+1 (702) 963 3706
The legendary FN SCAR® 20S is upgraded with Non-Reciprocating Charging Handles. Perfectly calibrated for long-range fire, the FN SCAR 20S delivers surgical precision, with an enhanced set of controls to enable any shooting position or optic choice. The rugged, monolithic upper receiver with full-length MIL-STD-1913 rail provides more space for rail-mounted accessories, and a precision buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 20S is the benchmark for long-range precision from a gas-driven piston platform, delivering a highly accurate and proven design for target shooting and law enforcement applications. Product follows USA specifications CALIBER: 6.5 Creedmoor or 7.62×51 mm OPERATION: Short-stroke gas piston MAG CAPACITY: 10 Rd. BARREL LENGTH: 20? OVERALL LENGTH: 41”-42.8” WEIGHT: 11.6 lbs. PRIMARY FEATURES New bolt carrier assembly with NRCH enables any shooting position or optic choice, reduces felt recoil Extended monolithic receiver Short-stroke gas piston RECEIVER Hard-anodized monolithic aluminum MIL-STD-1913 accessory rails at 3, 6, 9, and 12 o’clock positions BARREL Cold hammer-forged, chrome-lined, free-floating heavy contour barrel TRIGGER Two-Stage Match trigger (Geissele® “Super SCAR”) STOCK Precision adjustable for LOP and comb height Adjustable cheekpiece Hogue® rubber grip with finger grooves OPERATING CONTROLS Dual, ambidextrous charging handles remain static under fire, user swappable left/right Ambidextrous safety lever and magazine release Enlarged trigger guard for easier access when wearing gloves Composite polymer trigger module MAGAZINE Uses FN SCAR® 17S magazines Steel magazine body Low-friction follower
Type: RIFLE Make: ARSENAL Model: SAM7SF Caliber: 7.62X39MM Condition: GREAT, UNFIRED W/ BOX WOOD GRIPS SIDE FOLDER W/ BOX +++ OG PLASTIC GRIP/ HANDGUARD UPC ECOM00173763 Caliber 7.62 X 39 MM Finish WALNUT Capacity 30 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED
OSS UPC ECOM00161370 Caliber 270 WIN Finish BLUE Capacity 4+1 ROUNDS Weight NOT SPECIFIED Action BOLT ACTION Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 23 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED
Does not include magazine or case. UPC ECOM00160785 Caliber 223 Finish BLACK Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED
NEW IN BOX---NO CC FEES---Panther 7.62 NATO Oracle has 16 in barrel made of 4140 Chrome moly steel. Has 6 grooves, right hand 1X10 twist, button rifled. DPMS 6 Position Pardus Stock. Milled from a solid billet of 6061-T6 aluminum, Hard coat anodized per Mil Spec, Integral trigger guard, Aluminum magazine release button, Standard AR-15 trigger group.
It’s a hoot to shoot for sure and maybe more so than my SP5 (just maybe). So trying out a few options and started farkling out the PDW. Starting out with the following: Rear Drum (thx to @ Indreams84) Magpul forend/handguard HS1 finger light (green laser). Had to dremel out a hole for HS1 laser to poke/emitt through. Worked out great. JMAC Brace 8” raised arm bar 1913 SigMech folder Cheekweld affixed to top of brace (holes are predrilled and threaded) Gearworks Tailhook MOD1C Also saw the B&T retractable stock at LGS as another option that I’m going to ponder on: Per the measurements it seems that when retracted with MAGPUL forend/handguard appears to be issue. It would appear to be an unfavorable check rest but guess one can adjust and get used to it. It would appear the small end, would not seat great in shoulder/pec area, but again guess you can find a good area to pocket it into and get used to it quickly. Appears to retract really nice and seems compact and extends easily, and seems like great lockup with very minor up/down flex, hopefully minimal rubbing along body frame. so will also soon consider the Vertical grip and will need to pay it visit at the LGS soon again while pending the process. The JMAC Brace Pros: It’s a Brace and cheek hold is really comfortable and supportive. if you wanted to add an RMR/Optic it’s adjustable to slide up and down via the pic-rail and sig mech. I ended up cutting out the foam and was able to fit in it’s folded condition. It’s tight and although does fully seat, it closes and works out fine. Let’s see your SP5K-PDW Stock or Brace here in order to see the various options out there for the PDW.
The legendary FN SCAR® 20S is upgraded with Non-Reciprocating Charging Handles. Perfectly calibrated for long-range fire, the FN SCAR 20S delivers surgical precision, with an enhanced set of controls to enable any shooting position or optic choice. The rugged, monolithic upper receiver with full-length MIL-STD-1913 rail provides more space for rail-mounted accessories, and a precision buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 20S is the benchmark for long-range precision from a gas-driven piston platform, delivering a highly accurate and proven design for target shooting and law enforcement applications. Product follows USA specifications CALIBER: 6.5 Creedmoor or 7.62×51 mm OPERATION: Short-stroke gas piston MAG CAPACITY: 10 Rd. BARREL LENGTH: 20? OVERALL LENGTH: 41”-42.8” WEIGHT: 11.6 lbs. PRIMARY FEATURES New bolt carrier assembly with NRCH enables any shooting position or optic choice, reduces felt recoil Extended monolithic receiver Short-stroke gas piston RECEIVER Hard-anodized monolithic aluminum MIL-STD-1913 accessory rails at 3, 6, 9, and 12 o’clock positions BARREL Cold hammer-forged, chrome-lined, free-floating heavy contour barrel TRIGGER Two-Stage Match trigger (Geissele® “Super SCAR”) STOCK Precision adjustable for LOP and comb height Adjustable cheekpiece Hogue® rubber grip with finger grooves OPERATING CONTROLS Dual, ambidextrous charging handles remain static under fire, user swappable left/right Ambidextrous safety lever and magazine release Enlarged trigger guard for easier access when wearing gloves Composite polymer trigger module MAGAZINE Uses FN SCAR® 17S magazines Steel magazine body Low-friction follower
Remington Model 700 AAC-SD .300 Blackout & Bipod 16.5" 5-R Tactical Threaded Barrel / Tiptop Bipod, Remington 700 AAC-SD bolt-action rifle. It's chambered in the desierable .300 Blackout, Hogue stock, with 5-R Tactical 1:7 Twist 16.5" threaded barrel, with removable muzzle device. Other features include Weaver rail and Tiptop bipod. Rifle has been lightly shot, exhibits no major signs of wear or abuse, and has an excellent looking bore. Exactly as pictured...Thanks for looking!
American Tactical Imports (ATI) showed off their AR-15 shotgun chambered in .410 gauge a few years back, well they’re finally coming out. I was walking through ATI’s booth to go fondle their MP-40 replica chambered in 9mm when I stumbled on the Omni Hybrid .410 shotgun. The new shotgun uses ATI’s OMNI Hybrid Mil-Spec, multi-caliber, polymer and metal lower receiver. The lower also uses a standard AR-15 6 position stock. The upper has a 2.5? chamber and an 18.5? barrel, 13? free float rail with Key MoD slots and a full length Picatinny rail up top. The Omni Hybrid .410 will include a 5 round magazine but a 15 round mag will also be available. The mags also have round count holes along the side. ATI claims their new Omni Hybrid .410 is compatible with most bird shot, buck shot and slugs on the market. I got to play around with it a bit and it’s pretty light, they didn’t have an exact weight but according to their prototype from a few years back they claimed it was only 6.5lbs.
We take pride in the quality and originality of our products
Our products reach our clients in a timely and discreet manner
We provide support for all customers at all times
If there are any defects upon arrival, do return the weapon and be refunded in full.