+1 (702) 963 3706
This is a custom rifle set up for long range, it is a Deviant Chassis in 308, single shot, bolt action, RH Bolt, stainless bull barrel, stainless fluted bolt, LH eject with a Mark X 8x 80 scope on a Spuhr Mount and trigger set at around 1lb. The brown tape is slick “sled tape” to help recoil true in a straight line. Blue Marble Acrylic Stock with length and comb adjustments to make this fit you perfect. If you were to build and put this rifle together it would cost over $10,000. This is a steal! UPC ECOM00166741 Caliber 308 Finish STAINLESS Capacity 1 Weight NOT SPECIFIED Action BOLT ACTION Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 2.5 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED CUSTOM GUN GUILD SINGLE quantity
AR-15 pistol is a classification that exists due to some silly American gun laws and definitions. An AR pistol cannot have a stock, but can have a bare and exposed buffer tube. Another no-no is a vertical grip, but an angled grip like the Magpul AFG is legal. Now of course nobody wants to run afoul of the Federal Government, so it’s imperative that you understand what makes an SBR an SBR, and what makes AR pistols legal. It may appear to be complicated and obfuscated but the defining characteristics are pretty straight forward if you know what you’re looking for. AR-15 pistols can have barrels as short as you want them to. Personally, I own an AR-15 pistol with a 7.5-inch barrel and, while it is ridiculous, it’s a lot of fun. Over the last few years, the popularity of AR-15 pistols has grown significantly. This growth is mostly tied to the advent of stabilizing braces. Stabilizing braces turned a gaudy, heavy, and awkward gun into a stable, comfortable-to-shoot weapon. Why Would I Want One? We won’t dive too deep into the NFA, but the section that concerns this article is the law that rifles must have 16-inch barrels, or else they are regulated under the NFA. So, if you wanted an AR-15 with a 7.5-inch barrel, you’d have to pay a tax stamp, ask for permission, and wait for 3 to 6 months for approval. Once approved you could then own an SBR. Or you could just buy an AR pistol and skip all that. There are a lot of other reasons you might want an AR pistol, besides just the tax stamp.
THIS COMBO DEAL IS HARD TO BEAT!! DPMS AR 10 Oracle 308, RFLR 308/7.62, with TRUGLO RED DOT SIGHT, This Sight is Quality, the best i have found for the money,and LIFETIME WARRANTY, comparable to Aimpoint, 2 color choices red and green, 5 brightness settings, and 4 reticle choices, 2.5 moa Dot, 5 moa Dot, 2.5 moa circle Dot and 5 moa circle Dot, this has got you covered everything from close quarters to 100 yd plus, the rifle comes with Forward Assist, dust cover, Adjustable stock, flash hider, flattop rail, (1) 20 rd. Mag, 16? Chrome Moly Barre. ITEM INFO CATEGORY: Rifles TYPE: complete rifle BRAND: DPMS MODEL: Oracle AR10 CALIBER: 308 TECH SPECS CAPACITY: 20 WEIGHT: 45 MATERIAL: Black SIGHT: PURPOSE: Rifle
The legendary FN SCAR 17S is upgraded with Non-Reciprocating Charging Handles. The new, dual charging handles enable any shooting position, grip style or optic choice, user swappable in the field. The FN SCAR 17S ensures any braced or barrier-contact position shoots flawlessly. The rugged, monolithic upper receiver with a full-length MIL-STD-1913 rail provides more space for rail-mounted accessories, and a folding buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 17S is the benchmark for accuracy and versatility from a light recoiling, piston-driven platform. SPECS CALIBER: 7.62x51mm OPERATION: Short-stroke gas piston MAG CAPACITY: 10 or 20 Rd. WEIGHT: 8.0 lb. BARREL LENGTH: 16.25? OVERALL LENGTH: 36? – 38.5? TWIST RATE: 1:12 RH PRIMARY FEATURES New bolt carrier assembly with NRCH enables any shooting position or optic choice, reduces felt recoil Monolithic receiver Short-stroke gas piston RECEIVER Hard-anodized monolithic aluminum MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions Adjustable folding front and folding/removable rear iron sights BARREL Cold hammer-forged, chrome-lined, fully free-floating with compensator STOCK Telescoping side-folding polymer stock Adjustable cheekpiece A2-style pistol grip OPERATING CONTROLS Dual, ambidextrous charging handles remain static under fire, user swappable left/right Ambidextrous safety lever and magazine release Enlarged trigger guard for easier access when wearing gloves MAGAZINE Steel body Low friction follower
The legendary FN SCAR® 20S is upgraded with Non-Reciprocating Charging Handles. Perfectly calibrated for long-range fire, the FN SCAR 20S delivers surgical precision, with an enhanced set of controls to enable any shooting position or optic choice. The rugged, monolithic upper receiver with full-length MIL-STD-1913 rail provides more space for rail-mounted accessories, and a precision buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 20S is the benchmark for long-range precision from a gas-driven piston platform, delivering a highly accurate and proven design for target shooting and law enforcement applications. Product follows USA specifications CALIBER: 6.5 Creedmoor or 7.62×51 mm OPERATION: Short-stroke gas piston MAG CAPACITY: 10 Rd. BARREL LENGTH: 20? OVERALL LENGTH: 41”-42.8” WEIGHT: 11.6 lbs. PRIMARY FEATURES New bolt carrier assembly with NRCH enables any shooting position or optic choice, reduces felt recoil Extended monolithic receiver Short-stroke gas piston RECEIVER Hard-anodized monolithic aluminum MIL-STD-1913 accessory rails at 3, 6, 9, and 12 o’clock positions BARREL Cold hammer-forged, chrome-lined, free-floating heavy contour barrel TRIGGER Two-Stage Match trigger (Geissele® “Super SCAR”) STOCK Precision adjustable for LOP and comb height Adjustable cheekpiece Hogue® rubber grip with finger grooves OPERATING CONTROLS Dual, ambidextrous charging handles remain static under fire, user swappable left/right Ambidextrous safety lever and magazine release Enlarged trigger guard for easier access when wearing gloves Composite polymer trigger module MAGAZINE Uses FN SCAR® 17S magazines Steel magazine body Low-friction follower
Built from a MIL-SPEC foundation with HP/MPI-tested and certified bolt and M16-style bolt carrier group with mid-length gas system and H buffer, the TAC3 performs reliably. Superior accuracy and performance come from the company's signature chrome-lined, cold hammer-forged barrel made from FN proprietary steel, fully free-floated within a Hodge Defense-designed wedge lock handguard. The rigid handguard, affixed with a proprietary barrel nut and anti-rotation technology, provides continues 12 oclock rail space and multiple M-LOK attachment points for lights, lasers and other accessories while minimizing deflection during hard use. Outfitted with ambidextrous charging handle and selector, and FNs custom 6-position buttstock, pistol grip and magazine, the FN 15 TAC3 is a streamlined, rugged carbine ready for any situation. This model comes with ambidextrous radians controls.
DPMS continues to provide you with quality firearms that you can trust for any popular shooting sports discipline. This particular Panther model features a set of forged aluminum upper and lower receivers which are standard throughout the industry as meeting the military specification. The crown jewel of this rifle is the 16? Lightweight FNC Melonite treated barrel. The Ferritic Nitrocarburizing is a hardening process which improves barrel performance over mil-spec chrome plating in terms of barrel longevity, corrosion resistance and accuracy. By diffusing carbon and nitrogen into the barrel steel rather than adding a layer of material (as is the case in traditional chrome plating) the LCAR barrel is more durable and corrosion resistant without negatively effecting accuracy. Specifications and Features: DPMS 5.56 LCAR AR-15 Semi Auto Rifle 60140 Direct Gas Impingement System Carbine Length Gas System 5.56 NATO (Accepts .223 Remington) 16? Lightweight FNC (Melonite) Treated Barrel 1:8? Twist Rate Threaded 1/2×28 Forged 7075-T6 Aluminum M4 Flat Top Upper Receiver Forged 7075-T6 Aluminum Lower Receiver Mil-Spec Buffer Tube 6 Position M4 Stock A2 Flash Hider Fixed Front Sight Base (F Marked) Magpul Flip Up Rear sight Synthetic Polymer Glacier Hand Guard 30 Round Magazine Accepts Standard Pattern AR-15 Magazines A2 Pistol Grip Standard Sling Loop Bayonet Lug Type III Hard Coat Anodized Upper/Lower Receiver Finish Overall Length 36.5? Overall Weight 6.4lbs Matte Black
Does not include magazine or case. UPC ECOM00160785 Caliber 223 Finish BLACK Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED
BRAND NEW NEVER FIRED, NO OPTION TO LIST AS SUCH ON GUNS.COM Custom Anderson AR-15 with Red Dot, Custom Trigger, Bag, 30rd Mag Forward Grip 5.56/.223. This is chambered in a 5.56NATO/.223REM. Comes with a Scope/Red Dot combo, forward grip for the red MLOK handguard, zipped soft case, Rise drop in trigger, red accent parts throughout the build and a six position stock. UPC ECOM00169071 Caliber 5.56 Finish 1 Capacity 30 Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED
We take pride in the quality and originality of our products
Our products reach our clients in a timely and discreet manner
We provide support for all customers at all times
If there are any defects upon arrival, do return the weapon and be refunded in full.
In light of recent global events, more people than ever are considering arming themselves for self-defense. From 2011 to 2013, the CDC reports that over 3,380 Americans died from terrorists attacks on U.S. soil. Do you want to get a guns? Buy a gun now...
© 2019 OUTDOORS ARMORY, All Right Reserved
