FN FS2000 223 556 30RD 16

New in box SilencerCo SAKER 556 5.56 Suppressor. Silencer comes with the factory box, owners manual, tool and a soft case. This silencer does not come with the MAAD mount. · Caliber: 5.56 · Length: 6.758" · Diameter: 1.5" · Weight: 18.2 oz. · Material: Stellite with Hoplon Baffle · Finish: Black Oxide · Mount: Not included

A tactical workhorse, the AR10TAC20 is the perfect tool for duty and defense. All Armalite Tactical Series rifles come equipped with MAGPUL MBUS flip-up sights and MOE+ pistol grips. The dual-purpose flash hiding compensator tames recoil while reducing signature. The sturdy 15” tactical Key-Mod handguard provides ample hand placement and a full-length MIL-STD 1913 12 o’clock rail for sights and accessories. An adjustable gas block also allows the rifle to be individually tuned for optimal performance for your choice of ammunition and/or suppressor use. Click to open expanded view Attachment Method: Key-Mod Product Line: AR-10 Product Category: Tactical Caliber: .308 Win | 7.62×51 Barrel: HB, SST Triple Lapped Barrel Length: 20? Twist Rate: 1:10 RH Muzzle Device: Flash Suppressing Compensator Front Sight Base: Full-Length MIL-STD 1913 Rail Handguard: 15? Free-Floating Tactical Stock: MBA-1 Light-Weight Precision, Adjustable Upper Receiver: Forged Flat-Top with MIL-STD 1913 Rail, 7075-T6 Aluminum Lower Receiver: Forged 7075-T6 Aluminum Safety: Ambidextrous Trigger: Two-Stage Precision Charging Handle: “Raptor” Ambidextrous Finish: Hard Anodized Aluminum, Manganese Phosphated Steel Length: 42.3? Collapsed | 43.3? Extended Included: One 25-Round Magpul PMAG, Magpul MBUS, Owner’s Manual

Zenith Z-5RS post dealer sample machine gun in 9mm. The Zenith/MKE is an HK LICENSED VARIANT of the famous HK 9MM machinegun and is a double push pin. This gun can take any and all Genuine H&K factory parts. Parts are 100% interchangeable without modification.Parts like mags stocks internals Etc. We have a Full auto converted unit in our shop and have put over 1500 rounds through it without a single jam or malfunction, 100% reliability is what you can expect............ MKE supplies 29 countries with Everything from Ammunition and Small Arms to Tanks. These guns are top Quality Firearms from the MKE Turkish Military Plant. This comes with a threaded 1/2x28 tri-lug barrel and full auto SEF Pack. 3-30 round mags and your choice of the following stocks A3 F stock, side folding or A2. Also comes with cleaning kit, Scope mount rail and sling. So if you always wanted an MP5 sub gun this is the one for you. This is made on Licensed H&K factory machinery to H&K Specs. The finish is exact H&K factory spec. HENSE IT IS AS CLOSE AS H&K AS YOU CAN GET!!!!!!!! We guarantee this to be free from defects for 5 years. Buy with confidence

The Bushmaster XM15E2 – M-16 – 5.56x45mm – 16 is in perfect working condition

This auction is for a new in box Kriss Vector 45 ACP sub machine gun with threaded barrel. This has a 4 position selector 0-1-2 round burst-full auto. Comes with 1 folding stock plus 2 new Glock factory 45 25 round mags. This also comes with a 30 day warranty! ITEM INFO CATEGORY: Machine Guns TYPE: sub-machine gun BRAND: KRISS MODEL: KRISS Vector CALIBER: 45 ACP TECH SPECS CAPACITY: 30 WEIGHT: 94 MATERIAL: Black SIGHT: PURPOSE: sub-machine gun

This Chester County Armory listing is for a rarely seen P.A.W.S. Inc. Model ZX-7 .45acp transferable sub machine gun. Also known as "The American Sterling", this rare and uniquely US-made ZX-7 serves as a fascinating homage to the venerable British Sterling L2A3 sub machine gun. Always enamored with the craftsmanship and design of the British Sterling, the ZX-7 was built and created by gunsmith and Class 2 manufacturer Bob Imel at his company, Police Automatic Weapons Services, in Salem, OR in the mid 1970's. Built from the ground up, Mr. Imel re-created the beautiful lines and wonderful reliability of the L2A3, but with his own unique redesigns and improvements, to make it a truly Americanized version. Of course, the improvements started first and foremost, by offering it in the American of all American calibers...the .45ACP. For an in-depth analysis of the differences between the British Sterling L2A3 and Bob Imel's creation, check out Ian at Forgotten Weapons and his wonderful video on the subject: https://www.youtube.com/watch?v=VKk9Ss6RJ80 Utilizing easy-to-come-by M3 Grease gun magazines, the ZX-7 functions amazingly well, with a cyclic rate of around 750 RPMS, making it markedly faster than the M3 Grease Gun and more inline with a 1928 Thompson. Robust and controllable, the ZX-7 in .45acp was only made in very small numbers by P.A.W.S. as a transferable SMG. Some counts have them as low as 20 or 25, as the 9mm version (the P.A.W.S. ZX-5), was made in significantly greater quantities. This specific model is serial number 20. This transferable sub machine gun is in excellent mechanical, as well as cosmetic condition. The internals do not note any wear and the bore is bright and shiny with crisp and clean rifling. The fire controls are in excellent condition, with solid placements on the selector controls in both semi-automatic and full-automatic modes, as well as a positive safety lockup. The original crinkle-style finish employed by Mr. Imel is in excellent condition, with only a few minor marks on the entire weapon. The metalwork is excellent, with no dings, dents, gouges, cracks, etc.. Two 30rd magazines are included with the purchase. This rare and unique weapon is currently on a Form 3 for easy transfer, with "P.A.W.S. Inc" listed as the manufacturer and "ZX7" listed as the model. FOR MORE INFORMATION ON THIS LISTING CONTACT OUR WEBSITE AT OUTDOORSARMORY.COM

The Catco Sterling 9mm SMG submachine gun is constructed entirely of steel and plastic and has a shoulder stock, which folds underneath the weapon. There is an adjustable rear sight, which can be flipped between 100 and 200-yard settings. Although of conventional blowback design firing from an open bolt, there are some unusual features: for example, the bolt has helical grooves cut into the surface to remove dirt and fouling from the inside of the receiver to increase reliability. There are two concentric recoil springs that cycle the bolt, as opposed to the single spring arrangement used by many other SMG designs. This double-spring arrangement significantly reduces “bolt-bounce” when cartridges are chambered, resulting in better obturation, smoother recoil, and increased accuracy. Additionally, the Sterling uses a much-improved (over the Sten) 34-round curved double-column feed box magazine, which is inserted into the left side of the receiver. The magazine follower, which pushes the cartridges into the feed port, is equipped with rollers to reduce friction. The bolt feeds ammunition alternately from the top and bottom of the magazine lips, and its fixed firing pin is designed so that it does not line up with the primer in the cartridge until the cartridge has entered the chamber. The Sterling employs a degree of what is known as Advanced Primer Ignition, in that the cartridge is fired while the bolt is still moving forward, a fraction of a second before the round is fully chambered. The firing of the round thus not only sends the bullet flying down the barrel but simultaneously resists the forward’s movement of the bolt. By this means it is possible to employ a lighter bolt than if the cartridge was fired after the bolt had already stopped, as in simple blowback, since the energy of the expanding gases would then only have to overcome the bolt’s static inertia (plus spring resistance) to push it back again and cycle the weapon; whereas in this arrangement some of this energy is used up in counteracting the bolt’s forwards momentum as well, and thus the bolt does not have to be so massive. The lighter bolt makes not only for a lighter gun, but a more controllable one since there is less mass moving to and fro within it as it fires. The suppressed version of the Sterling (L34A1/Mk.5) was developed for covert operations. This version uses a ported barrel surrounded by a cylinder with expansion chambers. The Australian and New Zealand SAS regiments used the suppressed version of the Sterling during the Vietnam War. It is notable for having been used by both Argentinian and British Special Forces during the Falklands War. A Sterling was used by Libyan agents to kill WPC Yvonne Fletcher outside the Libyan Embassy in London, which sparked the 1984 siege of the building. The Sterling has a reputation for excellent reliability under adverse conditions and, even though it fires from an open bolt, has good accuracy. With some practice, it is very accurate when fired in short bursts. While it has been reported that the weapon poses no problems for left-handed users to operate, it is not recommended without the wearing of ballistic eye protection. The path of the ejected cartridge cases is slightly down and backward, so mild burns can occasionally be incurred by left-handed shooters. A bayonet of a similar design as that for the L1A1 Self-Loading Rifle was produced and issued in British Army service but was rarely employed except for ceremonial duties. Both bayonets were derived from the version issued with the Rifle No. 5 Mk I “Jungle Carbine”, the main difference being a smaller ring on the SLR bayonet to fit the rifle’s muzzle. When mounted, the Sterling bayonet was offset to the left of the weapon’s vertical line, which gave a more natural balance when used for bayonet-fighting. For a right-handed shooter, the correct position for the left hand while firing is on the ventilated barrel-casing, but not on the magazine, as the pressure from holding the magazine can increase the risk of stoppages, and a loose magazine can lead to dropping the weapon. The barrel-casing hold provides greater control of the weapon, so the right hand can intermittently be used for other tasks. A semi-circular protrusion on the right-hand side of the weapon, approximately two inches from the muzzle, serves to prevent the supporting hand from moving too far forward and over the muzzle.

The Beretta BM59 Mk. IV SAW (squad-automatic-weapon) version, with its 44.48-inch overall length, a pistol grip and a heavy bipod, was also produced for export to Nigeria. Each of these variants of the BM59 featured a distinctive “tri-compensator”—a device combining a bayonet lug, a grenade launcher and a recoil compensator/flash suppressor in a single unit. The Beretta BM59 was a success as a military weapon and was used not just by Italy and Nigeria (the latter well into the 1990s), but also Algeria, Morocco, Ethiopia, Indonesia, Libya, Somalia and Argentina. In addition, the design was popular as a firearm for the civilian market. During the 1980s, two semi-automatic only versions of the BM59 were sold in the USA: the BM62 without “tri-compensator” and the BM69 with “tri-compensator” and bipod. Though they may not be abundant in number, the BM59/BM62/BM69 family of firearms provides an example of the way the spirit of John Garand reached through to the end of the 20th century. The military history of John Garand’s legendary semi-automatic rifle is typically situated in the Second World War and through the Korean War. Even though it lived on through the mid-’50s in National Guard, reserve and training units, the M1’s U.S. service history was over by that time. But, the spirit of John Garand extended beyond the M1 with the M14’s adoption, and it also stretched through to the end of the 1980s in foreign military service, thanks to the development of another rifle that modified some of the basic elements of the M1’s design to become the Fucile Automatico Leggero Beretta BM59 battle rifle. In 1949, Italy joined the North Atlantic Treaty Organization (NATO), and the following year it began obtaining M1 rifles from the U.S.A. through foreign military sales—more than 100,000 of them. But, by the mid-50s the Garand was a bit of a dated design in need of modernization. Battle rifles of that era had developed toward a specific group of features—lightweight, selective-fire, magazine-fed and chambered for the new 7.62 NATO cartridge—and the M1 needed work in every category in order to conform to that standard. Toward that end, an engineer at Beretta named Domenico Salza took on the mission of improving John Garand’s masterpiece, resulting in the Beretta BM59.

The innovative minds over at AGM pulled all stops to produce a truly authentic WWII era MG42 airsoft replica. Originally the MG42 was designed in Nazi Germany to be a lost cost alternative to the MG34 and was used exclusively by the Wehrmacht and Waffen-SS units during the second half of World War II. Due to its highest rate of fire and long lasting reliability, the MG42 was adopted by multiple armed forces at the end of the war. This full size replica from AGM is constructed fully from steel to match the feel and integrity of its 7.62mm brother. Alongside full metal externals, real wood is used for the ergonomically designed pistol grip and removable fixed stock, which houses the included battery. A functional mock charging handle adds to the realism of this airsoft replica. Utilize the adjustable hop-up located under the steel vented handguard to account for various target range and BB weight, for the most accurate shot every time. Players can use the adjustable flip-up front and rear sights to quickly and accurately zero in their targets without the need for an additional optic accessory. An included full metal bipod assists in keeping the MG42 stable when laying down cover fire, and can be folded against the rifle for easy transportation when changing positions. To match the rugged externals, AGM outfitted this AEG with a custom full metal gearbox; easily withstanding high energy output from LiPO batteries. Although a truly unique gearbox is used for the MG42, it is still fully upgradable with Version 2 aftermarket internals. The MG42 can lay down an impressive rate of fire, so AGM included a 2,500 round drum magazine to fully maximize this guns full potential. The drum magazine is designed to fit snug against the rifle to retain a low-profile, and features auto-winding technology saving you precious time during reloads. AGM made sure the MG42 comes skirmish ready by including a 8.4v 1100mAh NiMH battery and standard wall charger with every package. This heavyweight replica is perfect for authentic MIL-SIM events and reenactments, covering all bases for airsoft enthusiasts. The new Maschinengewehr MG42 Full Metal AEG from AGM is a truly one of a kind machine that is sure to resonate with airsoft enthusiasts of all play styles. Features: Color: Black / Real Wood 420 FPS (0.20g BB) Magazine: 2500rd Weight: 16lbs. Inner Barrel: 600mm 8.4v 1100mAh NiMH Battery & Wall Charger INCLUDED Full Metal Custom Gearbox (Version 2 Compatible) Stamped Steel Receiver & Vented Handguard Genuine Wood Pistol Grip Panels & Stock Functional Mock Charging Handle Removable Steel Folding Bipod Auto-Winding 2,500 Round Drum Magazine (5x AA Batteries NOT INCLUDED) Adjustable Flip-up Front & Rear Sights Full Size WWII Replica Adjustable Hop-up Safe / Full Auto

FNH USA FS2000 Tactical Semi Automatic Carbine chambered in 5.56 NATO/.223 Remington with a 17.4? cold hammer forged barrel, 30 round magazine, fully ambidextrous green stock and folding emergency sights. Chambered in 5.56x45mm NATO/223 Remington, the FN FS2000 Tactical is a civilian legal, semi-auto only variant of the proven F2000 selective-fire bullpup carbine that offers an integrated MIL-STD 1913 top mounting rail and emergency backup folding sights. The FS2000 carbine is gas-operated and uses a rotating bolt lockup for reliability and greater accuracy. Its 17.44? cold hammer-forged MIL-SPEC barrel is fitted with a muzzle brake. Fired cases are ejected through a forward port away from the operator. The olive drab thumbhole polymer stock is ambidextrous. Includes one (1) 30 round magazine, owner’s manual and locking device. UPC ECOM00123237 Caliber 223 REM/5.56 NATO Finish OD GREEN Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 17 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

The M1919 Browning was an American general purpose machine gun designed in 1919 by John Browning, as an air-cooled development of the earlier M1917 Browning. It was a belt fed machine gun, usually used mounted on a bipod or tripod. During World War II, it fired .30 caliber rounds, and had a rate of fire of around 500 rounds per minute, with an effective range of over a kilometer. It was used mostly by American forces, but also to many other Allied nations. The M1919 Browning is a .30 caliber medium machine gun that was used during the 20th century. It was used as a light infantry, mounted, aircraft, and anti-aircraft machine gun by the U.S. and many other countries, especially during World War II, the Korean War, and the Vietnam War. Although it was replaced by newer designs, it remained in many NATO countries for much longer. Caliber: .30-06 M2 Type: Fully-Automatic Category: Belt-fed/Medium Machine Gun Origin: United States Capacity: 20, 40 and 100-round belts

Hk MP5-40 sear host built by Jayson of Investment Grade Firearms. This was built using a brand new demilled German Hk MP5-40,mp5 for sale and a Special Weapons receiver. The original gun was new, it was a crime to have to cut the original receiver up, but the kit of genuine German parts was a real catch. The SW receiver was the final perfected model. I have built several of these guns with Jayson, and they have been in perfect compliance. As this gun was built from a brand new gun, it was my favorite. This gun was tested by Jayson in full-auto before it was finished; it ran perfect and it is in perfect condition.