+1 (702) 963 3706
The 110 Precision takes Savage's legendary 110 action and makes it even more dynamic. With a custom stock designed by the accuracy experts at Modular Driven Technologies (MDT), the 110 Precision is fully customizable. From the adjustable comb height and length of pull, to the capabilities of its AccuTrigger this aluminum framed rifle is setup for exacting performance.
It’s a hoot to shoot for sure and maybe more so than my SP5 (just maybe). So trying out a few options and started farkling out the PDW. Starting out with the following: Rear Drum (thx to @ Indreams84) Magpul forend/handguard HS1 finger light (green laser). Had to dremel out a hole for HS1 laser to poke/emitt through. Worked out great. JMAC Brace 8” raised arm bar 1913 SigMech folder Cheekweld affixed to top of brace (holes are predrilled and threaded) Gearworks Tailhook MOD1C Also saw the B&T retractable stock at LGS as another option that I’m going to ponder on: Per the measurements it seems that when retracted with MAGPUL forend/handguard appears to be issue. It would appear to be an unfavorable check rest but guess one can adjust and get used to it. It would appear the small end, would not seat great in shoulder/pec area, but again guess you can find a good area to pocket it into and get used to it quickly. Appears to retract really nice and seems compact and extends easily, and seems like great lockup with very minor up/down flex, hopefully minimal rubbing along body frame. so will also soon consider the Vertical grip and will need to pay it visit at the LGS soon again while pending the process. The JMAC Brace Pros: It’s a Brace and cheek hold is really comfortable and supportive. if you wanted to add an RMR/Optic it’s adjustable to slide up and down via the pic-rail and sig mech. I ended up cutting out the foam and was able to fit in it’s folded condition. It’s tight and although does fully seat, it closes and works out fine. Let’s see your SP5K-PDW Stock or Brace here in order to see the various options out there for the PDW.
This is a First gen, BROWNING CITORI 4Gauge skeet set. I’m original carry case. NOTE: it has Barrel inserts for the 20, 28 and 410 gauges. A must have!!! UPC ECOM00174677 Gauge 12 / 20 / 28 / 410 GA Finish BLUED W/ ENGRAVING Capacity 2 ROUNDS Weight NOT SPECIFIED Action OVER UNDER Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 28 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED BROWNING CITORI SKEET quantity
Remington Model 700 AAC-SD .300 Blackout & Bipod 16.5" 5-R Tactical Threaded Barrel / Tiptop Bipod, Remington 700 AAC-SD bolt-action rifle. It's chambered in the desierable .300 Blackout, Hogue stock, with 5-R Tactical 1:7 Twist 16.5" threaded barrel, with removable muzzle device. Other features include Weaver rail and Tiptop bipod. Rifle has been lightly shot, exhibits no major signs of wear or abuse, and has an excellent looking bore. Exactly as pictured...Thanks for looking!
DPMS continues to provide you with quality firearms that you can trust for any popular shooting sports discipline. This particular Panther model features a set of forged aluminum upper and lower receivers which are standard throughout the industry as meeting the military specification. The crown jewel of this rifle is the 16? Lightweight FNC Melonite treated barrel. The Ferritic Nitrocarburizing is a hardening process which improves barrel performance over mil-spec chrome plating in terms of barrel longevity, corrosion resistance and accuracy. By diffusing carbon and nitrogen into the barrel steel rather than adding a layer of material (as is the case in traditional chrome plating) the LCAR barrel is more durable and corrosion resistant without negatively effecting accuracy. Specifications and Features: DPMS 5.56 LCAR AR-15 Semi Auto Rifle 60140 Direct Gas Impingement System Carbine Length Gas System 5.56 NATO (Accepts .223 Remington) 16? Lightweight FNC (Melonite) Treated Barrel 1:8? Twist Rate Threaded 1/2×28 Forged 7075-T6 Aluminum M4 Flat Top Upper Receiver Forged 7075-T6 Aluminum Lower Receiver Mil-Spec Buffer Tube 6 Position M4 Stock A2 Flash Hider Fixed Front Sight Base (F Marked) Magpul Flip Up Rear sight Synthetic Polymer Glacier Hand Guard 30 Round Magazine Accepts Standard Pattern AR-15 Magazines A2 Pistol Grip Standard Sling Loop Bayonet Lug Type III Hard Coat Anodized Upper/Lower Receiver Finish Overall Length 36.5? Overall Weight 6.4lbs Matte Black
The Kel-Tec SUB2000 GLOCK folding carbine rifle uses reliable Glock magazines for compatibility with the pistol you already own. Don’t own a Glock? No problem. The SUB2000 GLOCK is still a great choice. Glock magazines are among the most reliable and commonly available magazines out there and come in a wide variety of capacities from 10 round compliant magazines to high capacity drums. The folding SUB2000 is a pistol caliber carbine that can be stored or transported in a small space yet quickly deployed when you need it. The 16.25? barrel of this versatile carbine translates into additional accuracy, velocity, and downrange firepower to most out of your pistol ammunition. The SUB2000 is adaptable to your requirements thanks to Picatinny rails and M-Lok compatibility. Designed with a straight blow-back system, the SUB2000 is very simple, reliable and easy to maintain. With two decades of use, the SUB2000 is a proven platform. The sights are intuitive, the stock is adjustable and field stripping is a breeze. The SUB2000 is the perfect survival gun, Ideal for backpacking, as a backup in your truck, or stored in your home. But no matter what your reason for owning it, the SUB2000 is simply fun to shoot. ITEM INFO CATEGORY: Rifles TYPE: Semi-Automatic Rilfes BRAND: Kel-Tec MODEL: Kel-Tec rifles CALIBER: 9mm TECH SPECS CAPACITY: 17+1 WEIGHT: 45 MATERIAL: Green SIGHT: PURPOSE: Semi Auto Rifles
Built from a MIL-SPEC foundation with HP/MPI-tested and certified bolt and M16-style bolt carrier group with mid-length gas system and H buffer, the TAC3 performs reliably. Superior accuracy and performance come from the company's signature chrome-lined, cold hammer-forged barrel made from FN proprietary steel, fully free-floated within a Hodge Defense-designed wedge lock handguard. The rigid handguard, affixed with a proprietary barrel nut and anti-rotation technology, provides continues 12 oclock rail space and multiple M-LOK attachment points for lights, lasers and other accessories while minimizing deflection during hard use. Outfitted with ambidextrous charging handle and selector, and FNs custom 6-position buttstock, pistol grip and magazine, the FN 15 TAC3 is a streamlined, rugged carbine ready for any situation. This model comes with ambidextrous radians controls.
NEW IN BOX---NO CC FEES---Panther 7.62 NATO Oracle has 16 in barrel made of 4140 Chrome moly steel. Has 6 grooves, right hand 1X10 twist, button rifled. DPMS 6 Position Pardus Stock. Milled from a solid billet of 6061-T6 aluminum, Hard coat anodized per Mil Spec, Integral trigger guard, Aluminum magazine release button, Standard AR-15 trigger group.
Benelli R1 .300 Win Mag 20? Barrel and Bolt Assembly. Usually only found on custom-made rifles the R1’s barrel is cryogenically frozen to -300° F which changes the steel at the molecular level. The result, better barrel harmonics providing superior accuracy. Includes the barrel and bolt assembly Barrel is drilled and tapped for both iron sights and scope bases Caliber: .300 Win Mag Barrel Length: 20? Gloss Blued finish Manufacturer: Benelli ITEM INFO CATEGORY: Rifles TYPE: Semi-Automatic BRAND: Benelli MODEL: R1 CALIBER: 300 WSM TECH SPECS CAPACITY: 10 WEIGHT: 7 MATERIAL: Black/Wood SIGHT: Drilled and tapped. PURPOSE: Semi Auto Rifle
We take pride in the quality and originality of our products
Our products reach our clients in a timely and discreet manner
We provide support for all customers at all times
If there are any defects upon arrival, do return the weapon and be refunded in full.