Buy guns online - Guns for sale

Showing 73 - 96 of 340 Weapons
MOSSBERG PATRIOT
buy guns online
ID: 13733024

$500$450

Mk18
buy guns online
ID: 76475379

$25000$2000

MARLIN XT-17
buy guns online
ID: 24704770

$400$350

J.P. SAUER & SOHN K98
buy guns online
ID: 16855426

$9500$9000

h$k sp5k pdw
ID: 26065669

$3000$2500






AMMO

Hornady Vintage Match Ammunition 30-06 Springfield (M1 Garand) 168 Grain ELD Match Box Of 20

Hornady Vintage Match Ammunition Designed specifically for use in the M1 Garand, this ammunition is custom-grade from the factory, loaded to stringent specifications to guarantee proper ignition and provide consistent, match-winning, pinpoint accuracy, shot after shot. Performs as well or better than handloads. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases. Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. Hornady Vintage Match Ammunition Product Information Cartridge 30-06 Springfield Grain Weight 168 Grains Quantity 20 Round Muzzle Velocity 2710 Feet Per Second Muzzle Energy 2739 Foot Pounds Bullet Style Polymer Tip Bullet Brand And Model Hornady ELD Match Lead Free No Case Type Brass Primer Boxer Corrosive No Reloadable Yes G1 Ballistic Coefficient 0.523 Sectional Density 0.253 Test Barrel Length 24 Inches Velocity Rating Supersonic Country of Origin United States of America Hornady Vintage Match Ammunition SHIPPING DETAILS: WARNING: PRIMERS, SMOKELESS POWDERS, PYRODEX, TRIPLE SEVEN MAY ONLY BE PURCHASED BY ADULTS. CHECK YOUR LOCAL AND STATE LAWS FOR THE LEGALITY OF ORDERING AND POSSESSING THESE PRODUCTS. PRIMERS AND SMOKELESS POWDERS ARE RESTRICTED IN WASHINGTON, DC. RESIDENTS OF CT, MA, NY, AND NJ MUST CHECK LOCAL LAWS FOR RESTRICTIONS BEFORE ORDERING ANY GUNPOWDER PRODUCTS, AMMO, OR PRIMERS. FOR SAFETY REASONS, WE DO NOT ACCEPT RETURNS ON THESE PRODUCTS. DUE TO SPECIAL SHIPPING REQUIREMENTS OF HAZMAT PRODUCTS, FEDEX AND UPS ASSESS A HAZARDOUS MATERIAL FEE PER ORDER OF THESE PRODUCTS. POWDER AND PRIMER SHIPPING (HAZMAT) FEES: APPLIES TO PRIMERS AND POWDER IN THE CATALOG. HAZMAT RATES ARE PER PACKAGE. YOU MAY RECEIVE UP TO 70 LBS. PER PACKAGE AND MAY COMBINE POWDER AND PRIMERS, BUT POWDER HAS TO BE LIMITED TO NO MORE THAN 32 LBS. PER PACKAGE. POWDER CANNOT BE SHIPPED BY AIR. OUR SALES ASSOCIATES CAN HELP YOU WITH ANY QUESTION

AMMO

Hornady BLACK Ammo 450 Bushmaster 250gr FTX – Box Of 20

Hornady BLACK ammunition features versatile loads optimized for excellent performance from America’s favorite guns. Loaded with legendary Hornady bullets, Hornady BLACK ammunition is designed to fit, feed and function in a variety of platforms. Direct impingement, gas piston, suppressed, unsuppressed, inertia, bolt, pump, supersonic, subsonic, rifle, mid-length, carbine or pistol. Hornady BLACK ammunition delivers superior performance for a variety of applications. – High Quality Cases, Primers and Propellant – Versatile Hornady bullet options – Optimized performance from various platforms Caliber: 450 Bushmaster Grain Weight: 250 Grains Muzzle Velocity: 2200 Feet Per Second Muzzle Energy: 2686 Foot Pounds Bullet Style: Polymer Tip Bullet Brand And Model: Hornady FTX Lead Free: No Case Type: Brass Primer: Boxer Corrosive: No Reloadable: Yes G1 Ballistic Coefficient: 0.21 Sectional Density: 0.175 Test Barrel Length: 20 Inches Velocity Rating: Supersonic Country of Origin: United States of America Box of 20

AMMO

Lehigh Defense XD Ammunition 380 ACP 68 Grain Xtreme Defense Lead Free Box of 20

Lehigh Defense XD Ammunition features the proven Xtreme Defense bullets. This high quality ammunition is perfect for hunting or pest control. The lead free projectiles are safe to use in any environment with no risk of lead contamination. This ammunition is new production, non-corrosive, in boxer-primed, reloadable brass cases. The Xtreme Defense (XD) Technology is based on the popular Xtreme Penetrator product line. The design goal was to achieve the same barrier performance and massive permanent wound cavity and reduce the penetration depth to coincide with an individual's personal comfort level. It was a goal Lehigh did not meet; it was a goal they blew out of the water! The XD Bullet has an optimized nose flute, total weight, and velocity to achieve a penetration depth range of 18 inches with a permanent wound cavity (PWC) that is just simply enormous; no other expanding hollowpoint comes close to achieving anywhere near this diameter and volume. Not only is the PWC over 100% larger than any other expanding bullet, it is near barrier blind, ignoring wallboard, sheet metal, and automotive glass. Lehigh Defense was able to accomplish this quantum leap in terminal performance at the same time while reducing recoil. The terminal performance achieved is quickly approaching that of 5.56 rifle performance and that is an incredible feat. Suppressor Safe — The projectile is machined from solid bar stock. This is not a frangible bullet produced from powdered metal. Features A permanent wound cavity (PWC) that is 2 times greater than any expanding bullet Radial flutes that force the hydraulic energy inward to build pressure Minimal surface area to increase the force at the point of contact and sharp cutting edges that defeat barriers Lehigh Defense Made In United States of America warning-iconWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

SHOTGUNS

Mossberg 590S Shockwave Pump Action Shotgun

The Mossberg 590 Shockwave Shotgun is a unique and powerful firearm. The "Raptor Grip", or bird's head grip is made of a comfortable synthetic material for a perfect look and feel. It also features a corn-cob style forend for a tactical design, with a strap for easy carry. A feature on all Mossberg pump-actions, the ambidextrous top-mounted safety is easily reached and operated by left or right-handed shooters. The 590 Shockwave features a convenient clean-out tube magazine cap, a front bead sight, and strapped forend to keep shooter’s lead hand clear of the muzzle. Features Ability to cycle 1.75?, 2.75?, or 3? shells Matte Blue Finish Corn-Cob Forend with Strap Product Information Cartridge 12 Gauge Capacity 8 Round Shell Length 3" Overall Length 26.37 Inches Barrel Length 14.375 Inches Hand Right Chokes Included Cylinder Youth No Action Type Pump Action Stock Type Bird's Head Stock Color Black Safety Tang Sights Bead Front Barrel Finish Blued Ported No Frame Material Steel Interchangeable Choke No Frame Finish Matte Blue Country of Origin United States of America Choke Type Fixed

RIFLES

DANIEL DEFENSE M4 V5 S 556 DDM4 V5S RIFLE 14.5

The Daniel Defense M4, V5S Mil Spec+ is a new option within the V5 series, one of the most popular series Daniel Defense has ever produced. The DDM4v5S (Short) is built around a 14.5” Cold Hammer Forged, Government profile barrel with a smooth shooting and reliable Mid-length gas system. The barrel is fitted with an extended Daniel Defense Flash Suppressor, which is pinned and welded to reach the NFA required 16” barrel length. It also carries the lightweight and ergonomic DDM4 Rail 12.0, perfectly adapted for end-users who need valuable rail real estate for accessories. QD Swivel attachment points are integrated to the front and back on both sides of the rail for fully ambidextrous sling attachment. This compact and fast-handling rifle also comes equipped with the rugged and comfortable Daniel Defense Buttstock, Pistol Grip, and Vertical Grip and is finished in Daniel Defense Mil Spec+ Cerakote. ITEM INFO CATEGORY: Rifles TYPE: complete rifle BRAND: Daniel Defense MODEL: DDM4 V5 CALIBER: 5.56×45 mm NATO TECH SPECS CAPACITY: 32 + 1 WEIGHT: 39 MATERIAL: Black SIGHT: PURPOSE: Semi Auto Rifle

RIFLES

Mk18

Buy Mk18 Online Features Aluminum alloy fully licensed Daniel Defense receiver with stamped Daniel Defense markings Aluminum alloy licensed Daniel Defense MK18 20mm rail, ideal for grenade launchers, optics and other 20mm accessories G&P ver2 metal gearbox w/ pre-installed GATE ASTER Programmable MOSFET App-based control station gives you total control over your AEG Adjustable length of pull CRANE style stock Polymer flip up front and rear sights 8mm bearings for improved durability and lifespan G&P M140 high torque motor

KNIVES & SWORDS

80 Inch Overall The Grim Reaper Death Scythe

80 Inch Overall The Grim Reaper Death Scythe. Scythe GRIM REAPER'S DEATH SCYTHE. With its pole extending an enormous 80" tall, this scythe has a razor sharp carbon steel curve blade extending 23 1/2" long. The Grim Reaper's Death Scythe has an antiqued looks which give it the aged looks. Specifications: Overall length: 80" Blade Length: 23 1/2" Blade Material: Carbon Steel, extremely sharp Pole Material: Wooden

KNIVES & SWORDS

The Remnants Liner Lock Knife

A perfect tool to have on hand for the next attack, this unique liner lock knife features dual razor sharp blades. Sporting a bio hazard symbol and Killer emblem, each blade is constructed from 440 stainless steel with a titanium finish and comes with ambidextrous thumb studs to allow for swift and quick deployment. The aluminum handle features a black metallic textured finish and the end of the pommel has an extra-large ring hole for a more secure grip. The finger ring can also be used in a punching motion as an extra defense mechanism and adding even more functionality; is designed to also be used as a bottle opener in a pinch. Double wall reinforced, the handle houses the liner locking mechanism to lock the blades in place while the spine offers a supporting bar with a thumb rig for extra support. The knife is equipped with a strong and sturdy pocket clip which is raised to allow for better ease of use. Overall Length: 10 Inches Blade Length: 4 Inches Blade Material: Stainless Steel, Titanium finish, Silver edge Blade Style: Dagger point, Double edge Handle Length: 6 Inches Handle Material: Aluminum, Black Metallic finish Includes: Pocket Clip and Bottle Opener

HANDGUNS

RUGER AR-556 PISTOL AMERICAN FLAG

The Ruger AR-556 Pistol features a lower receiver that is fitted with an adjustable pistol stabilizing brace to aid in accuracy, balance and recoil management, the slim 9" handguard is free-floating for accuracy and provides enhanced ergonomics and support. Magpul M-LOK accessory attachment slots along the 3:00, 6:00 and 9:00 positions. Made from aerospace-grade 7075-T6 aluminum forging, the flattop upper receiver includes a forward assist, dust cover and brass deflector. The bolt is machined from 9310 alloy steel and is shot peened and pressure (proof) tested to ensure strength, structural integrity, and durability. The twist rate stabilizes bullets from 35 to 77 grains and the 5.56 NATO chamber allows the use of both 5.56 NATO and .223 Rem. ammunition. M4 feed ramps provide improved reliability. A matte black oxide finish on the exterior of the bolt carrier provides corrosion resistance. A Ruger flash suppressor is provided, and the threaded barrel allows for standard muzzle accessories to be installed. Includes a 30rd Magpul PMAG.

MACHINE GUNS

Clayco Underfolder AK-47/s 7.62×39

Ive got one of the first versions of Clayco Underfolder AK-47/s 7.62×39 ever imported. Min Shan factory underfolder in 7.62×39. For sale or trade. In great shape, lightly used. I only put about 70 rounds through it. Outer cosmetic appearance is very good. numbered parts all match of course. Comes with Chinese sling pictured, 1 chinese flatback mag and a nice condition russian bakelite mag Mainly interested in trading at this time, will sell for 28000 or trade, no lowballers its highly unlikely you will find these for much cheaper ever again, Will sell clayco for 28000 plus transfer cost or shipping.

SHOTGUNS

Browning Citori Hunter Grade I Over/Under Shotgun

The Browning Citori Hunter Grade I Shotgun is a reliable over and under shotgun with gloss finish metalwork and gold enhancement on receiver. It features a satin finish Grade I American walnut stock with Inflex recoil pad, silver bead front sight and three flush choke tubes included. If you have ever picked up an over and under shotgun and thought it was just too nice to take afield, the Citori Hunter Grade I solves this conundrum. Mind you, not a single corner has been cut in the production of this working-grade gun; its biggest feature is the Citori reputation for durability and handling performance. The Grade I walnut has a smooth satin finish and top notch Inflex recoil pad for comfort. The receiver, barrels and other exterior metalwork all have a handsome blued finish. Gold enhancement on the receiver is your reminder that you're hunting with a Browning. Features Gloss finish metalwork with gold enhancement on receiver Versatile 50/50 POI is ideal for hunting Satin finish Grade I American walnut stock Inflex recoil pad Silver bead front sight Product Information Cartridge 410 Bore Capacity 2 Round Weight 6.875 Pound Shell Length 3" Overall Length 43 Inches Barrel Length 26 Inches Hand Right Chokes Included Imp Cyl, Mod, Full Rib Ventilated Youth No Action Type Over/Under Stock Type Field Stock Material Wood Stock Color Black Walnut Trigger Type Single, Selectable Safety Tang Sights Bead Front Barrel Finish Blued Ported No Frame Material Steel Interchangeable Choke Yes Frame Finish Blued Length of Pull 14.25 Inches Choke Type Invector Plus

MACHINE GUNS

Catco Sterling 9mm SMG

The Catco Sterling 9mm SMG submachine gun is constructed entirely of steel and plastic and has a shoulder stock, which folds underneath the weapon. There is an adjustable rear sight, which can be flipped between 100 and 200-yard settings. Although of conventional blowback design firing from an open bolt, there are some unusual features: for example, the bolt has helical grooves cut into the surface to remove dirt and fouling from the inside of the receiver to increase reliability. There are two concentric recoil springs that cycle the bolt, as opposed to the single spring arrangement used by many other SMG designs. This double-spring arrangement significantly reduces “bolt-bounce” when cartridges are chambered, resulting in better obturation, smoother recoil, and increased accuracy. Additionally, the Sterling uses a much-improved (over the Sten) 34-round curved double-column feed box magazine, which is inserted into the left side of the receiver. The magazine follower, which pushes the cartridges into the feed port, is equipped with rollers to reduce friction. The bolt feeds ammunition alternately from the top and bottom of the magazine lips, and its fixed firing pin is designed so that it does not line up with the primer in the cartridge until the cartridge has entered the chamber. The Sterling employs a degree of what is known as Advanced Primer Ignition, in that the cartridge is fired while the bolt is still moving forward, a fraction of a second before the round is fully chambered. The firing of the round thus not only sends the bullet flying down the barrel but simultaneously resists the forward’s movement of the bolt. By this means it is possible to employ a lighter bolt than if the cartridge was fired after the bolt had already stopped, as in simple blowback, since the energy of the expanding gases would then only have to overcome the bolt’s static inertia (plus spring resistance) to push it back again and cycle the weapon; whereas in this arrangement some of this energy is used up in counteracting the bolt’s forwards momentum as well, and thus the bolt does not have to be so massive. The lighter bolt makes not only for a lighter gun, but a more controllable one since there is less mass moving to and fro within it as it fires. The suppressed version of the Sterling (L34A1/Mk.5) was developed for covert operations. This version uses a ported barrel surrounded by a cylinder with expansion chambers. The Australian and New Zealand SAS regiments used the suppressed version of the Sterling during the Vietnam War. It is notable for having been used by both Argentinian and British Special Forces during the Falklands War. A Sterling was used by Libyan agents to kill WPC Yvonne Fletcher outside the Libyan Embassy in London, which sparked the 1984 siege of the building. The Sterling has a reputation for excellent reliability under adverse conditions and, even though it fires from an open bolt, has good accuracy. With some practice, it is very accurate when fired in short bursts. While it has been reported that the weapon poses no problems for left-handed users to operate, it is not recommended without the wearing of ballistic eye protection. The path of the ejected cartridge cases is slightly down and backward, so mild burns can occasionally be incurred by left-handed shooters. A bayonet of a similar design as that for the L1A1 Self-Loading Rifle was produced and issued in British Army service but was rarely employed except for ceremonial duties. Both bayonets were derived from the version issued with the Rifle No. 5 Mk I “Jungle Carbine”, the main difference being a smaller ring on the SLR bayonet to fit the rifle’s muzzle. When mounted, the Sterling bayonet was offset to the left of the weapon’s vertical line, which gave a more natural balance when used for bayonet-fighting. For a right-handed shooter, the correct position for the left hand while firing is on the ventilated barrel-casing, but not on the magazine, as the pressure from holding the magazine can increase the risk of stoppages, and a loose magazine can lead to dropping the weapon. The barrel-casing hold provides greater control of the weapon, so the right hand can intermittently be used for other tasks. A semi-circular protrusion on the right-hand side of the weapon, approximately two inches from the muzzle, serves to prevent the supporting hand from moving too far forward and over the muzzle.