37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle

37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle

Item ID:

29296026

UPC:

1417692104

$44$50

Availability - In Stock

PRODUCT INFO

Category:

Knives & swords

Type:

sword

Brand:

37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle

Model:

37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle

Caliber:

3

TECHNICAL SPECS

Capacity:

1

Weight:

3

Material:

steel

Sight:

fixed

Purpose:

weapon

37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle. In the 18th century the cane replaced the sword as an essential part of a gentleman's attire. While the cane was used as a walking stick it could also be used as a sword, or contain hidden compartments for alcohol or a firearm. The great men of the last two centuries have carried canes, from Sherlock Holmes, to Gregory House and of course Scrooge McDuck. Every Gentleman Requires a Cane. This cane is not a substitute for a medical walking device. The cane shaft has been constructed from steel with a black glossy finish. Hidden inside of the black metal shaft is a 12” hidden blade made of stainless steel, which can be accessed by unscrewing the handle. The bottom of the cane features a tough rubber gripper. The head of the cane has been constructed from steel with Rolling Evil Eye With Skeletal Hand Handle. Cane Overall Length: 37" Blade Length: 12" Handle Length: 4" Handle Width: 2" Cane Shaft Material: Steel Cane Head Material: Steel

Write a review




 38.5" OVERALL RED SAMURAI SWORD WITH ATTACHED THROWING KNIFE    Samurai Sword 38.5" OVERALL 28" 4MM BLADE, STAINLESS STEEL SATIN FINISHED BLADE 9.5" RED CORD WRAPPED HANDLE THROWING KNIFE ATTACHED TO SCABBARD INCLUDES BLACK ALUMINUM SCABBARD & ZINC ALLOY TSUBA



Yo, ho ho! What better way to show off your swash-buckling pirate attire than adding the finishing touch that is a ravishing sword belt? The belt is handmade from brown leather, adorned with circular brass studs and 3 signature skull and cross bone studs, with a large square buckle to hold the belt in place. Though this belt is made for a smaller cutlass sword, the sword frog attached to the belt has two adjustable straps with pure brass buckles to fit swords of various shapes and sizes.



Unmarked 1832 Foot Artillery sword. The 19" blade is in very good condition with only very minor pitting scattered about. The solid brass handle is of very good quality showing a nice even patina. The scabbard is also in very good condition and seldom found with this model sword. The leather is excellent with typical age cracks. The brass tip has a couple of small dings or dents but otherwise far above average condition. As mentioned before, neither the blade, hilt, handle or scabbard have any markings whatsoever.



2-piece Chinese Hook Sword Set Silver - XL1112 Dominate your dojo with these Chinese twin hook swords! Martial arts enthusiasts will enjoy using these traditional weapons! Each sword measures 33 1/4" overall and offers one-piece stainless steel construction and authentic pattern design with a black finish. Corded wrapped grip on handles One piece stainless steel construction Fully functional set of two 33 1/4" overall legnth of each sword Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



 9in Ninja Set of 3 White Throwing Knives Red  Set of three throwers! 9in Set is an excellent choice for throwing and putting on display. In the anime and manga, often explosive spell-bound tags are attached to the loops and the throwing knives, are stuck to something. The 9in knife Set comes With a Nylon Sheath that fits all three. Handle is wrapped with Black Cordage. 440 Stainless steel blade with flat black ''ninja'' finish.*Must be 18 years or older to buy* Specifications Overall Length: 9 Inches Blade Length: 5.3 Inches Blade Material: 440 Stainless Steel Blade Thickness: 3mm Tang: Full Tang Sharpness & Functionality: Very Sharp, Great for Throwing & Display Blade Features: Double Edge, Spear Point, Ridgeline Handle Length: 3.75 Inches Handle: Cord Wrapped Other Features: Finger Loop Includes: Black Nylon Sheath, Triple Pouch Finish: Flat Black, White



Alien vs. Predator Defensive Sword Arm Blade This is truly a unique sword. Based on the arm blades worn by the Celtic and Elder Predators in the movies Alien vs. Predator and it's sequel Alien vs. Predator Requiem, this defensive sword is held in the hand unlike those attached to the arm guards of the Predators. Crafted in the style of the Predators this sword has three sharpened protrusions cut into the long curved black blade. The handle is securely attached to the blade to form a functional fulcrum and is wrapped in leather for a comfortably strong grip. Included is a specially fitted leather sheath that snaps shut and has a convenient shoulder strap for easy carrying. *Must be 18 years or older to buy* Specifications Blade Length: 25 Inches Blade Material: Stainless Steel Blade Finish: Satin Black Hard Coat Handle: 5 Inches Includes: Black Faux Leather Sheath



Medieval Sword Metallic Chrome Blade Spark Foam Irish Ring SPARKFOAM SWORD   Features of Spark Foam: 1. High Density Durable "EVA Foam" 2. Special Coating that will NOT wrinkle easily 3. Painting will NOT go off easily 4. Durable Fiberglass inner core inside, battle ready without cracking the sword   Specification Overall Length: 40" 32" Metallic Chrome Blade Handle Length; 8 " Straight Handguard with Black Handle & Circular Pommel All made of FOAM w/ inner core



35 in Fantasy Sword PK2460-355 Fantasy Sword & Chain, All metal construction Overall Length: 35 , Shaft is 1 diameter polished stainless steel Handle Width 8-3/4 Blade width 4, Blade is not sharp Chain is approximately 24 long Handle Rotates on shaft and has foam grip Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



Case XX Noble Trio Stag Handle 3 Piece Carver Set Great used condition with original storage case. Heavy Stag handles on sharp 12.5 inch carving knife, 10.5 inch meat fork, and 13 inch sharpening steel. This line of cutlery produced in the 1960's is hard to find. The satin interior of the embossed storage case may need cleaning but this set is sure to grab attention at your holiday table



37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle. In the 18th century the cane replaced the sword as an essential part of a gentleman's attire. While the cane was used as a walking stick it could also be used as a sword, or contain hidden compartments for alcohol or a firearm. The great men of the last two centuries have carried canes, from Sherlock Holmes, to Gregory House and of course Scrooge McDuck. Every Gentleman Requires a Cane. This cane is not a substitute for a medical walking device. The cane shaft has been constructed from steel with a black glossy finish. Hidden inside of the black metal shaft is a 12” hidden blade made of stainless steel, which can be accessed by unscrewing the handle. The bottom of the cane features a tough rubber gripper. The head of the cane has been constructed from steel with Rolling Evil Eye With Skeletal Hand Handle. Cane Overall Length: 37" Blade Length: 12" Handle Length: 4" Handle Width: 2" Cane Shaft Material: Steel Cane Head Material: Steel



1045 Carbon Steel  Blood Groove Samurai Katana     SpecificationsOverall Length: 40.25 InchesBlade Length: 27.75 InchesBlade Material: 1045 Carbon SteelBlade Thickness: 7mmTang: Full Length Steel TangSharpness & Functionality: Sharp, 8.5/10, Battle ReadyTsuba: Solid Steel, Black Oxide FinishHandle Length: 10.75 InchesHandle: Solid Hardwood, White Faux Rayskin, Black Ito WrapSaya: Hardwood, Black  FinishIncludes: Katana Sword Bag



This is one solid wooden construction sword from top to bottom. The cross-guard is a stylized cat's head, with two triangles on the top half curving into ear-points and the bottom half tapering down into a single point. The blade is made from wood, painted in silver followed by the wooden handle wrapped with nylon cord. The scabbard is all wood with a black high gloss lacquer finish with a brown bull horn knot. This sword is perfect for cosplay, conventions or just plain pretending. Specifications: Overall Length: 39.5" Blade Length: 27" Handle Length: 10"



Other Product details

Triple Ninja Sword Set includes 3 blades: a 26" sword, a short sword that is dagger-sized at 17.75", a knife blade that measures about 12.25", and a nylon sheath that holds all three blades featuring an adjustable shoulder strap. Each blade is sharpened on both edges and heat treated to just the right hardness. The finish is known as titanium and is iridescent or multi-colored, like oil on water in the sunlight. All of the blades in this Triple Ninja Sword Set have weight reducing cutouts and nylon cord wrapped handle grips. Specifications Sword Overall Length: 26 Inches Sword Blade Length: 17.25 Inches Blade Material: 440A Stainless Steel Sword Blade Thickness: 3mm Tang: Full Tang, Seamless w Blade Sharpness & Functionality: Very Sharp, Solid 3mm Thick, Full Tang Blade Features: Double Edged, Weight Reducing Mid-Length Cutouts Sword Handle Length: 7.5 Inches, 6.5" Grip Handle: Steel Tang, Wrapped w Black Nylon Cord Other Features: Mini Sword Guard Dagger Overall Length: 17.75 Inches Dagger Blade Length: 11 Inches Dagger Handle Length: 5.85 Inches Knife Overall Length: 12.25 Inches Knife Blade Length: 6.75 Inches Knife Handle Length: 4.5 Inches Sheath: Free Nylon Sheath, Adjustable Shoulder Strap, Inner Stiff Liner Blade Finish: Multi-Colored, Titanium Finish, Heat Treated Includes: Sword, Knife, Dagger-sized Sword, Nylon Sheath w Shoulder Strap



As the rival of Saizo and head of Sanada's ninja squad, Sasuke uses this Brave Ninja Sarutobi Spiked Knife while being a proud Koga warrior against the Ten. Sasuke Sarutobis loyalty towards Yukimura is strong and unwavering, and he will not forgive anyone who soils Sanada's name. He hates Iga Ninja, most notably Saizo Kirigakure. At the same time he acknowledges Saizo as a strong ninja and trusts him. His main weapons are two knives. Our Brave Ninja Sarutobi Spiked Knife is just like Sasukes with its spiked knuckle over a nylon wrapped oval handle. The large unsharpened blade comes down in a slight curve with silver waves down its spine. Grab your Brave Ninja Sarutobi Spiked Knife and join the ninja squad. Overall Length: 20.5 Inches Blade Length: 12.25 Inches Blade Thickness: 4mm, Tapered Blade Material: Carbon Steel, Oiled for Preservation Blade Finish: Satin and Black Finish Handle Length (inside): 4.75 Inches Handle Materials: Steel Nylon Wrapped



Yo, ho ho! What better way to show off your swash-buckling pirate attire than adding the finishing touch that is a ravishing sword belt? The belt is handmade from brown leather, adorned with circular brass studs and 3 signature skull and cross bone studs, with a large square buckle to hold the belt in place. Though this belt is made for a smaller cutlass sword, the sword frog attached to the belt has two adjustable straps with pure brass buckles to fit swords of various shapes and sizes.



80 Inch Overall The Grim Reaper Death Scythe. Scythe GRIM REAPER'S DEATH SCYTHE. With its pole extending an enormous 80" tall, this scythe has a razor sharp carbon steel curve blade extending 23 1/2" long. The Grim Reaper's Death Scythe has an antiqued looks which give it the aged looks. Specifications: Overall length: 80" Blade Length: 23 1/2" Blade Material: Carbon Steel, extremely sharp Pole Material: Wooden



Wild Boar Hunting Sword made of German Steel and a Elk handle, hand Crafted in the USA. 22" blade 32" overall comes with a leather scabbard



American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished. Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



Gil Hibben, famous for his unique knife and blade designs, custom crafted this knife especially for United Cutlery in 1991 as the second in his annual Fantasy Series offerings. Mirror polished 420 stainless steel blade split into two sections Gil's personal stamp etched on the blade Silver wire-wrapped hilt Genuine leather sheath 5 1/2" blade length 11 1/4" overall length



Pathogen Zombie Killer Double Blade Liner Lock Tactical Knife offers the added protection you will need during a zombie attack. The aluminum handle features a metallic green textured finish and the end of the pommel has an extra-large ring hole for a more secure grip. This is primarily used for slashing or hooking, finger rings are also used in a punching motion for hitting your attacker with the ring itself. But wait this finger hole is not for fighting it has another purpose; it also is a bottle opener because we all know zombie killing can work up a major thirst. Each razor sharp blade is made of a black anodized 440 stainless steel and comes with an ambidextrous thumb stud to allow for swift and quick deployment while sporting a bio hazard Killer emblem. The handle is double wall reinforce and houses the liner locking mechanism to lock the blade in place. The spine offers a supporting bar with a thumb rig for extra support and the knife comes equipped with a black anodize pocket clip which is raised to allow for better ease of use. Overall Length: 10 Inches Blade Length: 4 Inches Blade Material: Stainless Steel, Black anodized finish, Blade Style: Dagger point, Double edge Handle Length: 6 Inches Handle Material: Aluminum, Green Metallic finish Includes: Pocket Clip and Bottle Opener.



High quality

We take pride in the quality and originality of our products

Fast Delivery

Our products reach our clients in a timely and discreet manner

24/7 support

We provide support for all customers at all times

14 - Day Returns

If there are any defects upon arrival, do return the weapon and be refunded in full.