BERETTA ARMS ARX100

The legendary FN SCAR® 20S is upgraded with Non-Reciprocating Charging Handles. Perfectly calibrated for long-range fire, the FN SCAR 20S delivers surgical precision, with an enhanced set of controls to enable any shooting position or optic choice. The rugged, monolithic upper receiver with full-length MIL-STD-1913 rail provides more space for rail-mounted accessories, and a precision buttstock fits any shooter with adjustable length of pull and cheek rest height. The FN SCAR 20S is the benchmark for long-range precision from a gas-driven piston platform, delivering a highly accurate and proven design for target shooting and law enforcement applications. Product follows USA specifications CALIBER: 6.5 Creedmoor or 7.62×51 mm OPERATION: Short-stroke gas piston MAG CAPACITY: 10 Rd. BARREL LENGTH: 20? OVERALL LENGTH: 41”-42.8” WEIGHT: 11.6 lbs. PRIMARY FEATURES New bolt carrier assembly with NRCH enables any shooting position or optic choice, reduces felt recoil Extended monolithic receiver Short-stroke gas piston RECEIVER Hard-anodized monolithic aluminum MIL-STD-1913 accessory rails at 3, 6, 9, and 12 o’clock positions BARREL Cold hammer-forged, chrome-lined, free-floating heavy contour barrel TRIGGER Two-Stage Match trigger (Geissele® “Super SCAR”) STOCK Precision adjustable for LOP and comb height Adjustable cheekpiece Hogue® rubber grip with finger grooves OPERATING CONTROLS Dual, ambidextrous charging handles remain static under fire, user swappable left/right Ambidextrous safety lever and magazine release Enlarged trigger guard for easier access when wearing gloves Composite polymer trigger module MAGAZINE Uses FN SCAR® 17S magazines Steel magazine body Low-friction follower

The 110 Precision takes Savage's legendary 110 action and makes it even more dynamic. With a custom stock designed by the accuracy experts at Modular Driven Technologies (MDT), the 110 Precision is fully customizable. From the adjustable comb height and length of pull, to the capabilities of its AccuTrigger this aluminum framed rifle is setup for exacting performance.

MARLIN FIREARMS MODEL XT-17 .17HMR RIFLE | Marlin Firearms Co. Model XT-17 .17HMR Bolt Action Rifle. The barrel is stamped “Marlin Firearms Co. Mayfield, KY. Model XT-17 .17 HMR”. Blued finish. Composite stock. Two external magazines, Deerfield Model 21031 scope UPC ECOM00150209 Caliber .17 HMR Finish SYNTHETIC Capacity 5+1 ROUNDS Weight NOT SPECIFIED Action BOLT ACTION Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 22 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

Benelli R1 .300 Win Mag 20? Barrel and Bolt Assembly. Usually only found on custom-made rifles the R1’s barrel is cryogenically frozen to -300° F which changes the steel at the molecular level. The result, better barrel harmonics providing superior accuracy. Includes the barrel and bolt assembly Barrel is drilled and tapped for both iron sights and scope bases Caliber: .300 Win Mag Barrel Length: 20? Gloss Blued finish Manufacturer: Benelli ITEM INFO CATEGORY: Rifles TYPE: Semi-Automatic BRAND: Benelli MODEL: R1 CALIBER: 300 WSM TECH SPECS CAPACITY: 10 WEIGHT: 7 MATERIAL: Black/Wood SIGHT: Drilled and tapped. PURPOSE: Semi Auto Rifle

The Daniel Defense M4, V5S Mil Spec+ is a new option within the V5 series, one of the most popular series Daniel Defense has ever produced. The DDM4v5S (Short) is built around a 14.5” Cold Hammer Forged, Government profile barrel with a smooth shooting and reliable Mid-length gas system. The barrel is fitted with an extended Daniel Defense Flash Suppressor, which is pinned and welded to reach the NFA required 16” barrel length. It also carries the lightweight and ergonomic DDM4 Rail 12.0, perfectly adapted for end-users who need valuable rail real estate for accessories. QD Swivel attachment points are integrated to the front and back on both sides of the rail for fully ambidextrous sling attachment. This compact and fast-handling rifle also comes equipped with the rugged and comfortable Daniel Defense Buttstock, Pistol Grip, and Vertical Grip and is finished in Daniel Defense Mil Spec+ Cerakote. ITEM INFO CATEGORY: Rifles TYPE: complete rifle BRAND: Daniel Defense MODEL: DDM4 V5 CALIBER: 5.56×45 mm NATO TECH SPECS CAPACITY: 32 + 1 WEIGHT: 39 MATERIAL: Black SIGHT: PURPOSE: Semi Auto Rifle

This is a First gen, BROWNING CITORI 4Gauge skeet set. I’m original carry case. NOTE: it has Barrel inserts for the 20, 28 and 410 gauges. A must have!!! UPC ECOM00174677 Gauge 12 / 20 / 28 / 410 GA Finish BLUED W/ ENGRAVING Capacity 2 ROUNDS Weight NOT SPECIFIED Action OVER UNDER Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length 28 BARREL Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED BROWNING CITORI SKEET quantity

Buy Mk18 Online Features Aluminum alloy fully licensed Daniel Defense receiver with stamped Daniel Defense markings Aluminum alloy licensed Daniel Defense MK18 20mm rail, ideal for grenade launchers, optics and other 20mm accessories G&P ver2 metal gearbox w/ pre-installed GATE ASTER Programmable MOSFET App-based control station gives you total control over your AEG Adjustable length of pull CRANE style stock Polymer flip up front and rear sights 8mm bearings for improved durability and lifespan G&P M140 high torque motor

The Beretta ARX 100 . 223 REM/5.56 NATO Semiautomatic Rifle is a fully modifiable rifle with a pinless design and Picatinny rails on the top, sides and fore-end. The rifle is equipped with a removable, adjustable flip-up rear sight and features a 30-round magazine and a short-stroke gas piston system. UPC ECOM00025968 Caliber 223 REM/5.56 NATO Finish BLACK Capacity 15 ROUNDS Weight NOT SPECIFIED Action NOT SPECIFIED Frame Material NOT SPECIFIED Slide Material NOT SPECIFIED Barrel Length NOT SPECIFIED Receiver Material NOT SPECIFIED Receiver Finish NOT SPECIFIED

New unfired direct from the factory Ruger AR-556. Rifle is equiped with quad rail, fore grip with bi pod, and flip up rear sight. This semi-automatic M4-style direct impingement modern sporting rifle offers an affordable, American-made modern rifle with the rugged reliability that we have come to expect from Ruger. Extensively tested during its development, the AR-556 is constructed from top-quality components, including forged 7075-T6 aluminum upper and lower receivers and a cold hammer-forged chrome-moly steel barrel with M4 feed ramp cuts. Chambered in 5.56 NATO, the AR-556's carbine-length, flat-top, M4 design is fully configured with a Ruger Rapid Deploy folding rear sight, milled F-height gas block with post front sight, forward assist, dust cover, brass deflector, telescoping six-position stock, improved trigger-reach grip, enlarged trigger guard and one 30-round Magpul PMag. Standardized M4/AR components are utilized throughout, so the AR-556 can be customized easily.

The Kel-Tec SUB2000 GLOCK folding carbine rifle uses reliable Glock magazines for compatibility with the pistol you already own. Don’t own a Glock? No problem. The SUB2000 GLOCK is still a great choice. Glock magazines are among the most reliable and commonly available magazines out there and come in a wide variety of capacities from 10 round compliant magazines to high capacity drums. The folding SUB2000 is a pistol caliber carbine that can be stored or transported in a small space yet quickly deployed when you need it. The 16.25? barrel of this versatile carbine translates into additional accuracy, velocity, and downrange firepower to most out of your pistol ammunition. The SUB2000 is adaptable to your requirements thanks to Picatinny rails and M-Lok compatibility. Designed with a straight blow-back system, the SUB2000 is very simple, reliable and easy to maintain. With two decades of use, the SUB2000 is a proven platform. The sights are intuitive, the stock is adjustable and field stripping is a breeze. The SUB2000 is the perfect survival gun, Ideal for backpacking, as a backup in your truck, or stored in your home. But no matter what your reason for owning it, the SUB2000 is simply fun to shoot. ITEM INFO CATEGORY: Rifles TYPE: Semi-Automatic Rilfes BRAND: Kel-Tec MODEL: Kel-Tec rifles CALIBER: 9mm TECH SPECS CAPACITY: 17+1 WEIGHT: 45 MATERIAL: Green SIGHT: PURPOSE: Semi Auto Rifles

LIKE NEW Freedom Ordnance FX-9 9MM. 16? Barrel. Comes with 33 round magazine. Comes with factory box. Like new except for a small amount of wear on handguard(shown in pictures). Seller must collect sales tax. UPC 856169007004 Caliber 9MM LUGER (9X19 PARA) Capacity 33+1 ROUNDS Barrel Length 16? BARREL Weight 6.1 LBS. Finish BLACK Action SEMI AUTO

It’s a hoot to shoot for sure and maybe more so than my SP5 (just maybe). So trying out a few options and started farkling out the PDW. Starting out with the following: Rear Drum (thx to @ Indreams84) Magpul forend/handguard HS1 finger light (green laser). Had to dremel out a hole for HS1 laser to poke/emitt through. Worked out great. JMAC Brace 8” raised arm bar 1913 SigMech folder Cheekweld affixed to top of brace (holes are predrilled and threaded) Gearworks Tailhook MOD1C Also saw the B&T retractable stock at LGS as another option that I’m going to ponder on: Per the measurements it seems that when retracted with MAGPUL forend/handguard appears to be issue. It would appear to be an unfavorable check rest but guess one can adjust and get used to it. It would appear the small end, would not seat great in shoulder/pec area, but again guess you can find a good area to pocket it into and get used to it quickly. Appears to retract really nice and seems compact and extends easily, and seems like great lockup with very minor up/down flex, hopefully minimal rubbing along body frame. so will also soon consider the Vertical grip and will need to pay it visit at the LGS soon again while pending the process. The JMAC Brace Pros: It’s a Brace and cheek hold is really comfortable and supportive. if you wanted to add an RMR/Optic it’s adjustable to slide up and down via the pic-rail and sig mech. I ended up cutting out the foam and was able to fit in it’s folded condition. It’s tight and although does fully seat, it closes and works out fine. Let’s see your SP5K-PDW Stock or Brace here in order to see the various options out there for the PDW.