CZ 805 BREN A2 10.9 INCH POST SAMPLE MACHINE GUN

The Catco Sterling 9mm SMG submachine gun is constructed entirely of steel and plastic and has a shoulder stock, which folds underneath the weapon. There is an adjustable rear sight, which can be flipped between 100 and 200-yard settings. Although of conventional blowback design firing from an open bolt, there are some unusual features: for example, the bolt has helical grooves cut into the surface to remove dirt and fouling from the inside of the receiver to increase reliability. There are two concentric recoil springs that cycle the bolt, as opposed to the single spring arrangement used by many other SMG designs. This double-spring arrangement significantly reduces “bolt-bounce” when cartridges are chambered, resulting in better obturation, smoother recoil, and increased accuracy. Additionally, the Sterling uses a much-improved (over the Sten) 34-round curved double-column feed box magazine, which is inserted into the left side of the receiver. The magazine follower, which pushes the cartridges into the feed port, is equipped with rollers to reduce friction. The bolt feeds ammunition alternately from the top and bottom of the magazine lips, and its fixed firing pin is designed so that it does not line up with the primer in the cartridge until the cartridge has entered the chamber. The Sterling employs a degree of what is known as Advanced Primer Ignition, in that the cartridge is fired while the bolt is still moving forward, a fraction of a second before the round is fully chambered. The firing of the round thus not only sends the bullet flying down the barrel but simultaneously resists the forward’s movement of the bolt. By this means it is possible to employ a lighter bolt than if the cartridge was fired after the bolt had already stopped, as in simple blowback, since the energy of the expanding gases would then only have to overcome the bolt’s static inertia (plus spring resistance) to push it back again and cycle the weapon; whereas in this arrangement some of this energy is used up in counteracting the bolt’s forwards momentum as well, and thus the bolt does not have to be so massive. The lighter bolt makes not only for a lighter gun, but a more controllable one since there is less mass moving to and fro within it as it fires. The suppressed version of the Sterling (L34A1/Mk.5) was developed for covert operations. This version uses a ported barrel surrounded by a cylinder with expansion chambers. The Australian and New Zealand SAS regiments used the suppressed version of the Sterling during the Vietnam War. It is notable for having been used by both Argentinian and British Special Forces during the Falklands War. A Sterling was used by Libyan agents to kill WPC Yvonne Fletcher outside the Libyan Embassy in London, which sparked the 1984 siege of the building. The Sterling has a reputation for excellent reliability under adverse conditions and, even though it fires from an open bolt, has good accuracy. With some practice, it is very accurate when fired in short bursts. While it has been reported that the weapon poses no problems for left-handed users to operate, it is not recommended without the wearing of ballistic eye protection. The path of the ejected cartridge cases is slightly down and backward, so mild burns can occasionally be incurred by left-handed shooters. A bayonet of a similar design as that for the L1A1 Self-Loading Rifle was produced and issued in British Army service but was rarely employed except for ceremonial duties. Both bayonets were derived from the version issued with the Rifle No. 5 Mk I “Jungle Carbine”, the main difference being a smaller ring on the SLR bayonet to fit the rifle’s muzzle. When mounted, the Sterling bayonet was offset to the left of the weapon’s vertical line, which gave a more natural balance when used for bayonet-fighting. For a right-handed shooter, the correct position for the left hand while firing is on the ventilated barrel-casing, but not on the magazine, as the pressure from holding the magazine can increase the risk of stoppages, and a loose magazine can lead to dropping the weapon. The barrel-casing hold provides greater control of the weapon, so the right hand can intermittently be used for other tasks. A semi-circular protrusion on the right-hand side of the weapon, approximately two inches from the muzzle, serves to prevent the supporting hand from moving too far forward and over the muzzle.

The M1919 Browning was an American general purpose machine gun designed in 1919 by John Browning, as an air-cooled development of the earlier M1917 Browning. It was a belt fed machine gun, usually used mounted on a bipod or tripod. During World War II, it fired .30 caliber rounds, and had a rate of fire of around 500 rounds per minute, with an effective range of over a kilometer. It was used mostly by American forces, but also to many other Allied nations. The M1919 Browning is a .30 caliber medium machine gun that was used during the 20th century. It was used as a light infantry, mounted, aircraft, and anti-aircraft machine gun by the U.S. and many other countries, especially during World War II, the Korean War, and the Vietnam War. Although it was replaced by newer designs, it remained in many NATO countries for much longer. Caliber: .30-06 M2 Type: Fully-Automatic Category: Belt-fed/Medium Machine Gun Origin: United States Capacity: 20, 40 and 100-round belts

The Beretta BM59 Mk. IV SAW (squad-automatic-weapon) version, with its 44.48-inch overall length, a pistol grip and a heavy bipod, was also produced for export to Nigeria. Each of these variants of the BM59 featured a distinctive “tri-compensator”—a device combining a bayonet lug, a grenade launcher and a recoil compensator/flash suppressor in a single unit. The Beretta BM59 was a success as a military weapon and was used not just by Italy and Nigeria (the latter well into the 1990s), but also Algeria, Morocco, Ethiopia, Indonesia, Libya, Somalia and Argentina. In addition, the design was popular as a firearm for the civilian market. During the 1980s, two semi-automatic only versions of the BM59 were sold in the USA: the BM62 without “tri-compensator” and the BM69 with “tri-compensator” and bipod. Though they may not be abundant in number, the BM59/BM62/BM69 family of firearms provides an example of the way the spirit of John Garand reached through to the end of the 20th century. The military history of John Garand’s legendary semi-automatic rifle is typically situated in the Second World War and through the Korean War. Even though it lived on through the mid-’50s in National Guard, reserve and training units, the M1’s U.S. service history was over by that time. But, the spirit of John Garand extended beyond the M1 with the M14’s adoption, and it also stretched through to the end of the 1980s in foreign military service, thanks to the development of another rifle that modified some of the basic elements of the M1’s design to become the Fucile Automatico Leggero Beretta BM59 battle rifle. In 1949, Italy joined the North Atlantic Treaty Organization (NATO), and the following year it began obtaining M1 rifles from the U.S.A. through foreign military sales—more than 100,000 of them. But, by the mid-50s the Garand was a bit of a dated design in need of modernization. Battle rifles of that era had developed toward a specific group of features—lightweight, selective-fire, magazine-fed and chambered for the new 7.62 NATO cartridge—and the M1 needed work in every category in order to conform to that standard. Toward that end, an engineer at Beretta named Domenico Salza took on the mission of improving John Garand’s masterpiece, resulting in the Beretta BM59.

Brand new in box; unfired, DPMS Panther Arms LR-308 Oracle. AR-10 variants have long held an important place on the battlefield as special-purpose rifles for designated marksmen. Now DPMS Panther Arms has been one of the manufacturers leading a new resurgence in the tactical use of the 7.62X51 NATO round with its Long Range 308 line. ITEM INFO CATEGORY: Machine Guns TYPE: Semi-Automatic Rilfes BRAND: DPMS MODEL: Oracle CALIBER: 5.56mm NATO TECH SPECS CAPACITY: 30-39 WEIGHT: 45 MATERIAL: Black SIGHT: Fixed PURPOSE: Semi Auto Rifle

Brand new in box CZ Bren A2 post sample machine gun in 5.56mm. This is a 4 position 0-1-2-full. This is just like a FN Scar 16-17 but has 4 position! This comes one mag. This comes with a 30 day warranty

Pre-May Sales Sample in Excellent Condition in the box with a factory original manual and magazine. F25510 Please note: This is a restricted Pre-May Sales Sample only available to FFL & SOT Dealers. In stock in our vault and ready for eForm transfer.

This auction is for a new in box Kriss Vector 45 ACP sub machine gun with threaded barrel. This has a 4 position selector 0-1-2 round burst-full auto. Comes with 1 folding stock plus 2 new Glock factory 45 25 round mags. This also comes with a 30 day warranty! ITEM INFO CATEGORY: Machine Guns TYPE: sub-machine gun BRAND: KRISS MODEL: KRISS Vector CALIBER: 45 ACP TECH SPECS CAPACITY: 30 WEIGHT: 94 MATERIAL: Black SIGHT: PURPOSE: sub-machine gun

FNH USA FS2000 Tactical Semi Automatic Carbine chambered in 5.56 NATO/.223 Remington with a 17.4? cold hammer forged barrel, 30 round magazine, fully ambidextrous green stock and folding emergency sights. Chambered in 5.56x45mm NATO/223 Remington, the FN FS2000 Tactical is a civilian legal, semi-auto only variant of the proven F2000 selective-fire bullpup carbine that offers an integrated MIL-STD 1913 top mounting rail and emergency backup folding sights. The FS2000 carbine is gas-operated and uses a rotating bolt lockup for reliability and greater accuracy. Its 17.44? cold hammer-forged MIL-SPEC barrel is fitted with a muzzle brake. Fired cases are ejected through a forward port away from the operator. The olive drab thumbhole polymer stock is ambidextrous. Includes one (1) 30 round magazine, owner’s manual and locking device. UPC ECOM00123237 Caliber 223 REM/5.56 NATO Finish OD GREEN Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 17 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

Zenith Z-5RS post dealer sample machine gun in 9mm. The Zenith/MKE is an HK LICENSED VARIANT of the famous HK 9MM machinegun and is a double push pin. This gun can take any and all Genuine H&K factory parts. Parts are 100% interchangeable without modification.Parts like mags stocks internals Etc. We have a Full auto converted unit in our shop and have put over 1500 rounds through it without a single jam or malfunction, 100% reliability is what you can expect............ MKE supplies 29 countries with Everything from Ammunition and Small Arms to Tanks. These guns are top Quality Firearms from the MKE Turkish Military Plant. This comes with a threaded 1/2x28 tri-lug barrel and full auto SEF Pack. 3-30 round mags and your choice of the following stocks A3 F stock, side folding or A2. Also comes with cleaning kit, Scope mount rail and sling. So if you always wanted an MP5 sub gun this is the one for you. This is made on Licensed H&K factory machinery to H&K Specs. The finish is exact H&K factory spec. HENSE IT IS AS CLOSE AS H&K AS YOU CAN GET!!!!!!!! We guarantee this to be free from defects for 5 years. Buy with confidence

Glock 19 conversion to a select fire machine gun. This gun is in stock ready for transfer! This gun has night sights and 4 Glock factory magazines 3 15 round mags and 1 33 round mag. This gun shoots like new and is super fast! We are giving a 1 year warranty with this gun! This is a Marcum Firearms build.

Ive got one of the first versions of Clayco Underfolder AK-47/s 7.62×39 ever imported. Min Shan factory underfolder in 7.62×39. For sale or trade. In great shape, lightly used. I only put about 70 rounds through it. Outer cosmetic appearance is very good. numbered parts all match of course. Comes with Chinese sling pictured, 1 chinese flatback mag and a nice condition russian bakelite mag Mainly interested in trading at this time, will sell for 28000 or trade, no lowballers its highly unlikely you will find these for much cheaper ever again, Will sell clayco for 28000 plus transfer cost or shipping.

A uniquely original CZ 805 BREN A2 assault rifle replica made under full license by ?eská zbrojovka a.s. by ASG. The receiver was made from metal, similarly to mounting rails, fire mode selector plate and external barrel. The lower part of the receiver consisting of a pistol grip and a magazine socket made from very elastic polymer with an interesting, rough texture. Similar case concerns the stock and the stock slide. In order to manufacture elements that join the replica, such as pins, screws as well as the flash hider or the shell ejection window cover, the manufacturer has used steel, which is always a nice looking addition. The replica contains a gearbox V3 with a reinforced metal skeleton that conceals a polycarbonate piston and its perforated head (during air compression, a seal is pressed against the sides of the piston, which results in its better tightness).Steel gears are mounted on 7 mm bearings. Parts of the entire construction fit very well together and the fact that it is a gearbox V3 allows the user to rest easily and not to worry about the availability of parts or their compatibility. ITEM INFO CATEGORY: Machine Guns TYPE: Machine guns BRAND: CZ MODEL: BREN A2 CALIBER: 5.56mm TECH SPECS CAPACITY: 30 WEIGHT: 45 MATERIAL: Black SIGHT: Fixed PURPOSE: MACHINE GUNS