MADDI GRIFFIN 50 CAL BMG SINGLE SHOT RIFLE

We have a used Barett M107A1 semi-automatic rifle for sale. This is chambered in 50BMG with a 29? barrel. It comes as shown in pictures with case, manual, one 10 round magazine, and vortex viper PST, 5-25×50 scope. This is in Good Used Condition. Overall we would grade at approx 95%. Check out the pictures and feel free to call or email with any questions. UPC ECOM00173872 Caliber 50 BMG Finish BLACK Capacity 10 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 29 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

The Beretta ARX 100 . 223 REM/5.56 NATO Semiautomatic Rifle is a fully modifiable rifle with a pinless design and Picatinny rails on the top, sides and fore-end. The rifle is equipped with a removable, adjustable flip-up rear sight and features a 30-round magazine and a short-stroke gas piston system. UPC ECOM00025968 Caliber 223 REM/5.56 NATO Finish BLACK Capacity 15 ROUNDS Weight NOT SPECIFIED Action NOT SPECIFIED Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length NOT SPECIFIED Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

The ARX160 is a modern assault rifle of Italian origin. Development started in the early 2000’s for the Italian “Soldado Futuro” future soldier program. Design The design is a departure from Beretta’s previous AR 70/90 in being gas operated by means of a short stroke gas piston. Internally the weapon is made out of metal with the furniture being all plastics. A four position folding stock is standard. The design is modular as barrels can be swapped, the caliber could be changed and Picatinny rails allow mounting of accessories and optics. Firepower The ARX160 fires the 5.56x45mm NATO round from 30 round STANAG magazines. It is capable of semi-automatic fire and fully automatic fire at a 700 round per minute cyclic rate of fire. It is possible to mount the GLX160 under-barrel grenade launcher. Users The ARX160 has been bought in limited quantities by several users. It has been chosen as part of the the Italian “Soldado Futuro” future soldier program and may be acquired in quantity. Origin; Italy Type ; Assault rifle Entered service ; 2010 Status; In service Development ; 2000’s Developer ; Italy – Beretta Ulrich Zedrosser ; Production 2008 – present Producer ; Italy – Beretta Number produced Over 40.000 produced by 2015, production continues

Barrett Firearm Manufacturing, Inc. model M107 .50 BMG semi auto rifle. This is actually marked M107 which is the military quality version of the famous M82A1. This example is all steel construction with a 32? fluted barrel with a dual-chevron muzzle break, flip-up peep rear sight, detachable carry handle and a Nightforce Precision NXS scope. The rifle includes two magazines, a folding metal bi-pod, AR-15 style grip and safety and a rubber padded butt stock with club foot style hand rest and rear mono pod. Everything comes neatly packaged in a Pelican 1750 hard case. Condition: New and un-fired. Dimensions 32 Artist or Maker M107 Notes .50 BMG

LIKE NEW Freedom Ordnance FX-9 9MM. 16? Barrel. Comes with 33 round magazine. Comes with factory box. Like new except for a small amount of wear on handguard(shown in pictures). Seller must collect sales tax. UPC 856169007004 Caliber 9MM LUGER (9X19 PARA) Capacity 33+1 ROUNDS Barrel Length 16? BARREL Weight 6.1 LBS. Finish BLACK Action SEMI AUTO

The fast-handling and quick-shooting FN SCAR® 16S is upgraded with Non-Reciprocating Charging Handles. The new, dual charging handles enable any shooting position, grip style or optic choice, ensuring any braced or barrier-contact position shoots flawlessly. A rugged, monolithic upper receiver with MIL-STD-1913 rail provides space for rail-mounted accessories, and a folding buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 16S in 5.56x45mm is the benchmark for reliability and versatility from a light recoiling, piston-driven platform. All current 16S SCARs are Belgium made, there are those that were VA or SC assembled. However, FN might be no longer importing the 16S and resort to US made only. 98521-2 FN SCAR® 16S NRCH 5.56x45mm Blk 16-in 30-Rnd 845737013622 98621-2 FN SCAR® 16S NRCH 5.56x45mm Blk 16-in 10-Rnd 845737013639 98501-2 FN SCAR® 16S NRCH 5.56x45mm FDE 16-in 30-Rnd 845737013561 98601-2 FN SCAR® 16S NRCH 5.56x45mm FDE 16-in 10-Rnd 845737013615

OSS UPC ECOM00161370 Caliber 270 WIN Finish BLUE Capacity 4+1 ROUNDS Weight NOT SPECIFIED Action BOLT ACTION Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 23 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

It’s a hoot to shoot for sure and maybe more so than my SP5 (just maybe). So trying out a few options and started farkling out the PDW. Starting out with the following: Rear Drum (thx to @ Indreams84) Magpul forend/handguard HS1 finger light (green laser). Had to dremel out a hole for HS1 laser to poke/emitt through. Worked out great. JMAC Brace 8” raised arm bar 1913 SigMech folder Cheekweld affixed to top of brace (holes are predrilled and threaded) Gearworks Tailhook MOD1C Also saw the B&T retractable stock at LGS as another option that I’m going to ponder on: Per the measurements it seems that when retracted with MAGPUL forend/handguard appears to be issue. It would appear to be an unfavorable check rest but guess one can adjust and get used to it. It would appear the small end, would not seat great in shoulder/pec area, but again guess you can find a good area to pocket it into and get used to it quickly. Appears to retract really nice and seems compact and extends easily, and seems like great lockup with very minor up/down flex, hopefully minimal rubbing along body frame. so will also soon consider the Vertical grip and will need to pay it visit at the LGS soon again while pending the process. The JMAC Brace Pros: It’s a Brace and cheek hold is really comfortable and supportive. if you wanted to add an RMR/Optic it’s adjustable to slide up and down via the pic-rail and sig mech. I ended up cutting out the foam and was able to fit in it’s folded condition. It’s tight and although does fully seat, it closes and works out fine. Let’s see your SP5K-PDW Stock or Brace here in order to see the various options out there for the PDW.

Built from a MIL-SPEC foundation with HP/MPI-tested and certified bolt and M16-style bolt carrier group with mid-length gas system and H buffer, the TAC3 performs reliably. Superior accuracy and performance come from the company's signature chrome-lined, cold hammer-forged barrel made from FN proprietary steel, fully free-floated within a Hodge Defense-designed wedge lock handguard. The rigid handguard, affixed with a proprietary barrel nut and anti-rotation technology, provides continues 12 oclock rail space and multiple M-LOK attachment points for lights, lasers and other accessories while minimizing deflection during hard use. Outfitted with ambidextrous charging handle and selector, and FNs custom 6-position buttstock, pistol grip and magazine, the FN 15 TAC3 is a streamlined, rugged carbine ready for any situation. This model comes with ambidextrous radians controls.

American Tactical Imports (ATI) showed off their AR-15 shotgun chambered in .410 gauge a few years back, well they’re finally coming out. I was walking through ATI’s booth to go fondle their MP-40 replica chambered in 9mm when I stumbled on the Omni Hybrid .410 shotgun. The new shotgun uses ATI’s OMNI Hybrid Mil-Spec, multi-caliber, polymer and metal lower receiver. The lower also uses a standard AR-15 6 position stock. The upper has a 2.5? chamber and an 18.5? barrel, 13? free float rail with Key MoD slots and a full length Picatinny rail up top. The Omni Hybrid .410 will include a 5 round magazine but a 15 round mag will also be available. The mags also have round count holes along the side. ATI claims their new Omni Hybrid .410 is compatible with most bird shot, buck shot and slugs on the market. I got to play around with it a bit and it’s pretty light, they didn’t have an exact weight but according to their prototype from a few years back they claimed it was only 6.5lbs.

The seller of this item assumes all responsibility for this listing. You must contact the seller to resolve any questions or concerns before placing a bid. Payment must be made using U.S. dollars ($) unless otherwise stated in the listing. Firearms may only be shipped to a licensed dealer (FFL Holder). Some listed items may not be legal in every state. Item 909047792 Location Rustburg, VA 24588 Shipping Buyer pays actual shipping costs for the following option(s): Ground No international shipments Payment Methods Personal Check, PayPal, USPS Money Order, Money Order Checkout Contact Seller for Payment Applicable Taxes and Fees Sales tax collected based on ship to address Inspection/ Return Policy AS IS – No refund or exchange

Does not include magazine or case. UPC ECOM00160785 Caliber 223 Finish BLACK Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED