36 item(s)
Check Out

Total Price : $70632

CASE XX NOBLE TRIO STAG HANDLE 3 PIECE CARVER SET

CASE XX NOBLE TRIO STAG HANDLE 3 PIECE CARVER SET

Item ID:

17385487

UPC:

1817577089

$397$300

Availability - In Stock

PRODUCT INFO

Category:

Knives & swords

Type:

Knives & swords

Brand:

Noble Trio Stag

Model:

Noble Trio Stag

Caliber:

00

TECHNICAL SPECS

Capacity:

12.5 inch knife

Weight:

00

Material:

Steel

Sight:

Fixed Blade

Purpose:

Knives & swords

Case XX Noble Trio Stag Handle 3 Piece Carver Set Great used condition with original storage case. Heavy Stag handles on sharp 12.5 inch carving knife, 10.5 inch meat fork, and 13 inch sharpening steel. This line of cutlery produced in the 1960's is hard to find. The satin interior of the embossed storage case may need cleaning but this set is sure to grab attention at your holiday table

Write a review




2-piece Chinese Hook Sword Set Silver - XL1112 Dominate your dojo with these Chinese twin hook swords! Martial arts enthusiasts will enjoy using these traditional weapons! Each sword measures 33 1/4" overall and offers one-piece stainless steel construction and authentic pattern design with a black finish. Corded wrapped grip on handles One piece stainless steel construction Fully functional set of two 33 1/4" overall legnth of each sword Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle. In the 18th century the cane replaced the sword as an essential part of a gentleman's attire. While the cane was used as a walking stick it could also be used as a sword, or contain hidden compartments for alcohol or a firearm. The great men of the last two centuries have carried canes, from Sherlock Holmes, to Gregory House and of course Scrooge McDuck. Every Gentleman Requires a Cane. This cane is not a substitute for a medical walking device. The cane shaft has been constructed from steel with a black glossy finish. Hidden inside of the black metal shaft is a 12” hidden blade made of stainless steel, which can be accessed by unscrewing the handle. The bottom of the cane features a tough rubber gripper. The head of the cane has been constructed from steel with Rolling Evil Eye With Skeletal Hand Handle. Cane Overall Length: 37" Blade Length: 12" Handle Length: 4" Handle Width: 2" Cane Shaft Material: Steel Cane Head Material: Steel



This sword is constructed of stainless steel with a factory edge. The guard and wooden handle have a glossy red finish to match the wooden scabbard. Overall length is 41 inches.



The bandit of Sherwood Forest, Robin of Locksley, is fabled to have stolen from the rich to help the poor. The legendary outlaw and his band of followers engaged in countless mischievous adventures that frustrated the evil Sheriff of Nottingham. Leather sheath is included with the purchase of this high quality sword.



3 PIECE SAMURAI SWORD SET 3 Piece Samurai Sword Set 3Pcs Black Samurai Sword Set Carbon Steel Blade Japanese Inscriptions Black Wood Scabbard Includes Wood Display Stand You must be at least 18 years old to purchase products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local, state and federal laws is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



This is one solid wooden construction sword from top to bottom. The cross-guard is a stylized cat's head, with two triangles on the top half curving into ear-points and the bottom half tapering down into a single point. The blade is made from wood, painted in silver followed by the wooden handle wrapped with nylon cord. The scabbard is all wood with a black high gloss lacquer finish with a brown bull horn knot. This sword is perfect for cosplay, conventions or just plain pretending. Specifications: Overall Length: 39.5" Blade Length: 27" Handle Length: 10"



American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished.



Yo, ho ho! What better way to show off your swash-buckling pirate attire than adding the finishing touch that is a ravishing sword belt? The belt is handmade from brown leather, adorned with circular brass studs and 3 signature skull and cross bone studs, with a large square buckle to hold the belt in place. Though this belt is made for a smaller cutlass sword, the sword frog attached to the belt has two adjustable straps with pure brass buckles to fit swords of various shapes and sizes.



An original and early (Pat.Pending) Buck Model 184 Combat/Survival knife with its original sheath, attachment points and compass. Blade is excellent with no abuse and very sharp.



35 in Fantasy Sword PK2460-355 Fantasy Sword & Chain, All metal construction Overall Length: 35 , Shaft is 1 diameter polished stainless steel Handle Width 8-3/4 Blade width 4, Blade is not sharp Chain is approximately 24 long Handle Rotates on shaft and has foam grip Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



1840 CSA/NCO Confederate Non-Commisioned Officer Short Sword with Steel scabbard 1840 United States Army NCO Sword with Steel scabbard. 1840 United States Army NCO Sword with Steel scabbard The United States Army Non-Commissioned Officer sword was adopted by the War Department in 1840. The Army Noncommissioned Officer Sword has been worn by Army sergeants for over 100 years. It is primarily used today for honor guards and presentations such as PCS and change of command. Our swords have been purchased by the Army NCOA ( Non Commissioned Officers Academy) as well as National Guard and US Army military bases around the world. Specifications Overall Length: 37 Inches Blade Length: 31.5 Inches Blade Material: Steel Handle Material: Brass Scabbard: Metal Replica of the Model 1840 United States Army NCO Sword



Other Product details

2-piece Chinese Hook Sword Set Silver - XL1112 Dominate your dojo with these Chinese twin hook swords! Martial arts enthusiasts will enjoy using these traditional weapons! Each sword measures 33 1/4" overall and offers one-piece stainless steel construction and authentic pattern design with a black finish. Corded wrapped grip on handles One piece stainless steel construction Fully functional set of two 33 1/4" overall legnth of each sword Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished.



Medieval Sword Metallic Chrome Blade Spark Foam Irish Ring SPARKFOAM SWORD   Features of Spark Foam: 1. High Density Durable "EVA Foam" 2. Special Coating that will NOT wrinkle easily 3. Painting will NOT go off easily 4. Durable Fiberglass inner core inside, battle ready without cracking the sword   Specification Overall Length: 40" 32" Metallic Chrome Blade Handle Length; 8 " Straight Handguard with Black Handle & Circular Pommel All made of FOAM w/ inner core



. The DAGGER style knife is 8.25 inches OVERALL with 4 inch DAGGER BLADE signed on bolster side by the knife maker, and on "VINTAGE IVORY" handle by the scrimshander. The bolster features a deep relief scroll engraving on one side , with a beautiful feminine face on the other side of bolster. All scrimshaw on Ben Shostle engraved items are done by his daughter Benita Bonshire, super talented, schooled artist, as seen in this beautifully scrimmed nude. NO SHEATH. Included is a Ben Shostle Arms Engraver pamphlet, which contains pictures of Ben's engravings, scrimshaws, by his daughter, and information about the artists. This knife has Never been used or carried. Must be 18 years old to buy this knife..



The blade is the first thing you will notice with the chaotic ocean current patterns that are just exquisite. It is constructed from premium quality Damascus that is made from 1095/15n20 alloy steel. The Rockwell rating is 58-60 with 176 true blade layers. The blade tapers towards the tip with parallel edges that come sharp. The cross guard is made from steel with an etching of an Odins eye weave. Odins eye is a symbol of perception and worldly understanding; in other words wisdom. The grip is just as eye catching as the blade as it is made from high quality materials like hand carved bone and stained wood with brass spacers. The triple lobe pommel is attributed to the Anglo Saxons. The center lobe being quite bulbous compared to the two outside lobes. Similar etching is on the pommel matches the cross guard. Included is a sheath with a back strap that is made from premium leather that has been hand sewn. This blade was made for nothing more than battle. Overall Length: 32.25 Inches.



As the rival of Saizo and head of Sanada's ninja squad, Sasuke uses this Brave Ninja Sarutobi Spiked Knife while being a proud Koga warrior against the Ten. Sasuke Sarutobis loyalty towards Yukimura is strong and unwavering, and he will not forgive anyone who soils Sanada's name. He hates Iga Ninja, most notably Saizo Kirigakure. At the same time he acknowledges Saizo as a strong ninja and trusts him. His main weapons are two knives. Our Brave Ninja Sarutobi Spiked Knife is just like Sasukes with its spiked knuckle over a nylon wrapped oval handle. The large unsharpened blade comes down in a slight curve with silver waves down its spine. Grab your Brave Ninja Sarutobi Spiked Knife and join the ninja squad. Overall Length: 20.5 Inches Blade Length: 12.25 Inches Blade Thickness: 4mm, Tapered Blade Material: Carbon Steel, Oiled for Preservation Blade Finish: Satin and Black Finish Handle Length (inside): 4.75 Inches Handle Materials: Steel Nylon Wrapped



1840 CSA/NCO Confederate Non-Commisioned Officer Short Sword with Steel scabbard 1840 United States Army NCO Sword with Steel scabbard. 1840 United States Army NCO Sword with Steel scabbard The United States Army Non-Commissioned Officer sword was adopted by the War Department in 1840. The Army Noncommissioned Officer Sword has been worn by Army sergeants for over 100 years. It is primarily used today for honor guards and presentations such as PCS and change of command. Our swords have been purchased by the Army NCOA ( Non Commissioned Officers Academy) as well as National Guard and US Army military bases around the world. Specifications Overall Length: 37 Inches Blade Length: 31.5 Inches Blade Material: Steel Handle Material: Brass Scabbard: Metal Replica of the Model 1840 United States Army NCO Sword



1045 Carbon Steel  Blood Groove Samurai Katana     SpecificationsOverall Length: 40.25 InchesBlade Length: 27.75 InchesBlade Material: 1045 Carbon SteelBlade Thickness: 7mmTang: Full Length Steel TangSharpness & Functionality: Sharp, 8.5/10, Battle ReadyTsuba: Solid Steel, Black Oxide FinishHandle Length: 10.75 InchesHandle: Solid Hardwood, White Faux Rayskin, Black Ito WrapSaya: Hardwood, Black  FinishIncludes: Katana Sword Bag



High quality

We take pride in the quality and originality of our products

Fast Delivery

Our products reach our clients in a timely and discreet manner

24/7 support

We provide support for all customers at all times

14 - Day Returns

If there are any defects upon arrival, do return the weapon and be refunded in full.