1860 Saber American Cavalry Sword

35 in Fantasy Sword PK2460-355 Fantasy Sword & Chain, All metal construction Overall Length: 35 , Shaft is 1 diameter polished stainless steel Handle Width 8-3/4 Blade width 4, Blade is not sharp Chain is approximately 24 long Handle Rotates on shaft and has foam grip Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.

This sword is constructed of stainless steel with a factory edge. The guard and wooden handle have a glossy red finish to match the wooden scabbard. Overall length is 41 inches.

Wild Boar Hunting Sword made of German Steel and a Elk handle, hand Crafted in the USA. 22" blade 32" overall comes with a leather scabbard

1045 Carbon Steel  Blood Groove Samurai Katana     SpecificationsOverall Length: 40.25 InchesBlade Length: 27.75 InchesBlade Material: 1045 Carbon SteelBlade Thickness: 7mmTang: Full Length Steel TangSharpness & Functionality: Sharp, 8.5/10, Battle ReadyTsuba: Solid Steel, Black Oxide FinishHandle Length: 10.75 InchesHandle: Solid Hardwood, White Faux Rayskin, Black Ito WrapSaya: Hardwood, Black  FinishIncludes: Katana Sword Bag

3 PIECE SAMURAI SWORD SET 3 Piece Samurai Sword Set 3Pcs Black Samurai Sword Set Carbon Steel Blade Japanese Inscriptions Black Wood Scabbard Includes Wood Display Stand You must be at least 18 years old to purchase products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local, state and federal laws is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.

80 Inch Overall The Grim Reaper Death Scythe. Scythe GRIM REAPER'S DEATH SCYTHE. With its pole extending an enormous 80" tall, this scythe has a razor sharp carbon steel curve blade extending 23 1/2" long. The Grim Reaper's Death Scythe has an antiqued looks which give it the aged looks. Specifications: Overall length: 80" Blade Length: 23 1/2" Blade Material: Carbon Steel, extremely sharp Pole Material: Wooden

3 PIECE SAMURAI SWORD SET 3 Piece Samurai Sword Set 40" Overall (Katana) 4Mm Thickness Stainless Steel Blade Black & Green Cord Wrapped Handle Includes Display Stand Includes Cloth Wrapped Scabbard And Zinc Alloy Fittings You must be at least 18 years old to purchase products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local, state and federal laws is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.

As the rival of Saizo and head of Sanada's ninja squad, Sasuke uses this Brave Ninja Sarutobi Spiked Knife while being a proud Koga warrior against the Ten. Sasuke Sarutobis loyalty towards Yukimura is strong and unwavering, and he will not forgive anyone who soils Sanada's name. He hates Iga Ninja, most notably Saizo Kirigakure. At the same time he acknowledges Saizo as a strong ninja and trusts him. His main weapons are two knives. Our Brave Ninja Sarutobi Spiked Knife is just like Sasukes with its spiked knuckle over a nylon wrapped oval handle. The large unsharpened blade comes down in a slight curve with silver waves down its spine. Grab your Brave Ninja Sarutobi Spiked Knife and join the ninja squad. Overall Length: 20.5 Inches Blade Length: 12.25 Inches Blade Thickness: 4mm, Tapered Blade Material: Carbon Steel, Oiled for Preservation Blade Finish: Satin and Black Finish Handle Length (inside): 4.75 Inches Handle Materials: Steel Nylon Wrapped

1840 CSA/NCO Confederate Non-Commisioned Officer Short Sword with Steel scabbard 1840 United States Army NCO Sword with Steel scabbard. 1840 United States Army NCO Sword with Steel scabbard The United States Army Non-Commissioned Officer sword was adopted by the War Department in 1840. The Army Noncommissioned Officer Sword has been worn by Army sergeants for over 100 years. It is primarily used today for honor guards and presentations such as PCS and change of command. Our swords have been purchased by the Army NCOA ( Non Commissioned Officers Academy) as well as National Guard and US Army military bases around the world. Specifications Overall Length: 37 Inches Blade Length: 31.5 Inches Blade Material: Steel Handle Material: Brass Scabbard: Metal Replica of the Model 1840 United States Army NCO Sword

Unmarked 1832 Foot Artillery sword. The 19" blade is in very good condition with only very minor pitting scattered about. The solid brass handle is of very good quality showing a nice even patina. The scabbard is also in very good condition and seldom found with this model sword. The leather is excellent with typical age cracks. The brass tip has a couple of small dings or dents but otherwise far above average condition. As mentioned before, neither the blade, hilt, handle or scabbard have any markings whatsoever.

This sword is only for those that fight for Valhalla. With a 24 inch blade forged from Damascus steel, you can definitely say that this is no run-of-the-mill Lang Saex sword. This high-quality 1095/15N20 Damascus has been between 400-520 layers, and has a Rockwell rating of 58-60 HRC. Because of the unique shape of this single edged sword, it can primarily be used as a stabbing weapon, but is just as effective at slashing. The full tang runs in the centerline of the blade, and inserted into a Durable sheesham wood handle that is stained a rich mahogany brown. The guard and pommel are both made of pure brass, with traditional Norse inscriptions etched into them. The included genuine black leather sheath comes with beautiful gold Viking inscriptions as well, including that of a serpent, and is meant to be worn over the shoulder. Overall Length: 32 inches, Blade Length: 24 inches

Triple Ninja Sword Set includes 3 blades: a 26" sword, a short sword that is dagger-sized at 17.75", a knife blade that measures about 12.25", and a nylon sheath that holds all three blades featuring an adjustable shoulder strap. Each blade is sharpened on both edges and heat treated to just the right hardness. The finish is known as titanium and is iridescent or multi-colored, like oil on water in the sunlight. All of the blades in this Triple Ninja Sword Set have weight reducing cutouts and nylon cord wrapped handle grips. Specifications Sword Overall Length: 26 Inches Sword Blade Length: 17.25 Inches Blade Material: 440A Stainless Steel Sword Blade Thickness: 3mm Tang: Full Tang, Seamless w Blade Sharpness & Functionality: Very Sharp, Solid 3mm Thick, Full Tang Blade Features: Double Edged, Weight Reducing Mid-Length Cutouts Sword Handle Length: 7.5 Inches, 6.5" Grip Handle: Steel Tang, Wrapped w Black Nylon Cord Other Features: Mini Sword Guard Dagger Overall Length: 17.75 Inches Dagger Blade Length: 11 Inches Dagger Handle Length: 5.85 Inches Knife Overall Length: 12.25 Inches Knife Blade Length: 6.75 Inches Knife Handle Length: 4.5 Inches Sheath: Free Nylon Sheath, Adjustable Shoulder Strap, Inner Stiff Liner Blade Finish: Multi-Colored, Titanium Finish, Heat Treated Includes: Sword, Knife, Dagger-sized Sword, Nylon Sheath w Shoulder Strap.