KEL-TEC SUB 2000 9MM GEN 2 USES GLOCK 17 MAGAZINES SUB 2000

AR-15 pistol is a classification that exists due to some silly American gun laws and definitions. An AR pistol cannot have a stock, but can have a bare and exposed buffer tube. Another no-no is a vertical grip, but an angled grip like the Magpul AFG is legal. Now of course nobody wants to run afoul of the Federal Government, so it’s imperative that you understand what makes an SBR an SBR, and what makes AR pistols legal. It may appear to be complicated and obfuscated but the defining characteristics are pretty straight forward if you know what you’re looking for. AR-15 pistols can have barrels as short as you want them to. Personally, I own an AR-15 pistol with a 7.5-inch barrel and, while it is ridiculous, it’s a lot of fun. Over the last few years, the popularity of AR-15 pistols has grown significantly. This growth is mostly tied to the advent of stabilizing braces. Stabilizing braces turned a gaudy, heavy, and awkward gun into a stable, comfortable-to-shoot weapon. Why Would I Want One? We won’t dive too deep into the NFA, but the section that concerns this article is the law that rifles must have 16-inch barrels, or else they are regulated under the NFA. So, if you wanted an AR-15 with a 7.5-inch barrel, you’d have to pay a tax stamp, ask for permission, and wait for 3 to 6 months for approval. Once approved you could then own an SBR. Or you could just buy an AR pistol and skip all that. There are a lot of other reasons you might want an AR pistol, besides just the tax stamp.

It’s a hoot to shoot for sure and maybe more so than my SP5 (just maybe). So trying out a few options and started farkling out the PDW. Starting out with the following: Rear Drum (thx to @ Indreams84) Magpul forend/handguard HS1 finger light (green laser). Had to dremel out a hole for HS1 laser to poke/emitt through. Worked out great. JMAC Brace 8” raised arm bar 1913 SigMech folder Cheekweld affixed to top of brace (holes are predrilled and threaded) Gearworks Tailhook MOD1C Also saw the B&T retractable stock at LGS as another option that I’m going to ponder on: Per the measurements it seems that when retracted with MAGPUL forend/handguard appears to be issue. It would appear to be an unfavorable check rest but guess one can adjust and get used to it. It would appear the small end, would not seat great in shoulder/pec area, but again guess you can find a good area to pocket it into and get used to it quickly. Appears to retract really nice and seems compact and extends easily, and seems like great lockup with very minor up/down flex, hopefully minimal rubbing along body frame. so will also soon consider the Vertical grip and will need to pay it visit at the LGS soon again while pending the process. The JMAC Brace Pros: It’s a Brace and cheek hold is really comfortable and supportive. if you wanted to add an RMR/Optic it’s adjustable to slide up and down via the pic-rail and sig mech. I ended up cutting out the foam and was able to fit in it’s folded condition. It’s tight and although does fully seat, it closes and works out fine. Let’s see your SP5K-PDW Stock or Brace here in order to see the various options out there for the PDW.

DPMS continues to provide you with quality firearms that you can trust for any popular shooting sports discipline. This particular Panther model features a set of forged aluminum upper and lower receivers which are standard throughout the industry as meeting the military specification. The crown jewel of this rifle is the 16? Lightweight FNC Melonite treated barrel. The Ferritic Nitrocarburizing is a hardening process which improves barrel performance over mil-spec chrome plating in terms of barrel longevity, corrosion resistance and accuracy. By diffusing carbon and nitrogen into the barrel steel rather than adding a layer of material (as is the case in traditional chrome plating) the LCAR barrel is more durable and corrosion resistant without negatively effecting accuracy. Specifications and Features: DPMS 5.56 LCAR AR-15 Semi Auto Rifle 60140 Direct Gas Impingement System Carbine Length Gas System 5.56 NATO (Accepts .223 Remington) 16? Lightweight FNC (Melonite) Treated Barrel 1:8? Twist Rate Threaded 1/2×28 Forged 7075-T6 Aluminum M4 Flat Top Upper Receiver Forged 7075-T6 Aluminum Lower Receiver Mil-Spec Buffer Tube 6 Position M4 Stock A2 Flash Hider Fixed Front Sight Base (F Marked) Magpul Flip Up Rear sight Synthetic Polymer Glacier Hand Guard 30 Round Magazine Accepts Standard Pattern AR-15 Magazines A2 Pistol Grip Standard Sling Loop Bayonet Lug Type III Hard Coat Anodized Upper/Lower Receiver Finish Overall Length 36.5? Overall Weight 6.4lbs Matte Black

rare NIB Colt LE6920 with . This gun is chambered in 5.56mm, 16" barrel, 1:7 twist. Gun comes with factory box, (2) Colt 20 round magazines, manual,

Maadi Griffin Model 89 in .50BMG. These kit guns are a great way to get in to the .50 caliber world for a reasonable price. This on has some handling marks and some dings in the finish but looks to be free of any mechanical defects. The bore is bright and shiny and has strong rifling. The gun is free of rust and any large dents or scratches. It is a single shot bolt action with a 37? in barrel. With the break installed and the bolt/butt pad in the overall length of the rifle is just under 49?. It wears a Bushnell Banner 6-18×50 scope and will ship in an aluminum hard case. Serial number is RAY5*. Buyer pays for shipping (48 states). This gun must be shipped to an FFL dealer for transfer, subject to all local laws. US sales only, no exports. ITEM INFO CATEGORY: Rifles TYPE: Bolt Action Rifles BRAND: Maddi Griffin MODEL: 89 CALIBER: 50 BMG TECH SPECS CAPACITY: Single shot WEIGHT: 23 MATERIAL: SIGHT: PURPOSE: Bolt Action Rifles

The ARX160 is a modern assault rifle of Italian origin. Development started in the early 2000’s for the Italian “Soldado Futuro” future soldier program. Design The design is a departure from Beretta’s previous AR 70/90 in being gas operated by means of a short stroke gas piston. Internally the weapon is made out of metal with the furniture being all plastics. A four position folding stock is standard. The design is modular as barrels can be swapped, the caliber could be changed and Picatinny rails allow mounting of accessories and optics. Firepower The ARX160 fires the 5.56x45mm NATO round from 30 round STANAG magazines. It is capable of semi-automatic fire and fully automatic fire at a 700 round per minute cyclic rate of fire. It is possible to mount the GLX160 under-barrel grenade launcher. Users The ARX160 has been bought in limited quantities by several users. It has been chosen as part of the the Italian “Soldado Futuro” future soldier program and may be acquired in quantity. Origin; Italy Type ; Assault rifle Entered service ; 2010 Status; In service Development ; 2000’s Developer ; Italy – Beretta Ulrich Zedrosser ; Production 2008 – present Producer ; Italy – Beretta Number produced Over 40.000 produced by 2015, production continues

Up for sale is an Excellent Condition Ultra Rare Wytwornia Broni Jacek Popinski Fox AK74 Polish 5.56 Semi Automatic rifle. This was custom built by Horse Shoe Firearms, LLC in Horse Shoe North Carolina. This kit is all factory new WBP fox with AK Builder 5.56 Barrel and Childers CG556 receiver. There is virtually no wear on this firearm as pictured and has been test fired for functionality. Includes one original 30rd clear smoke Polish 5.56 magazine as shown. UPC ECOM00170400 Caliber 5.56 NATO Finish BLACK Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16.25 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

Benelli R1 .300 Win Mag 20? Barrel and Bolt Assembly. Usually only found on custom-made rifles the R1’s barrel is cryogenically frozen to -300° F which changes the steel at the molecular level. The result, better barrel harmonics providing superior accuracy. Includes the barrel and bolt assembly Barrel is drilled and tapped for both iron sights and scope bases Caliber: .300 Win Mag Barrel Length: 20? Gloss Blued finish Manufacturer: Benelli ITEM INFO CATEGORY: Rifles TYPE: Semi-Automatic BRAND: Benelli MODEL: R1 CALIBER: 300 WSM TECH SPECS CAPACITY: 10 WEIGHT: 7 MATERIAL: Black/Wood SIGHT: Drilled and tapped. PURPOSE: Semi Auto Rifle

Does not include magazine or case. UPC ECOM00160785 Caliber 223 Finish BLACK Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

I have a Sauer & Sohn’s K98 Mauser Sniper Rifle for sale. This rifle features an original stock, barrel and scope…just as it came from the factory. The serial number is stamped in all the right places. The scope is good and clear. This firearm is an excellent addition to any serious collector! UPC ECOM00122945 Caliber 8MM MAUSER Finish BLUE STEEL Capacity 5+1 ROUNDS Weight NOT SPECIFIED Action BOLT ACTION Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 24 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

This light weight, tactical style .22lr caliber rifle is every plinking master’s dream come true! Based off of the classic GSG 22 caliber rifle operating system, the GSG-16 features several enhancements to give it a dashing new look for the next generation of shooters. The GSG-16 features a newly designed collapsible stock that also serves as an additional magazine storage compartment for either high or low capacity magazines. The re-designed forfend features standard picatinny rails mounted onto an MLOK style hand guard. The cocking tube assembly features an ambidextrous charging handle so you can swish up charging rounds to meet your comfort style. Finally, the redesigned front and rear sight have been simplified and streamlined to give the shooter faster target acquisition over previous GSG models. Whether you’re just starting out fresh, or dusting off your old GSG mags to throw some lead down range, the GSG-16 is a fun and affordable .22lr gun that deserves a spot in your collection today! GSG-16 Specifications Caliber: 22 LR Model: GSG-16 Barrel Length Range: 16? To 16.99? Overall Length; 34.25? Receiver Finish: Green Receiver Material: Polymer Safety: Ambidextrous Stock Description: Collapsible Weight: 5.84 Lbs Barrel Length: 16.25? More Information Barrel Length 16.25 Caliber .22 LR Capacity 22 Condition New in Box Finish Per Color OD Green Manufacturer Part Number GERGGSG1622G Model GSG-16 Type Modern Sporting Rifles UPC 819644025122

OSS UPC ECOM00161370 Caliber 270 WIN Finish BLUE Capacity 4+1 ROUNDS Weight NOT SPECIFIED Action BOLT ACTION Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 23 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED