Alien Invader Plasma Battle Axe w/ Dagger

Alien Invader Plasma Battle Axe W/ Dagger

Item ID:

21700806

UPC:

2738740985

$55$80

Availability - In Stock

PRODUCT INFO

Category:

Knives & swords

Type:

sword

Brand:

Alien Invader Plasma Battle Axe w/ Dagger

Model:

Alien Invader Plasma Battle Axe w/ Dagger

Caliber:

3

TECHNICAL SPECS

Capacity:

1

Weight:

3

Material:

steel

Sight:

fixed

Purpose:

weapon

This futuristic piece is equipped with a 9 3/4" fantasy blade constructed from stainless steel. The ABS impact resistant handle features cast aluminum accents with antique silver finish. An added feature is the small dagger which easily removes at the push of a button. An out of this world experience. 20 1/2" overall

Write a review




37" MANUAL STICK SHIFT SWORD CANE. 37" OVERALL LENGTH BROWN MANUAL STICK SHIFT AS HANDLE 12" 440 STAINLESS STEEL SWORD BLADE INSIDE



36.75" BRASS FINISH SKULL SWORD CANE. 440 stainless steel blade. Seen its camouflaged conceilled carry cane, it is rather undetected and safe. With a blade so thin that slides out of it hiding spontaneously, this is quick weapon to use again any opponent.



This sword is only for those that fight for Valhalla. With a 24 inch blade forged from Damascus steel, you can definitely say that this is no run-of-the-mill Lang Saex sword. This high-quality 1095/15N20 Damascus has been between 400-520 layers, and has a Rockwell rating of 58-60 HRC. Because of the unique shape of this single edged sword, it can primarily be used as a stabbing weapon, but is just as effective at slashing. The full tang runs in the centerline of the blade, and inserted into a Durable sheesham wood handle that is stained a rich mahogany brown. The guard and pommel are both made of pure brass, with traditional Norse inscriptions etched into them. The included genuine black leather sheath comes with beautiful gold Viking inscriptions as well, including that of a serpent, and is meant to be worn over the shoulder. Overall Length: 32 inches, Blade Length: 24 inches



1045 Carbon Steel  Blood Groove Samurai Katana     SpecificationsOverall Length: 40.25 InchesBlade Length: 27.75 InchesBlade Material: 1045 Carbon SteelBlade Thickness: 7mmTang: Full Length Steel TangSharpness & Functionality: Sharp, 8.5/10, Battle ReadyTsuba: Solid Steel, Black Oxide FinishHandle Length: 10.75 InchesHandle: Solid Hardwood, White Faux Rayskin, Black Ito WrapSaya: Hardwood, Black  FinishIncludes: Katana Sword Bag



This is one solid wooden construction sword from top to bottom. The cross-guard is a stylized cat's head, with two triangles on the top half curving into ear-points and the bottom half tapering down into a single point. The blade is made from wood, painted in silver followed by the wooden handle wrapped with nylon cord. The scabbard is all wood with a black high gloss lacquer finish with a brown bull horn knot. This sword is perfect for cosplay, conventions or just plain pretending. Specifications: Overall Length: 39.5" Blade Length: 27" Handle Length: 10"



Circa 1810-1850 13" blade Hilt is made of carved Bog Oak Completely adorned in highly engraved sterling silver Front of sheath has a knife and fork each approximately 5 3/4" length Frog has sterling silver accents and excellent condition leather Excellent overall condition and what a great representation of this rare blade Originally used blade down in the "ice pick" grip to make best use of the type of blade



Yo, ho ho! What better way to show off your swash-buckling pirate attire than adding the finishing touch that is a ravishing sword belt? The belt is handmade from brown leather, adorned with circular brass studs and 3 signature skull and cross bone studs, with a large square buckle to hold the belt in place. Though this belt is made for a smaller cutlass sword, the sword frog attached to the belt has two adjustable straps with pure brass buckles to fit swords of various shapes and sizes.



Wild Boar Hunting Sword made of German Steel and a Elk handle, hand Crafted in the USA. 22" blade 32" overall comes with a leather scabbard



American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished.



. The DAGGER style knife is 8.25 inches OVERALL with 4 inch DAGGER BLADE signed on bolster side by the knife maker, and on "VINTAGE IVORY" handle by the scrimshander. The bolster features a deep relief scroll engraving on one side , with a beautiful feminine face on the other side of bolster. All scrimshaw on Ben Shostle engraved items are done by his daughter Benita Bonshire, super talented, schooled artist, as seen in this beautifully scrimmed nude. NO SHEATH. Included is a Ben Shostle Arms Engraver pamphlet, which contains pictures of Ben's engravings, scrimshaws, by his daughter, and information about the artists. This knife has Never been used or carried. Must be 18 years old to buy this knife..



2-piece Chinese Hook Sword Set Silver - XL1112 Dominate your dojo with these Chinese twin hook swords! Martial arts enthusiasts will enjoy using these traditional weapons! Each sword measures 33 1/4" overall and offers one-piece stainless steel construction and authentic pattern design with a black finish. Corded wrapped grip on handles One piece stainless steel construction Fully functional set of two 33 1/4" overall legnth of each sword Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished. Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



Other Product details

Gil Hibben, famous for his unique knife and blade designs, custom crafted this knife especially for United Cutlery in 1991 as the second in his annual Fantasy Series offerings. Mirror polished 420 stainless steel blade split into two sections Gil's personal stamp etched on the blade Silver wire-wrapped hilt Genuine leather sheath 5 1/2" blade length 11 1/4" overall length



American Civil War era hand-made cavalry sword. The 34.25 inch blade is crafted from thick high quality steel to replicate the saber and is 4mm thick. It has a factory edge and has been mirror polished down to perfection. The Seal of the United States has been engraved into the blade, along with the designs representing the pride and courage of those who fought for their heritage. On one side of the blade, the words E Pluribus Unum are engraved, and the other side has U. S. engraved into the steel. The handle is wrapped in black leather and features the authentic wound wire that is traditionally expected on a sword of this caliber. Weight has been added to the mirror polished brass pommel to balance the overall handling of the sword. An authentic hand made steel sheath is included with this gorgeous sword. The sheath features the standard loops for securing it to your effects and displaying it properly. Overall Length: 40.5 Inches. Blade Length: 34.25 Inches. Blade: Saber, Factory Edge, Mirror Polished, High Quality Steel, 4mm Thick. Handle: 6 Inches, Black Leather Wrap, Golden Wire Wound, Brass & Steel Tang Core. Guard: Polished Golden, Brass, Full Wrap. Pommel: Polished Golden, Brass, Weighted. Sheath: 36.25 Inches, Hand Made, High Quality Steel, Looped. Engraved: "US", "E Pluribus Unum." Features: 100% Handmade, 100% Polished.



The blade is the first thing you will notice with the chaotic ocean current patterns that are just exquisite. It is constructed from premium quality Damascus that is made from 1095/15n20 alloy steel. The Rockwell rating is 58-60 with 176 true blade layers. The blade tapers towards the tip with parallel edges that come sharp. The cross guard is made from steel with an etching of an Odins eye weave. Odins eye is a symbol of perception and worldly understanding; in other words wisdom. The grip is just as eye catching as the blade as it is made from high quality materials like hand carved bone and stained wood with brass spacers. The triple lobe pommel is attributed to the Anglo Saxons. The center lobe being quite bulbous compared to the two outside lobes. Similar etching is on the pommel matches the cross guard. Included is a sheath with a back strap that is made from premium leather that has been hand sewn. This blade was made for nothing more than battle. Overall Length: 32.25 Inches.



 38.5" OVERALL RED SAMURAI SWORD WITH ATTACHED THROWING KNIFE    Samurai Sword 38.5" OVERALL 28" 4MM BLADE, STAINLESS STEEL SATIN FINISHED BLADE 9.5" RED CORD WRAPPED HANDLE THROWING KNIFE ATTACHED TO SCABBARD INCLUDES BLACK ALUMINUM SCABBARD & ZINC ALLOY TSUBA



These guards are made out of steel and come with a beautiful wooden display gift box with a red silk layer inside. The box is made from wood and has a black imprint of the guard outside on the cover. This item is a perfect gift for all serious sword collectors.



300 Spartan Warrior Replica Sword - BK1388 This is an exact replica of the sword carried by the famed King Leonidas and his 300 Spartans at the Battle of Thermopylae. This massive sword measures 34 1/2" overall and breathes strength. The 26" heat-forged blade is heat tempered from solid carbon steel and is nearly 1/2" thick. The leather wrapped handle is contoured and surrounded by the distinctive extended guard and pommel. Forged steel blade is 1/2" thick Leather wrapped handle Distinctive blade shape & design Please note: You must be at least 18 years old to purchase the products on this website. Swords, Knives and Daggers, its employees or associated companies assume no responsibility for injury, damage or loss incurred by use of any merchandise sold on this website. Compliance with local , state and federal laws and/or statutes is the responsibility of the buyer. Purchase of merchandise from Swords, Knives, and Daggers implies agreement to the above statements by buyer.



80 Inch Overall The Grim Reaper Death Scythe. Scythe GRIM REAPER'S DEATH SCYTHE. With its pole extending an enormous 80" tall, this scythe has a razor sharp carbon steel curve blade extending 23 1/2" long. The Grim Reaper's Death Scythe has an antiqued looks which give it the aged looks. Specifications: Overall length: 80" Blade Length: 23 1/2" Blade Material: Carbon Steel, extremely sharp Pole Material: Wooden



 9in Ninja Set of 3 White Throwing Knives Red  Set of three throwers! 9in Set is an excellent choice for throwing and putting on display. In the anime and manga, often explosive spell-bound tags are attached to the loops and the throwing knives, are stuck to something. The 9in knife Set comes With a Nylon Sheath that fits all three. Handle is wrapped with Black Cordage. 440 Stainless steel blade with flat black ''ninja'' finish.*Must be 18 years or older to buy* Specifications Overall Length: 9 Inches Blade Length: 5.3 Inches Blade Material: 440 Stainless Steel Blade Thickness: 3mm Tang: Full Tang Sharpness & Functionality: Very Sharp, Great for Throwing & Display Blade Features: Double Edge, Spear Point, Ridgeline Handle Length: 3.75 Inches Handle: Cord Wrapped Other Features: Finger Loop Includes: Black Nylon Sheath, Triple Pouch Finish: Flat Black, White



High quality

We take pride in the quality and originality of our products

Fast Delivery

Our products reach our clients in a timely and discreet manner

24/7 support

We provide support for all customers at all times

14 - Day Returns

If there are any defects upon arrival, do return the weapon and be refunded in full.