Built from a MIL-SPEC foundation with HP/MPI-tested and certified bolt and M16-style bolt carrier group with mid-length gas system and H buffer, the TAC3 performs reliably. Superior accuracy and performance come from the company's signature chrome-lined, cold hammer-forged barrel made from FN proprietary steel, fully free-floated within a Hodge Defense-designed wedge lock handguard. The rigid handguard, affixed with a proprietary barrel nut and anti-rotation technology, provides continues 12 oclock rail space and multiple M-LOK attachment points for lights, lasers and other accessories while minimizing deflection during hard use. Outfitted with ambidextrous charging handle and selector, and FNs custom 6-position buttstock, pistol grip and magazine, the FN 15 TAC3 is a streamlined, rugged carbine ready for any situation. This model comes with ambidextrous radians controls.
It’s a hoot to shoot for sure and maybe more so than my SP5 (just maybe). So trying out a few options and started farkling out the PDW. Starting out with the following: Rear Drum (thx to @ Indreams84) Magpul forend/handguard HS1 finger light (green laser). Had to dremel out a hole for HS1 laser to poke/emitt through. Worked out great. JMAC Brace 8” raised arm bar 1913 SigMech folder Cheekweld affixed to top of brace (holes are predrilled and threaded) Gearworks Tailhook MOD1C Also saw the B&T retractable stock at LGS as another option that I’m going to ponder on: Per the measurements it seems that when retracted with MAGPUL forend/handguard appears to be issue. It would appear to be an unfavorable check rest but guess one can adjust and get used to it. It would appear the small end, would not seat great in shoulder/pec area, but again guess you can find a good area to pocket it into and get used to it quickly. Appears to retract really nice and seems compact and extends easily, and seems like great lockup with very minor up/down flex, hopefully minimal rubbing along body frame. so will also soon consider the Vertical grip and will need to pay it visit at the LGS soon again while pending the process. The JMAC Brace Pros: It’s a Brace and cheek hold is really comfortable and supportive. if you wanted to add an RMR/Optic it’s adjustable to slide up and down via the pic-rail and sig mech. I ended up cutting out the foam and was able to fit in it’s folded condition. It’s tight and although does fully seat, it closes and works out fine. Let’s see your SP5K-PDW Stock or Brace here in order to see the various options out there for the PDW.
The legendary FN SCAR 17S is upgraded with Non-Reciprocating Charging Handles. The new, dual charging handles enable any shooting position, grip style or optic choice, user swappable in the field. The FN SCAR 17S ensures any braced or barrier-contact position shoots flawlessly. The rugged, monolithic upper receiver with a full-length MIL-STD-1913 rail provides more space for rail-mounted accessories, and a folding buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 17S is the benchmark for accuracy and versatility from a light recoiling, piston-driven platform. SPECS CALIBER: 7.62x51mm OPERATION: Short-stroke gas piston MAG CAPACITY: 10 or 20 Rd. WEIGHT: 8.0 lb. BARREL LENGTH: 16.25? OVERALL LENGTH: 36? – 38.5? TWIST RATE: 1:12 RH PRIMARY FEATURES New bolt carrier assembly with NRCH enables any shooting position or optic choice, reduces felt recoil Monolithic receiver Short-stroke gas piston RECEIVER Hard-anodized monolithic aluminum MIL-STD 1913 accessory rails at the 3, 6, 9 and 12 o’clock positions Adjustable folding front and folding/removable rear iron sights BARREL Cold hammer-forged, chrome-lined, fully free-floating with compensator STOCK Telescoping side-folding polymer stock Adjustable cheekpiece A2-style pistol grip OPERATING CONTROLS Dual, ambidextrous charging handles remain static under fire, user swappable left/right Ambidextrous safety lever and magazine release Enlarged trigger guard for easier access when wearing gloves MAGAZINE Steel body Low friction follower
Up for sale is an Excellent Condition Ultra Rare Wytwornia Broni Jacek Popinski Fox AK74 Polish 5.56 Semi Automatic rifle. This was custom built by Horse Shoe Firearms, LLC in Horse Shoe North Carolina. This kit is all factory new WBP fox with AK Builder 5.56 Barrel and Childers CG556 receiver. There is virtually no wear on this firearm as pictured and has been test fired for functionality. Includes one original 30rd clear smoke Polish 5.56 magazine as shown. UPC ECOM00170400 Caliber 5.56 NATO Finish BLACK Capacity 30+1 ROUNDS Weight NOT SPECIFIED Action SEMI AUTO Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 16.25 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED
Zastava CAI N-PAP M70 chambered in 7.62x39mm. This rifle has a 16" barrel that has a good bore. This neat AK47 features wood furniture, 30rd Magpul PMAG, and Serbia Manufacture. It comes in NIB condition with all that's pictured.side scope rail, mag, slant brake, factory papers
Remington Model 700 AAC-SD .300 Blackout & Bipod 16.5" 5-R Tactical Threaded Barrel / Tiptop Bipod, Remington 700 AAC-SD bolt-action rifle. It's chambered in the desierable .300 Blackout, Hogue stock, with 5-R Tactical 1:7 Twist 16.5" threaded barrel, with removable muzzle device. Other features include Weaver rail and Tiptop bipod. Rifle has been lightly shot, exhibits no major signs of wear or abuse, and has an excellent looking bore. Exactly as pictured...Thanks for looking!
AR-15 pistol is a classification that exists due to some silly American gun laws and definitions. An AR pistol cannot have a stock, but can have a bare and exposed buffer tube. Another no-no is a vertical grip, but an angled grip like the Magpul AFG is legal. Now of course nobody wants to run afoul of the Federal Government, so it’s imperative that you understand what makes an SBR an SBR, and what makes AR pistols legal. It may appear to be complicated and obfuscated but the defining characteristics are pretty straight forward if you know what you’re looking for. AR-15 pistols can have barrels as short as you want them to. Personally, I own an AR-15 pistol with a 7.5-inch barrel and, while it is ridiculous, it’s a lot of fun. Over the last few years, the popularity of AR-15 pistols has grown significantly. This growth is mostly tied to the advent of stabilizing braces. Stabilizing braces turned a gaudy, heavy, and awkward gun into a stable, comfortable-to-shoot weapon. Why Would I Want One? We won’t dive too deep into the NFA, but the section that concerns this article is the law that rifles must have 16-inch barrels, or else they are regulated under the NFA. So, if you wanted an AR-15 with a 7.5-inch barrel, you’d have to pay a tax stamp, ask for permission, and wait for 3 to 6 months for approval. Once approved you could then own an SBR. Or you could just buy an AR pistol and skip all that. There are a lot of other reasons you might want an AR pistol, besides just the tax stamp.
The fast-handling and quick-shooting FN SCAR® 16S is upgraded with Non-Reciprocating Charging Handles. The new, dual charging handles enable any shooting position, grip style or optic choice, ensuring any braced or barrier-contact position shoots flawlessly. A rugged, monolithic upper receiver with MIL-STD-1913 rail provides space for rail-mounted accessories, and a folding buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 16S in 5.56x45mm is the benchmark for reliability and versatility from a light recoiling, piston-driven platform. All current 16S SCARs are Belgium made, there are those that were VA or SC assembled. However, FN might be no longer importing the 16S and resort to US made only. 98521-2 FN SCAR® 16S NRCH 5.56x45mm Blk 16-in 30-Rnd 845737013622 98621-2 FN SCAR® 16S NRCH 5.56x45mm Blk 16-in 10-Rnd 845737013639 98501-2 FN SCAR® 16S NRCH 5.56x45mm FDE 16-in 30-Rnd 845737013561 98601-2 FN SCAR® 16S NRCH 5.56x45mm FDE 16-in 10-Rnd 845737013615
NEW IN BOX---NO CC FEES---Panther 7.62 NATO Oracle has 16 in barrel made of 4140 Chrome moly steel. Has 6 grooves, right hand 1X10 twist, button rifled. DPMS 6 Position Pardus Stock. Milled from a solid billet of 6061-T6 aluminum, Hard coat anodized per Mil Spec, Integral trigger guard, Aluminum magazine release button, Standard AR-15 trigger group.
We take pride in the quality and originality of our products
Our products reach our clients in a timely and discreet manner
We provide support for all customers at all times
If there are any defects upon arrival, do return the weapon and be refunded in full.