+1 (702) 963 3706
This is a First gen, BROWNING CITORI 4Gauge skeet set. I’m original carry case. NOTE: it has Barrel inserts for the 20, 28 and 410 gauges. A must have!!! UPC ECOM00174677 Gauge 12 / 20 / 28 / 410 GA Finish BLUED W/ ENGRAVING Capacity 2 ROUNDS Weight NOT SPECIFIED Action OVER UNDER Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 28 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED BROWNING CITORI SKEET quantity
DPMS continues to provide you with quality firearms that you can trust for any popular shooting sports discipline. This particular Panther model features a set of forged aluminum upper and lower receivers which are standard throughout the industry as meeting the military specification. The crown jewel of this rifle is the 16? Lightweight FNC Melonite treated barrel. The Ferritic Nitrocarburizing is a hardening process which improves barrel performance over mil-spec chrome plating in terms of barrel longevity, corrosion resistance and accuracy. By diffusing carbon and nitrogen into the barrel steel rather than adding a layer of material (as is the case in traditional chrome plating) the LCAR barrel is more durable and corrosion resistant without negatively effecting accuracy. Specifications and Features: DPMS 5.56 LCAR AR-15 Semi Auto Rifle 60140 Direct Gas Impingement System Carbine Length Gas System 5.56 NATO (Accepts .223 Remington) 16? Lightweight FNC (Melonite) Treated Barrel 1:8? Twist Rate Threaded 1/2×28 Forged 7075-T6 Aluminum M4 Flat Top Upper Receiver Forged 7075-T6 Aluminum Lower Receiver Mil-Spec Buffer Tube 6 Position M4 Stock A2 Flash Hider Fixed Front Sight Base (F Marked) Magpul Flip Up Rear sight Synthetic Polymer Glacier Hand Guard 30 Round Magazine Accepts Standard Pattern AR-15 Magazines A2 Pistol Grip Standard Sling Loop Bayonet Lug Type III Hard Coat Anodized Upper/Lower Receiver Finish Overall Length 36.5? Overall Weight 6.4lbs Matte Black
It’s a hoot to shoot for sure and maybe more so than my SP5 (just maybe). So trying out a few options and started farkling out the PDW. Starting out with the following: Rear Drum (thx to @ Indreams84) Magpul forend/handguard HS1 finger light (green laser). Had to dremel out a hole for HS1 laser to poke/emitt through. Worked out great. JMAC Brace 8” raised arm bar 1913 SigMech folder Cheekweld affixed to top of brace (holes are predrilled and threaded) Gearworks Tailhook MOD1C Also saw the B&T retractable stock at LGS as another option that I’m going to ponder on: Per the measurements it seems that when retracted with MAGPUL forend/handguard appears to be issue. It would appear to be an unfavorable check rest but guess one can adjust and get used to it. It would appear the small end, would not seat great in shoulder/pec area, but again guess you can find a good area to pocket it into and get used to it quickly. Appears to retract really nice and seems compact and extends easily, and seems like great lockup with very minor up/down flex, hopefully minimal rubbing along body frame. so will also soon consider the Vertical grip and will need to pay it visit at the LGS soon again while pending the process. The JMAC Brace Pros: It’s a Brace and cheek hold is really comfortable and supportive. if you wanted to add an RMR/Optic it’s adjustable to slide up and down via the pic-rail and sig mech. I ended up cutting out the foam and was able to fit in it’s folded condition. It’s tight and although does fully seat, it closes and works out fine. Let’s see your SP5K-PDW Stock or Brace here in order to see the various options out there for the PDW.
Type: RIFLE Make: ARSENAL Model: SAM7SF Caliber: 7.62X39MM Condition: GREAT, UNFIRED W/ BOX WOOD GRIPS SIDE FOLDER W/ BOX +++ OG PLASTIC GRIP/ HANDGUARD UPC ECOM00173763 Caliber 7.62 X 39 MM Finish WALNUT Capacity 30 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED
American Tactical Imports (ATI) showed off their AR-15 shotgun chambered in .410 gauge a few years back, well they’re finally coming out. I was walking through ATI’s booth to go fondle their MP-40 replica chambered in 9mm when I stumbled on the Omni Hybrid .410 shotgun. The new shotgun uses ATI’s OMNI Hybrid Mil-Spec, multi-caliber, polymer and metal lower receiver. The lower also uses a standard AR-15 6 position stock. The upper has a 2.5? chamber and an 18.5? barrel, 13? free float rail with Key MoD slots and a full length Picatinny rail up top. The Omni Hybrid .410 will include a 5 round magazine but a 15 round mag will also be available. The mags also have round count holes along the side. ATI claims their new Omni Hybrid .410 is compatible with most bird shot, buck shot and slugs on the market. I got to play around with it a bit and it’s pretty light, they didn’t have an exact weight but according to their prototype from a few years back they claimed it was only 6.5lbs.
Barrett Firearm Manufacturing, Inc. model M107 .50 BMG semi auto rifle. This is actually marked M107 which is the military quality version of the famous M82A1. This example is all steel construction with a 32? fluted barrel with a dual-chevron muzzle break, flip-up peep rear sight, detachable carry handle and a Nightforce Precision NXS scope. The rifle includes two magazines, a folding metal bi-pod, AR-15 style grip and safety and a rubber padded butt stock with club foot style hand rest and rear mono pod. Everything comes neatly packaged in a Pelican 1750 hard case. Condition: New and un-fired. Dimensions 32 Artist or Maker M107 Notes .50 BMG
New unfired direct from the factory Ruger AR-556. Rifle is equiped with quad rail, fore grip with bi pod, and flip up rear sight. This semi-automatic M4-style direct impingement modern sporting rifle offers an affordable, American-made modern rifle with the rugged reliability that we have come to expect from Ruger. Extensively tested during its development, the AR-556 is constructed from top-quality components, including forged 7075-T6 aluminum upper and lower receivers and a cold hammer-forged chrome-moly steel barrel with M4 feed ramp cuts. Chambered in 5.56 NATO, the AR-556's carbine-length, flat-top, M4 design is fully configured with a Ruger Rapid Deploy folding rear sight, milled F-height gas block with post front sight, forward assist, dust cover, brass deflector, telescoping six-position stock, improved trigger-reach grip, enlarged trigger guard and one 30-round Magpul PMag. Standardized M4/AR components are utilized throughout, so the AR-556 can be customized easily.
OSS UPC ECOM00161370 Caliber 270 WIN Finish BLUE Capacity 4+1 ROUNDS Weight NOT SPECIFIED Action BOLT ACTION Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 23 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED
The fast-handling and quick-shooting FN SCAR® 16S is upgraded with Non-Reciprocating Charging Handles. The new, dual charging handles enable any shooting position, grip style or optic choice, ensuring any braced or barrier-contact position shoots flawlessly. A rugged, monolithic upper receiver with MIL-STD-1913 rail provides space for rail-mounted accessories, and a folding buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 16S in 5.56x45mm is the benchmark for reliability and versatility from a light recoiling, piston-driven platform. All current 16S SCARs are Belgium made, there are those that were VA or SC assembled. However, FN might be no longer importing the 16S and resort to US made only. 98521-2 FN SCAR® 16S NRCH 5.56x45mm Blk 16-in 30-Rnd 845737013622 98621-2 FN SCAR® 16S NRCH 5.56x45mm Blk 16-in 10-Rnd 845737013639 98501-2 FN SCAR® 16S NRCH 5.56x45mm FDE 16-in 30-Rnd 845737013561 98601-2 FN SCAR® 16S NRCH 5.56x45mm FDE 16-in 10-Rnd 845737013615
We take pride in the quality and originality of our products
Our products reach our clients in a timely and discreet manner
We provide support for all customers at all times
If there are any defects upon arrival, do return the weapon and be refunded in full.