CZ 805 BREN A2 10.9 INCH POST SAMPLE MACHINE GUN

This Chester County Armory listing is for a rarely seen P.A.W.S. Inc. Model ZX-7 .45acp transferable sub machine gun. Also known as "The American Sterling", this rare and uniquely US-made ZX-7 serves as a fascinating homage to the venerable British Sterling L2A3 sub machine gun. Always enamored with the craftsmanship and design of the British Sterling, the ZX-7 was built and created by gunsmith and Class 2 manufacturer Bob Imel at his company, Police Automatic Weapons Services, in Salem, OR in the mid 1970's. Built from the ground up, Mr. Imel re-created the beautiful lines and wonderful reliability of the L2A3, but with his own unique redesigns and improvements, to make it a truly Americanized version. Of course, the improvements started first and foremost, by offering it in the American of all American calibers...the .45ACP. For an in-depth analysis of the differences between the British Sterling L2A3 and Bob Imel's creation, check out Ian at Forgotten Weapons and his wonderful video on the subject: https://www.youtube.com/watch?v=VKk9Ss6RJ80 Utilizing easy-to-come-by M3 Grease gun magazines, the ZX-7 functions amazingly well, with a cyclic rate of around 750 RPMS, making it markedly faster than the M3 Grease Gun and more inline with a 1928 Thompson. Robust and controllable, the ZX-7 in .45acp was only made in very small numbers by P.A.W.S. as a transferable SMG. Some counts have them as low as 20 or 25, as the 9mm version (the P.A.W.S. ZX-5), was made in significantly greater quantities. This specific model is serial number 20. This transferable sub machine gun is in excellent mechanical, as well as cosmetic condition. The internals do not note any wear and the bore is bright and shiny with crisp and clean rifling. The fire controls are in excellent condition, with solid placements on the selector controls in both semi-automatic and full-automatic modes, as well as a positive safety lockup. The original crinkle-style finish employed by Mr. Imel is in excellent condition, with only a few minor marks on the entire weapon. The metalwork is excellent, with no dings, dents, gouges, cracks, etc.. Two 30rd magazines are included with the purchase. This rare and unique weapon is currently on a Form 3 for easy transfer, with "P.A.W.S. Inc" listed as the manufacturer and "ZX7" listed as the model. FOR MORE INFORMATION ON THIS LISTING CONTACT OUR WEBSITE AT OUTDOORSARMORY.COM

The Beretta BM59 Mk. IV SAW (squad-automatic-weapon) version, with its 44.48-inch overall length, a pistol grip and a heavy bipod, was also produced for export to Nigeria. Each of these variants of the BM59 featured a distinctive “tri-compensator”—a device combining a bayonet lug, a grenade launcher and a recoil compensator/flash suppressor in a single unit. The Beretta BM59 was a success as a military weapon and was used not just by Italy and Nigeria (the latter well into the 1990s), but also Algeria, Morocco, Ethiopia, Indonesia, Libya, Somalia and Argentina. In addition, the design was popular as a firearm for the civilian market. During the 1980s, two semi-automatic only versions of the BM59 were sold in the USA: the BM62 without “tri-compensator” and the BM69 with “tri-compensator” and bipod. Though they may not be abundant in number, the BM59/BM62/BM69 family of firearms provides an example of the way the spirit of John Garand reached through to the end of the 20th century. The military history of John Garand’s legendary semi-automatic rifle is typically situated in the Second World War and through the Korean War. Even though it lived on through the mid-’50s in National Guard, reserve and training units, the M1’s U.S. service history was over by that time. But, the spirit of John Garand extended beyond the M1 with the M14’s adoption, and it also stretched through to the end of the 1980s in foreign military service, thanks to the development of another rifle that modified some of the basic elements of the M1’s design to become the Fucile Automatico Leggero Beretta BM59 battle rifle. In 1949, Italy joined the North Atlantic Treaty Organization (NATO), and the following year it began obtaining M1 rifles from the U.S.A. through foreign military sales—more than 100,000 of them. But, by the mid-50s the Garand was a bit of a dated design in need of modernization. Battle rifles of that era had developed toward a specific group of features—lightweight, selective-fire, magazine-fed and chambered for the new 7.62 NATO cartridge—and the M1 needed work in every category in order to conform to that standard. Toward that end, an engineer at Beretta named Domenico Salza took on the mission of improving John Garand’s masterpiece, resulting in the Beretta BM59.

NFA Class 3 Ruger AC-556 machine gun in .223 and with 18.5” barrel. The action and bore are very good and this one works perfectly. Just test fired with two magazines and ran flawlessly with both steel and brass. Serial is 191-04059. Includes one 30rd magazine.

This is a genuine Law Enforcement Colt Factory rifle, brand new in the box. This is a NEW OLD STOCK COLT LE6933 COMMANDO factory made short barrel rifle. It is marked “M4 Carbine” and “Colt Defense”. This is one of the early guns WITHOUT the ugly QR scan matrix stamped into the side (Making it more collectable). All of the recent production COLT rifle and SBR receivers have the QR code on the left side above the selector. Includes the factory accessory kit with two (2) alloy magazines, cleaning kit, QD sling swivel, sling..the Colt M4 Commando provides the superior qualities that will enable operators to accomplish an increasingly wide range of combat missions. designed to exploit firepower capability in confined spaces where lightweight mobility, speed and violence of action rule can be comfortably carried with its 11.5” barrel, yet be instantly available to provide the type of firepower required to outmatch combatants full 5.56mm power and accuracy in a very compact sub-machine gun size weapon LE6933 SPECIFICATIONS CALIBER 5.56×45 NATO (.223 Rem.) WEIGHT 6.2 lbs (2.84 kg) OVERALL LENGTH (STOCK RETRACTED) 27 in. (66 cm) OVERALL LENGTH (STOCK EXTENDED) 30in. (74.9 cm) BARREL LENGTH 11.5 in. (26.2 cm) RATE OF FIRE SEMI RIFLING 1/7 RH EFFECTIVE RANGE 400 m. Colt LE 6933 M4 COMMANDO Short Barreled Rifle(SBR)new in box. Original new COLT manufactured M4 Carbine 5.56mm cal. with 11.5? barrel. Original accessories are included (sling, two (2)20 rd Magazines, manual). This is a Title II semi-automatic weapon and is fully transferrable. ITEM INFO CATEGORY: Machine Guns TYPE: Machine guns BRAND: COLT MODEL: M4 Commando CALIBER: 5.56×45 NATO (.223 Rem.) TECH SPECS CAPACITY: 30-39 WEIGHT: 33 MATERIAL: Black SIGHT: Fixed PURPOSE: MACHINE GUNS

Brand new in box; unfired, DPMS Panther Arms LR-308 Oracle. AR-10 variants have long held an important place on the battlefield as special-purpose rifles for designated marksmen. Now DPMS Panther Arms has been one of the manufacturers leading a new resurgence in the tactical use of the 7.62X51 NATO round with its Long Range 308 line. ITEM INFO CATEGORY: Machine Guns TYPE: Semi-Automatic Rilfes BRAND: DPMS MODEL: Oracle CALIBER: 5.56mm NATO TECH SPECS CAPACITY: 30-39 WEIGHT: 45 MATERIAL: Black SIGHT: Fixed PURPOSE: Semi Auto Rifle

Ive got one of the first versions of Clayco Underfolder AK-47/s 7.62×39 ever imported. Min Shan factory underfolder in 7.62×39. For sale or trade. In great shape, lightly used. I only put about 70 rounds through it. Outer cosmetic appearance is very good. numbered parts all match of course. Comes with Chinese sling pictured, 1 chinese flatback mag and a nice condition russian bakelite mag Mainly interested in trading at this time, will sell for 28000 or trade, no lowballers its highly unlikely you will find these for much cheaper ever again, Will sell clayco for 28000 plus transfer cost or shipping.

Beautiful PORTUGUESE Vickers machinegun with perfectly-duplicated VSM side plate. Fully Transferable. An exceptional example of the British belt-fed machine gun that helped win both World Wars (and many movies). Corrugated steel water jacket. Includes an exceptional example of the MK.IV brass tripod mount, see photos, with matching serial numbers on the Cradle and the Tripod Base. One of the included accessories is an original wood Transit Case. Most Transit Cases were made to house both the Vickers and the Lewis Gun. Uniquely, this Transit Case was made only for the Vickers machinegun. Also, it has excellent felt on the top of the Case; this is missing from most Transit Cases.

A uniquely original CZ 805 BREN A2 assault rifle replica made under full license by ?eská zbrojovka a.s. by ASG. The receiver was made from metal, similarly to mounting rails, fire mode selector plate and external barrel. The lower part of the receiver consisting of a pistol grip and a magazine socket made from very elastic polymer with an interesting, rough texture. Similar case concerns the stock and the stock slide. In order to manufacture elements that join the replica, such as pins, screws as well as the flash hider or the shell ejection window cover, the manufacturer has used steel, which is always a nice looking addition. The replica contains a gearbox V3 with a reinforced metal skeleton that conceals a polycarbonate piston and its perforated head (during air compression, a seal is pressed against the sides of the piston, which results in its better tightness).Steel gears are mounted on 7 mm bearings. Parts of the entire construction fit very well together and the fact that it is a gearbox V3 allows the user to rest easily and not to worry about the availability of parts or their compatibility. ITEM INFO CATEGORY: Machine Guns TYPE: Machine guns BRAND: CZ MODEL: BREN A2 CALIBER: 5.56mm TECH SPECS CAPACITY: 30 WEIGHT: 45 MATERIAL: Black SIGHT: Fixed PURPOSE: MACHINE GUNS