INGRAM M10A1 MAC 10 MACHINE GUN IN 9MM

FNH USA FS2000 Tactical Semi Automatic Carbine chambered in 5.56 NATO/.223 Remington with a 17.4? cold hammer forged barrel, 30 round magazine, fully ambidextrous green stock and folding emergency sights. Chambered in 5.56x45mm NATO/223 Remington, the FN FS2000 Tactical is a civilian legal, semi-auto only variant of the proven F2000 selective-fire bullpup carbine that offers an integrated MIL-STD 1913 top mounting rail and emergency backup folding sights. The FS2000 carbine is gas-operated and uses a rotating bolt lockup for reliability and greater accuracy. Its 17.44? cold hammer-forged MIL-SPEC barrel is fitted with a muzzle brake. Fired cases are ejected through a forward port away from the operator. The olive drab thumbhole polymer stock is ambidextrous. Includes one (1) 30 round magazine, owner’s manual and locking device. UPC ECOM00123237 Caliber 223 REM/5.56 NATO Finish OD GREEN Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 17 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

The Catco Sterling 9mm SMG submachine gun is constructed entirely of steel and plastic and has a shoulder stock, which folds underneath the weapon. There is an adjustable rear sight, which can be flipped between 100 and 200-yard settings. Although of conventional blowback design firing from an open bolt, there are some unusual features: for example, the bolt has helical grooves cut into the surface to remove dirt and fouling from the inside of the receiver to increase reliability. There are two concentric recoil springs that cycle the bolt, as opposed to the single spring arrangement used by many other SMG designs. This double-spring arrangement significantly reduces “bolt-bounce” when cartridges are chambered, resulting in better obturation, smoother recoil, and increased accuracy. Additionally, the Sterling uses a much-improved (over the Sten) 34-round curved double-column feed box magazine, which is inserted into the left side of the receiver. The magazine follower, which pushes the cartridges into the feed port, is equipped with rollers to reduce friction. The bolt feeds ammunition alternately from the top and bottom of the magazine lips, and its fixed firing pin is designed so that it does not line up with the primer in the cartridge until the cartridge has entered the chamber. The Sterling employs a degree of what is known as Advanced Primer Ignition, in that the cartridge is fired while the bolt is still moving forward, a fraction of a second before the round is fully chambered. The firing of the round thus not only sends the bullet flying down the barrel but simultaneously resists the forward’s movement of the bolt. By this means it is possible to employ a lighter bolt than if the cartridge was fired after the bolt had already stopped, as in simple blowback, since the energy of the expanding gases would then only have to overcome the bolt’s static inertia (plus spring resistance) to push it back again and cycle the weapon; whereas in this arrangement some of this energy is used up in counteracting the bolt’s forwards momentum as well, and thus the bolt does not have to be so massive. The lighter bolt makes not only for a lighter gun, but a more controllable one since there is less mass moving to and fro within it as it fires. The suppressed version of the Sterling (L34A1/Mk.5) was developed for covert operations. This version uses a ported barrel surrounded by a cylinder with expansion chambers. The Australian and New Zealand SAS regiments used the suppressed version of the Sterling during the Vietnam War. It is notable for having been used by both Argentinian and British Special Forces during the Falklands War. A Sterling was used by Libyan agents to kill WPC Yvonne Fletcher outside the Libyan Embassy in London, which sparked the 1984 siege of the building. The Sterling has a reputation for excellent reliability under adverse conditions and, even though it fires from an open bolt, has good accuracy. With some practice, it is very accurate when fired in short bursts. While it has been reported that the weapon poses no problems for left-handed users to operate, it is not recommended without the wearing of ballistic eye protection. The path of the ejected cartridge cases is slightly down and backward, so mild burns can occasionally be incurred by left-handed shooters. A bayonet of a similar design as that for the L1A1 Self-Loading Rifle was produced and issued in British Army service but was rarely employed except for ceremonial duties. Both bayonets were derived from the version issued with the Rifle No. 5 Mk I “Jungle Carbine”, the main difference being a smaller ring on the SLR bayonet to fit the rifle’s muzzle. When mounted, the Sterling bayonet was offset to the left of the weapon’s vertical line, which gave a more natural balance when used for bayonet-fighting. For a right-handed shooter, the correct position for the left hand while firing is on the ventilated barrel-casing, but not on the magazine, as the pressure from holding the magazine can increase the risk of stoppages, and a loose magazine can lead to dropping the weapon. The barrel-casing hold provides greater control of the weapon, so the right hand can intermittently be used for other tasks. A semi-circular protrusion on the right-hand side of the weapon, approximately two inches from the muzzle, serves to prevent the supporting hand from moving too far forward and over the muzzle.

The M1919 Browning was an American general purpose machine gun designed in 1919 by John Browning, as an air-cooled development of the earlier M1917 Browning. It was a belt fed machine gun, usually used mounted on a bipod or tripod. During World War II, it fired .30 caliber rounds, and had a rate of fire of around 500 rounds per minute, with an effective range of over a kilometer. It was used mostly by American forces, but also to many other Allied nations. The M1919 Browning is a .30 caliber medium machine gun that was used during the 20th century. It was used as a light infantry, mounted, aircraft, and anti-aircraft machine gun by the U.S. and many other countries, especially during World War II, the Korean War, and the Vietnam War. Although it was replaced by newer designs, it remained in many NATO countries for much longer. Caliber: .30-06 M2 Type: Fully-Automatic Category: Belt-fed/Medium Machine Gun Origin: United States Capacity: 20, 40 and 100-round belts

This is an Ingram, Full Automatic, transferable, M10A1 9mm machine gun. Great condition. The 9mm M10A1 is has the lowest rate of fire of all the MACs…making it very easy to control. Since it fires 9mm it is also very cheap to shoot. Comes with original cobray folding stock. Comes with fake silencer, carrying case, and 4 magazines. The handle is broken on the carrying case but otherwise it is a nice case. Will be shipped to your FFL fully insured. This gun is currently inbound on a form 4 from Texas. Any questions please ask. ITEM INFO CATEGORY: Machine Guns TYPE: Machine guns BRAND: Military Armament Corp. MODEL: M10A1 CALIBER: 9mm TECH SPECS CAPACITY: 30 WEIGHT: 31 MATERIAL: Black SIGHT: Fixed PURPOSE: MACHINE GUNS

A uniquely original CZ 805 BREN A2 assault rifle replica made under full license by ?eská zbrojovka a.s. by ASG. The receiver was made from metal, similarly to mounting rails, fire mode selector plate and external barrel. The lower part of the receiver consisting of a pistol grip and a magazine socket made from very elastic polymer with an interesting, rough texture. Similar case concerns the stock and the stock slide. In order to manufacture elements that join the replica, such as pins, screws as well as the flash hider or the shell ejection window cover, the manufacturer has used steel, which is always a nice looking addition. The replica contains a gearbox V3 with a reinforced metal skeleton that conceals a polycarbonate piston and its perforated head (during air compression, a seal is pressed against the sides of the piston, which results in its better tightness).Steel gears are mounted on 7 mm bearings. Parts of the entire construction fit very well together and the fact that it is a gearbox V3 allows the user to rest easily and not to worry about the availability of parts or their compatibility. ITEM INFO CATEGORY: Machine Guns TYPE: Machine guns BRAND: CZ MODEL: BREN A2 CALIBER: 5.56mm TECH SPECS CAPACITY: 30 WEIGHT: 45 MATERIAL: Black SIGHT: Fixed PURPOSE: MACHINE GUNS

This Chester County Armory listing is for an extremely rare, fully select fire version of a Heckler & Koch MR223A3 5.56mm NATO transferable machine gun. This model started it's life being imported into the United States as a rare 14.5" HK semi-automatic pistol. The RAL8000 finish was done by Heckler and Koch, themselves, and is not an aftermarket finish. A transferable SWD Lightning Link was then installed by famed Lightning Link specialist John Ciszek of JEC Enterprises. John is known throughout the industry as "The Lightning Link Guy" because of extraordinary work making these custom setups run absolutely flawlessly! His work on this gun is no exception, as it is now a fully select fire setup that runs just like it came from the HK factory that way! This incredible specimen also features the factory correct HK factory front and rear back up iron sights. It also features the correct RAL8000 matching HK furniture and comes with a current generation HK Gen 3 30rd magazine, also in the RAL8000 finish. The host pistol is being offered as new condition, having only been fired by JEC Enterprises during the installation and testing of the SWD Lightning Link. It does note some minor handling-type marks on the exposed section of the barrel in the parkerizaton (see photos) however this was the condition in which it was originally imported. This weapon setup is only being offered for sale complete, and will not be separated by us. This NFA registered SWD Lightning Link is fully transferable, currently on a Form 3. The HK MR223 acting as a host gun will transfer as a standard Title One pistol.

New post sample Century Arms AK-47 Rifle WASR 10 in 7.62x39. This comes with a 60 day warranty and 1 30 round P-Mag!----Features •Full-Automatic Variant of the AK-47 -------------•Laminate Stock •Hard Chrome-Lined, Hammer-Forged Barrel •Side Mount Scope Rail •30-Round 7.62x39MM Magazine

Buy Jap 99 with original mag and scope online. Securely pay and receive Jap 99 with original mag and scope at your delivery location within 24 hours

1918A2, BAR Manufactured by NE Small Arms in Very Nice Condition 524402 Please note: This is a restricted Pre-May Sales Sample only available to FFL & SOT Dealers. In stock in our vault and ready for eForm transfer. Price includes S&H and Insurance. Florida residents are subject to Florida Sales tax.

The Beretta BM59 7,62x51mm caliber battle rifle was conceived after World War II and fielded ever since the 1960s in several variants as the standard service weapon system for the Italian Armed Forces. It was informally known among the Italian troops as the FAL ? an acronym for “Fucile Automatico Leggero“, or “Light Automatic Rifle”, despite having nothing in common with the Belgian rifle of the same name and despite all but “light”, standing at around 4,4 kilograms of weight without a full magazine. Conceived as a straightforward select-fire, magazine-fed .308/7.62mm modification of the M1 Garand rifle, the Beretta BM59 was conceptually old already back at the time of its introduction ? being a contemporary of much more modern battle and assault rifles such as the FN FAL, the Heckler & Koch G3, and the AKM; nonetheless, it served the Italian Armed Forces up until the 1990s, and many Italian gun enthusiasts who were in the military or did the national service remember it all too well. As the years went by, many companies tried to bring semi-automatic, civilian-grade variants of the BM59 to the market. Most of times they were rebuilt clones using components of scrapped BM59s and M1 Garand rifles, or modern clones; Beretta itself did manufacture a certain number of civilian-grade versions, dubbed the BM62, which are now highly collectible and very highly priced. The Beretta BM59 rifles as demilitarized by Nuova Jäger also pack some features that the previous civilian-grade variants didn’t come with: these include the original grenade launching muzzle device, also dubbing as a flash hider and sound suppressor, and a winter trigger pack conceived for alpine troops. Among the modifications required by law to make the BM59 rifles capable of semi-automatic fire only and non-reconvertible are several operations on the trigger group; the fire selector was blocked on the “Semi” position, and proof-marked as such; and the gas block has been modified so that it will not allow the launch of grenades. This meant that the original grenade sight ? which, when flipped up, automatically set the gas system to the “Grenade” position ? also had to go. All the Nuova Jäger’s BM59 rifles feature the original Beretta markings, which also refer to the year of manufacture. They all come with five-rounds magazines, but are compatible with original twenty rounds magazines.

This auction is for a new in box Kriss Vector 45 ACP sub machine gun with threaded barrel. This has a 4 position selector 0-1-2 round burst-full auto. Comes with 1 folding stock plus 2 new Glock factory 45 25 round mags. This also comes with a 30 day warranty! ITEM INFO CATEGORY: Machine Guns TYPE: sub-machine gun BRAND: KRISS MODEL: KRISS Vector CALIBER: 45 ACP TECH SPECS CAPACITY: 30 WEIGHT: 94 MATERIAL: Black SIGHT: PURPOSE: sub-machine gun

Ive got one of the first versions of Clayco Underfolder AK-47/s 7.62×39 ever imported. Min Shan factory underfolder in 7.62×39. For sale or trade. In great shape, lightly used. I only put about 70 rounds through it. Outer cosmetic appearance is very good. numbered parts all match of course. Original Dark green/black bake grip and handguard. Comes with Chinese sling pictured, 1 chinese flatback mag and a nice condition russian bakelite mag Mainly interested in trading at this time, will sell for 2800 or trade, no lowballers its highly unlikely you will find these for much cheaper ever again, Also have a milled mak90 386 (polytech factory) marked. with sporter furniture, angle cut reciever but is perfect candidate for several chinese variant conversions, includes sling and 1 flatback mag crossposted Will sell clayco for 2800 plus transfer cost or shipping. MAK90 for 1400 Located in Seattle, can meet a couple hours any direction