade length 11 1/4" overall length



3 PIECE SAMURAI SWORD SET 3 Piece Samurai Sword Set 3Pcs Black Samurai Sword Set Carbon Steel Blade Japanese Inscriptions Black Wood Scabbard Includes Wood Display Stand You must be at least 18 years old to purchase products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local, state and federal laws is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



RELATED WEAPONS

Other Product details

Triple Ninja Sword Set includes 3 blades: a 26" sword, a short sword that is dagger-sized at 17.75", a knife blade that measures about 12.25", and a nylon sheath that holds all three blades featuring an adjustable shoulder strap. Each blade is sharpened on both edges and heat treated to just the right hardness. The finish is known as titanium and is iridescent or multi-colored, like oil on water in the sunlight. All of the blades in this Triple Ninja Sword Set have weight reducing cutouts and nylon cord wrapped handle grips. Specifications Sword Overall Length: 26 Inches Sword Blade Length: 17.25 Inches Blade Material: 440A Stainless Steel Sword Blade Thickness: 3mm Tang: Full Tang, Seamless w Blade Sharpness & Functionality: Very Sharp, Solid 3mm Thick, Full Tang Blade Features: Double Edged, Weight Reducing Mid-Length Cutouts Sword Handle Length: 7.5 Inches, 6.5" Grip Handle: Steel Tang, Wrapped w Black Nylon Cord Other Features: Mini Sword Guard Dagger Overall Length: 17.75 Inches Dagger Blade Length: 11 Inches Dagger Handle Length: 5.85 Inches Knife Overall Length: 12.25 Inches Knife Blade Length: 6.75 Inches Knife Handle Length: 4.5 Inches Sheath: Free Nylon Sheath, Adjustable Shoulder Strap, Inner Stiff Liner Blade Finish: Multi-Colored, Titanium Finish, Heat Treated Includes: Sword, Knife, Dagger-sized Sword, Nylon Sheath w Shoulder Strap



Yo, ho ho! What better way to show off your swash-buckling pirate attire than adding the finishing touch that is a ravishing sword belt? The belt is handmade from brown leather, adorned with circular brass studs and 3 signature skull and cross bone studs, with a large square buckle to hold the belt in place. Though this belt is made for a smaller cutlass sword, the sword frog attached to the belt has two adjustable straps with pure brass buckles to fit swords of various shapes and sizes.



. The DAGGER style knife is 8.25 inches OVERALL with 4 inch DAGGER BLADE signed on bolster side by the knife maker, and on "VINTAGE IVORY" handle by the scrimshander. The bolster features a deep relief scroll engraving on one side , with a beautiful feminine face on the other side of bolster. All scrimshaw on Ben Shostle engraved items are done by his daughter Benita Bonshire, super talented, schooled artist, as seen in this beautifully scrimmed nude. NO SHEATH. Included is a Ben Shostle Arms Engraver pamphlet, which contains pictures of Ben's engravings, scrimshaws, by his daughter, and information about the artists. This knife has Never been used or carried. Must be 18 years old to buy this knife..



37" MANUAL STICK SHIFT SWORD CANE. 37" OVERALL LENGTH BROWN MANUAL STICK SHIFT AS HANDLE 12" 440 STAINLESS STEEL SWORD BLADE INSIDE



The blade is the first thing you will notice with the chaotic ocean current patterns that are just exquisite. It is constructed from premium quality Damascus that is made from 1095/15n20 alloy steel. The Rockwell rating is 58-60 with 176 true blade layers. The blade tapers towards the tip with parallel edges that come sharp. The cross guard is made from steel with an etching of an Odins eye weave. Odins eye is a symbol of perception and worldly understanding; in other words wisdom. The grip is just as eye catching as the blade as it is made from high quality materials like hand carved bone and stained wood with brass spacers. The triple lobe pommel is attributed to the Anglo Saxons. The center lobe being quite bulbous compared to the two outside lobes. Similar etching is on the pommel matches the cross guard. Included is a sheath with a back strap that is made from premium leather that has been hand sewn. This blade was made for nothing more than battle. Overall Length: 32.25 Inches.



 9in Ninja Set of 3 White Throwing Knives Red  Set of three throwers! 9in Set is an excellent choice for throwing and putting on display. In the anime and manga, often explosive spell-bound tags are attached to the loops and the throwing knives, are stuck to something. The 9in knife Set comes With a Nylon Sheath that fits all three. Handle is wrapped with Black Cordage. 440 Stainless steel blade with flat black ''ninja'' finish.*Must be 18 years or older to buy* Specifications Overall Length: 9 Inches Blade Length: 5.3 Inches Blade Material: 440 Stainless Steel Blade Thickness: 3mm Tang: Full Tang Sharpness & Functionality: Very Sharp, Great for Throwing & Display Blade Features: Double Edge, Spear Point, Ridgeline Handle Length: 3.75 Inches Handle: Cord Wrapped Other Features: Finger Loop Includes: Black Nylon Sheath, Triple Pouch Finish: Flat Black, White



A perfect tool to have on hand for the next attack, this unique liner lock knife features dual razor sharp blades. Sporting a bio hazard symbol and Killer emblem, each blade is constructed from 440 stainless steel with a titanium finish and comes with ambidextrous thumb studs to allow for swift and quick deployment. The aluminum handle features a black metallic textured finish and the end of the pommel has an extra-large ring hole for a more secure grip. The finger ring can also be used in a punching motion as an extra defense mechanism and adding even more functionality; is designed to also be used as a bottle opener in a pinch. Double wall reinforced, the handle houses the liner locking mechanism to lock the blades in place while the spine offers a supporting bar with a thumb rig for extra support. The knife is equipped with a strong and sturdy pocket clip which is raised to allow for better ease of use. Overall Length: 10 Inches Blade Length: 4 Inches Blade Material: Stainless Steel, Titanium finish, Silver edge Blade Style: Dagger point, Double edge Handle Length: 6 Inches Handle Material: Aluminum, Black Metallic finish Includes: Pocket Clip and Bottle Opener



3 PIECE SAMURAI SWORD SET 3 Piece Samurai Sword Set 3Pcs Black Samurai Sword Set Carbon Steel Blade Japanese Inscriptions Black Wood Scabbard Includes Wood Display Stand You must be at least 18 years old to purchase products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local, state and federal laws is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



High quality

We take pride in the quality and originality of our products

Fast Delivery

Our products reach our clients in a timely and discreet manner

24/7 support

We provide support for all customers at all times

14 - Day Returns

If there are any defects upon arrival, do return the weapon and be refunded in full.