UNMARKED 1832 FOOT ARTILLERY SWORD

UNMARKED 1832 FOOT ARTILLERY SWORD

Item ID:

91075800

UPC:

2691175933

$700$600

Availability - In Stock

PRODUCT INFO

Category:

Knives & swords

Type:

Knives & swords

Brand:

UNMARKED

Model:

UNMARKED

Caliber:

..

TECHNICAL SPECS

Capacity:

00

Weight:

00

Material:

Steel

Sight:

Fixed Blade

Purpose:

Knives & swords

Unmarked 1832 Foot Artillery sword. The 19" blade is in very good condition with only very minor pitting scattered about. The solid brass handle is of very good quality showing a nice even patina. The scabbard is also in very good condition and seldom found with this model sword. The leather is excellent with typical age cracks. The brass tip has a couple of small dings or dents but otherwise far above average condition. As mentioned before, neither the blade, hilt, handle or scabbard have any markings whatsoever.

Write a review




35 in Fantasy Sword PK2460-355 Fantasy Sword & Chain, All metal construction Overall Length: 35 , Shaft is 1 diameter polished stainless steel Handle Width 8-3/4 Blade width 4, Blade is not sharp Chain is approximately 24 long Handle Rotates on shaft and has foam grip Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



Gil Hibben, famous for his unique knife and blade designs, custom crafted this knife especially for United Cutlery in 1991 as the second in his annual Fantasy Series offerings. Mirror polished 420 stainless steel blade split into two sections Gil's personal stamp etched on the blade Silver wire-wrapped hilt Genuine leather sheath 5 1/2" blade length 11 1/4" overall length



This sword is only for those that fight for Valhalla. With a 24 inch blade forged from Damascus steel, you can definitely say that this is no run-of-the-mill Lang Saex sword. This high-quality 1095/15N20 Damascus has been between 400-520 layers, and has a Rockwell rating of 58-60 HRC. Because of the unique shape of this single edged sword, it can primarily be used as a stabbing weapon, but is just as effective at slashing. The full tang runs in the centerline of the blade, and inserted into a Durable sheesham wood handle that is stained a rich mahogany brown. The guard and pommel are both made of pure brass, with traditional Norse inscriptions etched into them. The included genuine black leather sheath comes with beautiful gold Viking inscriptions as well, including that of a serpent, and is meant to be worn over the shoulder. Overall Length: 32 inches, Blade Length: 24 inches



 38.5" OVERALL RED SAMURAI SWORD WITH ATTACHED THROWING KNIFE    Samurai Sword 38.5" OVERALL 28" 4MM BLADE, STAINLESS STEEL SATIN FINISHED BLADE 9.5" RED CORD WRAPPED HANDLE THROWING KNIFE ATTACHED TO SCABBARD INCLUDES BLACK ALUMINUM SCABBARD & ZINC ALLOY TSUBA



Arabian Sands Sabre Sword & Sheath - BK1335 This Arabian Sands Sabre Sword is unlike any sword in your collection! Get yours today! Features: Extra wide 13" heat tempered 440 stainless steel blade Solid wood grip Heavy brass guard and pommel Includes leather sheath 17 3/4" overall Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



. The DAGGER style knife is 8.25 inches OVERALL with 4 inch DAGGER BLADE signed on bolster side by the knife maker, and on "VINTAGE IVORY" handle by the scrimshander. The bolster features a deep relief scroll engraving on one side , with a beautiful feminine face on the other side of bolster. All scrimshaw on Ben Shostle engraved items are done by his daughter Benita Bonshire, super talented, schooled artist, as seen in this beautifully scrimmed nude. NO SHEATH. Included is a Ben Shostle Arms Engraver pamphlet, which contains pictures of Ben's engravings, scrimshaws, by his daughter, and information about the artists. This knife has Never been used or carried. Must be 18 years old to buy this knife..



This sword is constructed of stainless steel with a factory edge. The guard and wooden handle have a glossy red finish to match the wooden scabbard. Overall length is 41 inches.



3 PIECE SAMURAI SWORD SET 3 Piece Samurai Sword Set 40" Overall (Katana) 4Mm Thickness Stainless Steel Blade Black & Green Cord Wrapped Handle Includes Display Stand Includes Cloth Wrapped Scabbard And Zinc Alloy Fittings You must be at least 18 years old to purchase products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local, state and federal laws is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



These guards are made out of steel and come with a beautiful wooden display gift box with a red silk layer inside. The box is made from wood and has a black imprint of the guard outside on the cover. This item is a perfect gift for all serious sword collectors.



Medieval Sword Metallic Chrome Blade Spark Foam Irish Ring SPARKFOAM SWORD   Features of Spark Foam: 1. High Density Durable "EVA Foam" 2. Special Coating that will NOT wrinkle easily 3. Painting will NOT go off easily 4. Durable Fiberglass inner core inside, battle ready without cracking the sword   Specification Overall Length: 40" 32" Metallic Chrome Blade Handle Length; 8 " Straight Handguard with Black Handle & Circular Pommel All made of FOAM w/ inner core



37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle. In the 18th century the cane replaced the sword as an essential part of a gentleman's attire. While the cane was used as a walking stick it could also be used as a sword, or contain hidden compartments for alcohol or a firearm. The great men of the last two centuries have carried canes, from Sherlock Holmes, to Gregory House and of course Scrooge McDuck. Every Gentleman Requires a Cane. This cane is not a substitute for a medical walking device. The cane shaft has been constructed from steel with a black glossy finish. Hidden inside of the black metal shaft is a 12” hidden blade made of stainless steel, which can be accessed by unscrewing the handle. The bottom of the cane features a tough rubber gripper. The head of the cane has been constructed from steel with Rolling Evil Eye With Skeletal Hand Handle. Cane Overall Length: 37" Blade Length: 12" Handle Length: 4" Handle Width: 2" Cane Shaft Material: Steel Cane Head Material: Steel



Other Product details

1045 Carbon Steel  Blood Groove Samurai Katana     SpecificationsOverall Length: 40.25 InchesBlade Length: 27.75 InchesBlade Material: 1045 Carbon SteelBlade Thickness: 7mmTang: Full Length Steel TangSharpness & Functionality: Sharp, 8.5/10, Battle ReadyTsuba: Solid Steel, Black Oxide FinishHandle Length: 10.75 InchesHandle: Solid Hardwood, White Faux Rayskin, Black Ito WrapSaya: Hardwood, Black  FinishIncludes: Katana Sword Bag



This futuristic piece is equipped with a 9 3/4" fantasy blade constructed from stainless steel. The ABS impact resistant handle features cast aluminum accents with antique silver finish. An added feature is the small dagger which easily removes at the push of a button. An out of this world experience. 20 1/2" overall



 9in Ninja Set of 3 White Throwing Knives Red  Set of three throwers! 9in Set is an excellent choice for throwing and putting on display. In the anime and manga, often explosive spell-bound tags are attached to the loops and the throwing knives, are stuck to something. The 9in knife Set comes With a Nylon Sheath that fits all three. Handle is wrapped with Black Cordage. 440 Stainless steel blade with flat black ''ninja'' finish.*Must be 18 years or older to buy* Specifications Overall Length: 9 Inches Blade Length: 5.3 Inches Blade Material: 440 Stainless Steel Blade Thickness: 3mm Tang: Full Tang Sharpness & Functionality: Very Sharp, Great for Throwing & Display Blade Features: Double Edge, Spear Point, Ridgeline Handle Length: 3.75 Inches Handle: Cord Wrapped Other Features: Finger Loop Includes: Black Nylon Sheath, Triple Pouch Finish: Flat Black, White



80 Inch Overall The Grim Reaper Death Scythe. Scythe GRIM REAPER'S DEATH SCYTHE. With its pole extending an enormous 80" tall, this scythe has a razor sharp carbon steel curve blade extending 23 1/2" long. The Grim Reaper's Death Scythe has an antiqued looks which give it the aged looks. Specifications: Overall length: 80" Blade Length: 23 1/2" Blade Material: Carbon Steel, extremely sharp Pole Material: Wooden



2-piece Chinese Hook Sword Set Silver - XL1112 Dominate your dojo with these Chinese twin hook swords! Martial arts enthusiasts will enjoy using these traditional weapons! Each sword measures 33 1/4" overall and offers one-piece stainless steel construction and authentic pattern design with a black finish. Corded wrapped grip on handles One piece stainless steel construction Fully functional set of two 33 1/4" overall legnth of each sword Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



Pathogen Zombie Killer Double Blade Liner Lock Tactical Knife offers the added protection you will need during a zombie attack. The aluminum handle features a metallic green textured finish and the end of the pommel has an extra-large ring hole for a more secure grip. This is primarily used for slashing or hooking, finger rings are also used in a punching motion for hitting your attacker with the ring itself. But wait this finger hole is not for fighting it has another purpose; it also is a bottle opener because we all know zombie killing can work up a major thirst. Each razor sharp blade is made of a black anodized 440 stainless steel and comes with an ambidextrous thumb stud to allow for swift and quick deployment while sporting a bio hazard Killer emblem. The handle is double wall reinforce and houses the liner locking mechanism to lock the blade in place. The spine offers a supporting bar with a thumb rig for extra support and the knife comes equipped with a black anodize pocket clip which is raised to allow for better ease of use. Overall Length: 10 Inches Blade Length: 4 Inches Blade Material: Stainless Steel, Black anodized finish, Blade Style: Dagger point, Double edge Handle Length: 6 Inches Handle Material: Aluminum, Green Metallic finish Includes: Pocket Clip and Bottle Opener.



Yo, ho ho! What better way to show off your swash-buckling pirate attire than adding the finishing touch that is a ravishing sword belt? The belt is handmade from brown leather, adorned with circular brass studs and 3 signature skull and cross bone studs, with a large square buckle to hold the belt in place. Though this belt is made for a smaller cutlass sword, the sword frog attached to the belt has two adjustable straps with pure brass buckles to fit swords of various shapes and sizes.



High quality

We take pride in the quality and originality of our products

Fast Delivery

Our products reach our clients in a timely and discreet manner

24/7 support

We provide support for all customers at all times

14 - Day Returns

If there are any defects upon arrival, do return the weapon and be refunded in full.

object(mysqli_result)#2 (5) { ["current_field"]=> int(0) ["field_count"]=> int(25) ["lengths"]=> NULL ["num_rows"]=> int(8) ["type"]=> int(0) }