24 item(s)
Check Out

Total Price : $53148

Gil Hibben Double Shadow Knife

Gil Hibben Double Shadow Knife

Item ID:

16397339

UPC:

1086323167

$25$80

Availability - In Stock

PRODUCT INFO

Category:

Knives & swords

Type:

knives

Brand:

Gil Hibben Double Shadow Knife

Model:

Gil Hibben Double Shadow Knife

Caliber:

3

TECHNICAL SPECS

Capacity:

1

Weight:

3

Material:

steel

Sight:

fixed

Purpose:

weapon

Gil Hibben, famous for his unique knife and blade designs, custom crafted this knife especially for United Cutlery in 1991 as the second in his annual Fantasy Series offerings. Mirror polished 420 stainless steel blade split into two sections Gil's personal stamp etched on the blade Silver wire-wrapped hilt Genuine leather sheath 5 1/2" blade length 11 1/4" overall length

Write a review




Unmarked 1832 Foot Artillery sword. The 19" blade is in very good condition with only very minor pitting scattered about. The solid brass handle is of very good quality showing a nice even patina. The scabbard is also in very good condition and seldom found with this model sword. The leather is excellent with typical age cracks. The brass tip has a couple of small dings or dents but otherwise far above average condition. As mentioned before, neither the blade, hilt, handle or scabbard have any markings whatsoever.



Gil Hibben, famous for his unique knife and blade designs, custom crafted this knife especially for United Cutlery in 1991 as the second in his annual Fantasy Series offerings. Mirror polished 420 stainless steel blade split into two sections Gil's personal stamp etched on the blade Silver wire-wrapped hilt Genuine leather sheath 5 1/2" blade length 11 1/4" overall length



Case XX Noble Trio Stag Handle 3 Piece Carver Set Great used condition with original storage case. Heavy Stag handles on sharp 12.5 inch carving knife, 10.5 inch meat fork, and 13 inch sharpening steel. This line of cutlery produced in the 1960's is hard to find. The satin interior of the embossed storage case may need cleaning but this set is sure to grab attention at your holiday table



Yo, ho ho! What better way to show off your swash-buckling pirate attire than adding the finishing touch that is a ravishing sword belt? The belt is handmade from brown leather, adorned with circular brass studs and 3 signature skull and cross bone studs, with a large square buckle to hold the belt in place. Though this belt is made for a smaller cutlass sword, the sword frog attached to the belt has two adjustable straps with pure brass buckles to fit swords of various shapes and sizes.



An original and early (Pat.Pending) Buck Model 184 Combat/Survival knife with its original sheath, attachment points and compass. Blade is excellent with no abuse and very sharp.



This sword is constructed of stainless steel with a factory edge. The guard and wooden handle have a glossy red finish to match the wooden scabbard. Overall length is 41 inches.



Triple Ninja Sword Set includes 3 blades: a 26" sword, a short sword that is dagger-sized at 17.75", a knife blade that measures about 12.25", and a nylon sheath that holds all three blades featuring an adjustable shoulder strap. Each blade is sharpened on both edges and heat treated to just the right hardness. The finish is known as titanium and is iridescent or multi-colored, like oil on water in the sunlight. All of the blades in this Triple Ninja Sword Set have weight reducing cutouts and nylon cord wrapped handle grips. Specifications Sword Overall Length: 26 Inches Sword Blade Length: 17.25 Inches Blade Material: 440A Stainless Steel Sword Blade Thickness: 3mm Tang: Full Tang, Seamless w Blade Sharpness & Functionality: Very Sharp, Solid 3mm Thick, Full Tang Blade Features: Double Edged, Weight Reducing Mid-Length Cutouts Sword Handle Length: 7.5 Inches, 6.5" Grip Handle: Steel Tang, Wrapped w Black Nylon Cord Other Features: Mini Sword Guard Dagger Overall Length: 17.75 Inches Dagger Blade Length: 11 Inches Dagger Handle Length: 5.85 Inches Knife Overall Length: 12.25 Inches Knife Blade Length: 6.75 Inches Knife Handle Length: 4.5 Inches Sheath: Free Nylon Sheath, Adjustable Shoulder Strap, Inner Stiff Liner Blade Finish: Multi-Colored, Titanium Finish, Heat Treated Includes: Sword, Knife, Dagger-sized Sword, Nylon Sheath w Shoulder Strap.



This sword is only for those that fight for Valhalla. With a 24 inch blade forged from Damascus steel, you can definitely say that this is no run-of-the-mill Lang Saex sword. This high-quality 1095/15N20 Damascus has been between 400-520 layers, and has a Rockwell rating of 58-60 HRC. Because of the unique shape of this single edged sword, it can primarily be used as a stabbing weapon, but is just as effective at slashing. The full tang runs in the centerline of the blade, and inserted into a Durable sheesham wood handle that is stained a rich mahogany brown. The guard and pommel are both made of pure brass, with traditional Norse inscriptions etched into them. The included genuine black leather sheath comes with beautiful gold Viking inscriptions as well, including that of a serpent, and is meant to be worn over the shoulder. Overall Length: 32 inches, Blade Length: 24 inches



Arabian Sands Sabre Sword & Sheath - BK1335 This Arabian Sands Sabre Sword is unlike any sword in your collection! Get yours today! Features: Extra wide 13" heat tempered 440 stainless steel blade Solid wood grip Heavy brass guard and pommel Includes leather sheath 17 3/4" overall Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



Triple Ninja Sword Set includes 3 blades: a 26" sword, a short sword that is dagger-sized at 17.75", a knife blade that measures about 12.25", and a nylon sheath that holds all three blades featuring an adjustable shoulder strap. Each blade is sharpened on both edges and heat treated to just the right hardness. The finish is known as titanium and is iridescent or multi-colored, like oil on water in the sunlight. All of the blades in this Triple Ninja Sword Set have weight reducing cutouts and nylon cord wrapped handle grips. Specifications Sword Overall Length: 26 Inches Sword Blade Length: 17.25 Inches Blade Material: 440A Stainless Steel Sword Blade Thickness: 3mm Tang: Full Tang, Seamless w Blade Sharpness & Functionality: Very Sharp, Solid 3mm Thick, Full Tang Blade Features: Double Edged, Weight Reducing Mid-Length Cutouts Sword Handle Length: 7.5 Inches, 6.5" Grip Handle: Steel Tang, Wrapped w Black Nylon Cord Other Features: Mini Sword Guard Dagger Overall Length: 17.75 Inches Dagger Blade Length: 11 Inches Dagger Handle Length: 5.85 Inches Knife Overall Length: 12.25 Inches Knife Blade Length: 6.75 Inches Knife Handle Length: 4.5 Inches Sheath: Free Nylon Sheath, Adjustable Shoulder Strap, Inner Stiff Liner Blade Finish: Multi-Colored, Titanium Finish, Heat Treated Includes: Sword, Knife, Dagger-sized Sword, Nylon Sheath w Shoulder Strap



American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished. Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



1840 CSA/NCO Confederate Non-Commisioned Officer Short Sword with Steel scabbard 1840 United States Army NCO Sword with Steel scabbard. 1840 United States Army NCO Sword with Steel scabbard The United States Army Non-Commissioned Officer sword was adopted by the War Department in 1840. The Army Noncommissioned Officer Sword has been worn by Army sergeants for over 100 years. It is primarily used today for honor guards and presentations such as PCS and change of command. Our swords have been purchased by the Army NCOA ( Non Commissioned Officers Academy) as well as National Guard and US Army military bases around the world. Specifications Overall Length: 37 Inches Blade Length: 31.5 Inches Blade Material: Steel Handle Material: Brass Scabbard: Metal Replica of the Model 1840 United States Army NCO Sword



Other Product details

36.75" BRASS FINISH SKULL SWORD CANE. 440 stainless steel blade. Seen its camouflaged conceilled carry cane, it is rather undetected and safe. With a blade so thin that slides out of it hiding spontaneously, this is quick weapon to use again any opponent.



Gil Hibben, famous for his unique knife and blade designs, custom crafted this knife especially for United Cutlery in 1991 as the second in his annual Fantasy Series offerings. Mirror polished 420 stainless steel blade split into two sections Gil's personal stamp etched on the blade Silver wire-wrapped hilt Genuine leather sheath 5 1/2" blade length 11 1/4" overall length



Triple Ninja Sword Set includes 3 blades: a 26" sword, a short sword that is dagger-sized at 17.75", a knife blade that measures about 12.25", and a nylon sheath that holds all three blades featuring an adjustable shoulder strap. Each blade is sharpened on both edges and heat treated to just the right hardness. The finish is known as titanium and is iridescent or multi-colored, like oil on water in the sunlight. All of the blades in this Triple Ninja Sword Set have weight reducing cutouts and nylon cord wrapped handle grips. Specifications Sword Overall Length: 26 Inches Sword Blade Length: 17.25 Inches Blade Material: 440A Stainless Steel Sword Blade Thickness: 3mm Tang: Full Tang, Seamless w Blade Sharpness & Functionality: Very Sharp, Solid 3mm Thick, Full Tang Blade Features: Double Edged, Weight Reducing Mid-Length Cutouts Sword Handle Length: 7.5 Inches, 6.5" Grip Handle: Steel Tang, Wrapped w Black Nylon Cord Other Features: Mini Sword Guard Dagger Overall Length: 17.75 Inches Dagger Blade Length: 11 Inches Dagger Handle Length: 5.85 Inches Knife Overall Length: 12.25 Inches Knife Blade Length: 6.75 Inches Knife Handle Length: 4.5 Inches Sheath: Free Nylon Sheath, Adjustable Shoulder Strap, Inner Stiff Liner Blade Finish: Multi-Colored, Titanium Finish, Heat Treated Includes: Sword, Knife, Dagger-sized Sword, Nylon Sheath w Shoulder Strap.



. The DAGGER style knife is 8.25 inches OVERALL with 4 inch DAGGER BLADE signed on bolster side by the knife maker, and on "VINTAGE IVORY" handle by the scrimshander. The bolster features a deep relief scroll engraving on one side , with a beautiful feminine face on the other side of bolster. All scrimshaw on Ben Shostle engraved items are done by his daughter Benita Bonshire, super talented, schooled artist, as seen in this beautifully scrimmed nude. NO SHEATH. Included is a Ben Shostle Arms Engraver pamphlet, which contains pictures of Ben's engravings, scrimshaws, by his daughter, and information about the artists. This knife has Never been used or carried. Must be 18 years old to buy this knife..



1840 CSA/NCO Confederate Non-Commisioned Officer Short Sword with Steel scabbard 1840 United States Army NCO Sword with Steel scabbard. 1840 United States Army NCO Sword with Steel scabbard The United States Army Non-Commissioned Officer sword was adopted by the War Department in 1840. The Army Noncommissioned Officer Sword has been worn by Army sergeants for over 100 years. It is primarily used today for honor guards and presentations such as PCS and change of command. Our swords have been purchased by the Army NCOA ( Non Commissioned Officers Academy) as well as National Guard and US Army military bases around the world. Specifications Overall Length: 37 Inches Blade Length: 31.5 Inches Blade Material: Steel Handle Material: Brass Scabbard: Metal Replica of the Model 1840 United States Army NCO Sword



This futuristic piece is equipped with a 9 3/4" fantasy blade constructed from stainless steel. The ABS impact resistant handle features cast aluminum accents with antique silver finish. An added feature is the small dagger which easily removes at the push of a button. An out of this world experience. 20 1/2" overall



37" Rolling Evil Eye Cane Sword With Skeletal Hand Handle. In the 18th century the cane replaced the sword as an essential part of a gentleman's attire. While the cane was used as a walking stick it could also be used as a sword, or contain hidden compartments for alcohol or a firearm. The great men of the last two centuries have carried canes, from Sherlock Holmes, to Gregory House and of course Scrooge McDuck. Every Gentleman Requires a Cane. This cane is not a substitute for a medical walking device. The cane shaft has been constructed from steel with a black glossy finish. Hidden inside of the black metal shaft is a 12” hidden blade made of stainless steel, which can be accessed by unscrewing the handle. The bottom of the cane features a tough rubber gripper. The head of the cane has been constructed from steel with Rolling Evil Eye With Skeletal Hand Handle. Cane Overall Length: 37" Blade Length: 12" Handle Length: 4" Handle Width: 2" Cane Shaft Material: Steel Cane Head Material: Steel



As the rival of Saizo and head of Sanada's ninja squad, Sasuke uses this Brave Ninja Sarutobi Spiked Knife while being a proud Koga warrior against the Ten. Sasuke Sarutobis loyalty towards Yukimura is strong and unwavering, and he will not forgive anyone who soils Sanada's name. He hates Iga Ninja, most notably Saizo Kirigakure. At the same time he acknowledges Saizo as a strong ninja and trusts him. His main weapons are two knives. Our Brave Ninja Sarutobi Spiked Knife is just like Sasukes with its spiked knuckle over a nylon wrapped oval handle. The large unsharpened blade comes down in a slight curve with silver waves down its spine. Grab your Brave Ninja Sarutobi Spiked Knife and join the ninja squad. Overall Length: 20.5 Inches Blade Length: 12.25 Inches Blade Thickness: 4mm, Tapered Blade Material: Carbon Steel, Oiled for Preservation Blade Finish: Satin and Black Finish Handle Length (inside): 4.75 Inches Handle Materials: Steel Nylon Wrapped



High quality

We take pride in the quality and originality of our products

Fast Delivery

Our products reach our clients in a timely and discreet manner

24/7 support

We provide support for all customers at all times

14 - Day Returns

If there are any defects upon arrival, do return the weapon and be refunded in full.